W25Q32JWSSIM TR

{
  "slug": "w25q32jwssim-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Winbond Elec NOR FLASH, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "w25q32jwssim tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "w25q32jwssim-tr.kicad_sym",
    "w25q32jwssim-tr.kicad_mod",
    "w25q32jwssim-tr.glb",
    "w25q32jwssim-tr.step",
    "w25q32jwssim-tr.lbr",
    "docs/hero.png",
    "docs/w25q32jwssim-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "w25q32jwssim-tr-hero.glb",
    "w25q32jwssim-tr-hero.overlay.json",
    "w25q32jwssim-tr-etched.glb"
  ],
  "component": {
    "mpn": "W25Q32JWSSIM TR",
    "manufacturer": "Winbond Elec",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602831985404624896",
    "parts": {
      "symbol": "w25q32jwssim-tr.kicad_sym",
      "footprint": "w25q32jwssim-tr.kicad_mod",
      "model_3d": "w25q32jwssim-tr-hero.glb",
      "model_3d_plain": "w25q32jwssim-tr-etched.glb",
      "model_3d_step": "w25q32jwssim-tr-etched.step",
      "model_3d_step_plain": "w25q32jwssim-tr.step",
      "lbr": "w25q32jwssim-tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C6750445"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T20:13:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "/CS",
        "type": "input",
        "description": "Chip Select Input: when /CS is high the device is deselected and the serial data outputs are at high impedance, and /CS must go from high to low before a new instruction is accepted after power-up."
      },
      {
        "number": "2",
        "name": "DO (IO1)",
        "type": "bidirectional",
        "description": "Data Output (Data Input Output 1), used as the unidirectional data output in Standard SPI and as bidirectional IO1 in Dual and QPI/Quad SPI operation."
      },
      {
        "number": "3",
        "name": "/WP (IO2)",
        "type": "bidirectional",
        "description": "Write Protect Input (Data Input Output 2): active-low pin that, with the Status Register CMP, SEC, TB, BP[2:0] and SRP bits, protects the array or Status Register from writes, and becomes IO2 when QE=1, where the write-protect function is unavailable."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "DI (IO0)",
        "type": "bidirectional",
        "description": "Data Input (Data Input Output 0), used as the unidirectional data input in Standard SPI and as bidirectional IO0 in Dual and Quad/QPI operation."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "Serial Clock Input providing the timing for serial input and output operations."
      },
      {
        "number": "7",
        "name": "/HOLD or /RESET (IO3)",
        "type": "bidirectional",
        "description": "Hold or Reset Input (Data Input Output 3): when QE=0 it is /HOLD (active low, pauses Standard/Dual SPI operation while /CS is low) or /RESET per the HOLD/RST status bit, and when QE=1 it is IO3 with the /HOLD and /RESET functions disabled."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power Supply: single 1.7V to 1.95V supply, with the /CS pin tracking VCC at power-up and power-down."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types are set to bidirectional because the datasheet labels them I/O (IO0–IO3 shared with SPI si; Pin numbers come from the section 3.3 pin table (SOIC/VSOP 208-mil). The Figure 1a pin diagram is im"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0941,
        "at": "2026-10-18T20:11:46"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602831985404624896",
        "pages": 104,
        "sha256": "cda2ab0a82645468",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "w25q32jwssim-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "w25q32jwssim-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a700245f6544466a2c9474178fcd962af084a1f26d2e6a9acd18345da81e2cf5",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}