main
History Download
Ray Publish 0.1.0 966ff44

VRH3401NTX

AnaSem · Linear Voltage Regulators (LDO) · SOT-23-5

VRH3401NTX from AnaSem, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Voltage input, with an absolute maximum range of -0.3 V to +7.0 V and an operating voltage range of 1.6 V to 6.0 V.
2 VSS power_in Power ground, which is the reference for the output voltage range (VOUT absolute range VSS-0.3 V to VIN+0.3 V).
3 EN input Chip enable; setting EN to VSS discharges the charged output capacitor through an internal switch so VOUT quickly returns to VSS.
4 NC unconnected Non-connection pin, left open.
5 VOUT power_out Regulated output with a maximum output current of 250 mA and an absolute output voltage range of VSS-0.3 V to VIN+0.3 V.

Key specifications

Parameter Value
Manufacturer AnaSem
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy (headline ±1%) VOUT -1 1 % VOUT≧1.95V, VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C 6
Input voltage range (absolute maximum) VIN -0.3 7 V 5
Output current (absolute maximum) IOUT 500 mA 5
Power dissipation, SOT-25 PD 600 mW SOT-25 package, mounted on PCB 50mm×50mm×1.6mm (note 1) 5
Operating temperature range TOPR -40 85 °C 5
Storage temperature range TSTG -55 125 °C 5
Input voltage VIN 1.6 6 V 7
Current consumption IDD 25 40 µA VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA 7
Standby current ISTB 0.01 0.1 µA EN=VSS 7
Load regulation ∆VOUT 10 40 mV VIN=VOUT+1.0V, IOUT=0.1mA ~ 100mA 7
Line regulation ∆VOUT / ∆VIN•VOUT 0.01 0.1 %/V VOUT+1.0V≦VIN≦6.0V, IOUT=30mA 7
Limit current ILIMIT 300 mA EN=VIN 7
Short circuit current ISHORT 40 mA VIN=VOUT+1.0V, VOUT=0V 7
Output voltage temperature coefficient ∆VOUT / ∆Ta•VOUT -20 20 ppm/°C VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C 7
EN high level voltage VENH 1.2 6 V 7
EN low level voltage VENL 0.3 V 7
EN high level current IENH 0.25 5 µA VEN=VIN=5V 7
EN low level current IENL -0.1 0.1 µA VEN=VSS 7
CL auto-discharge resistance RDIS 160 Ω VIN=6.0V, VOUT=4.0V, VEN=VSS 7
Ripple rejection Rr 75 dB VIN=VOUT+1.0V, f=1KHz, ∆VRIP=0.5VP-P, IOUT=30mA 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: VRH3401NTX
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: vrh3401ntx-etched.step / vrh3401ntx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vrh3401ntx.step / vrh3401ntx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: AnaSem datasheet (35 pp, sha256 b9bb74b00e80c8df, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF