W25N01GWZEIG TR

{
  "slug": "w25n01gwzeig-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Winbond Elec NAND FLASH, WSON-8(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "w25n01gwzeig tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "w25n01gwzeig-tr.kicad_sym",
    "w25n01gwzeig-tr.kicad_mod",
    "w25n01gwzeig-tr.glb",
    "w25n01gwzeig-tr.step",
    "w25n01gwzeig-tr.lbr",
    "docs/hero.png",
    "docs/w25n01gwzeig-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "w25n01gwzeig-tr-hero.glb",
    "w25n01gwzeig-tr-hero.overlay.json",
    "w25n01gwzeig-tr-etched.glb"
  ],
  "component": {
    "mpn": "W25N01GWZEIG TR",
    "manufacturer": "Winbond Elec",
    "package": "WSON-8(6x8)",
    "pin_count": 9,
    "category": "Memory",
    "subcategory": "NAND FLASH",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9b448daabe5bf90515447ed1db743104.pdf",
    "parts": {
      "symbol": "w25n01gwzeig-tr.kicad_sym",
      "footprint": "w25n01gwzeig-tr.kicad_mod",
      "model_3d": "w25n01gwzeig-tr-hero.glb",
      "model_3d_plain": "w25n01gwzeig-tr-etched.glb",
      "model_3d_step": "w25n01gwzeig-tr-etched.step",
      "model_3d_step_plain": "w25n01gwzeig-tr.step",
      "lbr": "w25n01gwzeig-tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C17589962",
      "digikey": "256-W25N01GWZEIGTR-ND",
      "mouser": "454-W25N01GWZEIGTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T09:28:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "256-W25N01GWZEIGTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "454-W25N01GWZEIGTR",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "/CS",
        "type": "input",
        "description": "Chip Select Input; when high the device is deselected and the DO/IO pins are high impedance, and /CS must track the VCC supply level at power-up and power-down."
      },
      {
        "number": "2",
        "name": "DO (IO1)",
        "type": "bidirectional",
        "description": "Data Output (Data Input Output 1) used for Standard and Dual SPI instructions, with data read on the falling edge of CLK."
      },
      {
        "number": "3",
        "name": "/WP (IO2)",
        "type": "bidirectional",
        "description": "Write Protect Input (Data Input Output 2) that acts as IO2 for Quad SPI and as an active-low write protect input when WP-E=1, where /WP tied to GND disables all write, program and erase functions."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "DI (IO0)",
        "type": "bidirectional",
        "description": "Data Input (Data Input Output 0) used for Standard and Dual SPI instructions, with instructions, addresses and data written on the rising edge of CLK."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "Serial Clock Input that provides the timing for serial input and output operations."
      },
      {
        "number": "7",
        "name": "/HOLD (IO3)",
        "type": "bidirectional",
        "description": "Hold Input (Data Input Output 3) that pauses Standard/Dual SPI operation when driven low while /CS is low and must be driven high or pulled up so it does not float."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power Supply pin; the device operates on a single 1.70V to 1.95V supply."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN suffix 'TR' (tape and reel) is not listed in the ordering information. The datasheet only sa; The package hint 'WSON-8(6x8)' is written as 6x8, but the datasheet names this package 8-pad WSON 8x; The datasheet's pad table and pin descriptions are on page 8, which is included in the extract. The ",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 19,
        "cost_usd": 0.082,
        "at": "2026-10-21T09:22:14"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/9b448daabe5bf90515447ed1db743104.pdf",
        "pages": 70,
        "sha256": "a464346853af1dd0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "w25n01gwzeig-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "36f24b84d8b2e1365ec75a0478f9ae7cbcb4b552e72f772d4d454480a4f3a866",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "w25n01gwzeig-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5e5b1ffd56ae5bb642e40cde6e6d1d21e3b0742bec98ea3dcca3bbecc3c1e66c",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}