main
Ray Publish 0.1.0 620fa19
{
  "slug": "w25q256jveiq",
  "version": "0.1.0",
  "type": "component",
  "description": "Winbond NOR FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "w25q256jveiq",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "w25q256jveiq.kicad_sym",
    "w25q256jveiq.kicad_mod",
    "w25q256jveiq.glb",
    "w25q256jveiq.step",
    "w25q256jveiq.lbr",
    "docs/hero.png",
    "docs/w25q256jveiq-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "w25q256jveiq-hero.glb",
    "w25q256jveiq-hero.overlay.json"
  ],
  "component": {
    "mpn": "W25Q256JVEIQ",
    "manufacturer": "Winbond",
    "package": "WSON-8-EP(6x8)",
    "pin_count": 9,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://www.winbond.com/resource-files/w25q256jv%20spi%20revg%2008032017.pdf",
    "parts": {
      "symbol": "w25q256jveiq.kicad_sym",
      "footprint": "w25q256jveiq.kicad_mod",
      "model_3d": "w25q256jveiq-hero.glb",
      "model_3d_plain": "w25q256jveiq.glb",
      "model_3d_step": "w25q256jveiq-etched.step",
      "model_3d_step_plain": "w25q256jveiq.step",
      "lbr": "w25q256jveiq.lbr"
    },
    "distributor_links": {
      "lcsc": "C97522",
      "digikey": "256-W25Q256JVEIQ-TUBE-ND",
      "mouser": "454-W25Q256JVEIQ"
    },
    "distributor_check": {
      "checked_at": "2026-11-17T00:01:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "256-W25Q256JVEIQ-TUBE-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "454-W25Q256JVEIQ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "/CS",
        "type": "input",
        "description": "Chip Select input that enables and disables device operation; the device is deselected with /CS high, and it accepts instructions only after /CS transitions from high to low following power-up."
      },
      {
        "number": "2",
        "name": "DO (IO1)",
        "type": "bidirectional",
        "description": "Data Output (IO1) used for standard and dual SPI, driven on the falling edge of CLK and at high impedance when the device is deselected."
      },
      {
        "number": "3",
        "name": "/WP (IO2)",
        "type": "bidirectional",
        "description": "Write Protect input, active low, used with the Status Register protect bits to prevent Status Register writes, and it becomes IO2 for Quad SPI when QE=1."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "DI (IO0)",
        "type": "bidirectional",
        "description": "Data Input (IO0) used for standard and dual SPI, which latches instructions, addresses and data on the rising edge of CLK."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "Serial Clock input that provides the timing for serial input and output operations, with clock frequencies up to 133MHz supported."
      },
      {
        "number": "7",
        "name": "/HOLD or /RESET (IO3)",
        "type": "bidirectional",
        "description": "Hold input (active low) that pauses the device while selected, or Reset input, and it becomes IO3 for Quad SPI when QE=1, which disables the HOLD function."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input, specified for a single 2.7V to 3.6V supply."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pad 7 is labeled /HOLD or /RESET (IO3), but the datasheet notes say the hardware /RESET pin is only ; The datasheet pinout covers the 8 numbered pads only. It does not describe the exposed thermal pad (",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0387,
        "at": "2026-11-17T00:01:02"
      },
      "datasheet": {
        "url": "https://www.winbond.com/resource-files/w25q256jv%20spi%20revg%2008032017.pdf",
        "pages": 92,
        "sha256": "0f18a76476aee735",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "WSON",
        "height_mm": 0.75,
        "height_basis": "family nominal (no datasheet A read)",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "w25q256jveiq.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "91d2538a5f0f80a408aae07d1786dc08148c337bfe24e70c62d31b22087e07ce",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "w25q256jveiq-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2980233554bbfcf38ab05c8dfba5a7ea35e0c73116da81b88a768522894608c8",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}