3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownVRH3401NTX
AnaSem · Linear Voltage Regulators (LDO) · SOT-23-5
VRH3401NTX from AnaSem, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage input, with an absolute maximum range of -0.3 V to +7.0 V and an operating voltage range of 1.6 V to 6.0 V. |
| 2 | VSS | power_in | Power ground, which is the reference for the output voltage range (VOUT absolute range VSS-0.3 V to VIN+0.3 V). |
| 3 | EN | input | Chip enable; setting EN to VSS discharges the charged output capacitor through an internal switch so VOUT quickly returns to VSS. |
| 4 | NC | unconnected | Non-connection pin, left open. |
| 5 | VOUT | power_out | Regulated output with a maximum output current of 250 mA and an absolute output voltage range of VSS-0.3 V to VIN+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AnaSem |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (headline ±1%) | VOUT | -1 | 1 | % | VOUT≧1.95V, VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C | 6 | |
| Input voltage range (absolute maximum) | VIN | -0.3 | 7 | V | 5 | ||
| Output current (absolute maximum) | IOUT | 500 | mA | 5 | |||
| Power dissipation, SOT-25 | PD | 600 | mW | SOT-25 package, mounted on PCB 50mm×50mm×1.6mm (note 1) | 5 | ||
| Operating temperature range | TOPR | -40 | 85 | °C | 5 | ||
| Storage temperature range | TSTG | -55 | 125 | °C | 5 | ||
| Input voltage | VIN | 1.6 | 6 | V | 7 | ||
| Current consumption | IDD | 25 | 40 | µA | VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA | 7 | |
| Standby current | ISTB | 0.01 | 0.1 | µA | EN=VSS | 7 | |
| Load regulation | ∆VOUT | 10 | 40 | mV | VIN=VOUT+1.0V, IOUT=0.1mA ~ 100mA | 7 | |
| Line regulation | ∆VOUT / ∆VIN•VOUT | 0.01 | 0.1 | %/V | VOUT+1.0V≦VIN≦6.0V, IOUT=30mA | 7 | |
| Limit current | ILIMIT | 300 | mA | EN=VIN | 7 | ||
| Short circuit current | ISHORT | 40 | mA | VIN=VOUT+1.0V, VOUT=0V | 7 | ||
| Output voltage temperature coefficient | ∆VOUT / ∆Ta•VOUT | -20 | 20 | ppm/°C | VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C | 7 | |
| EN high level voltage | VENH | 1.2 | 6 | V | 7 | ||
| EN low level voltage | VENL | 0.3 | V | 7 | |||
| EN high level current | IENH | 0.25 | 5 | µA | VEN=VIN=5V | 7 | |
| EN low level current | IENL | -0.1 | 0.1 | µA | VEN=VSS | 7 | |
| CL auto-discharge resistance | RDIS | 160 | Ω | VIN=6.0V, VOUT=4.0V, VEN=VSS | 7 | ||
| Ripple rejection | Rr | 75 | dB | VIN=VOUT+1.0V, f=1KHz, ∆VRIP=0.5VP-P, IOUT=30mA | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
VRH3401NTX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
vrh3401ntx-etched.step/vrh3401ntx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vrh3401ntx.step/vrh3401ntx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AnaSem datasheet (35 pp, sha256
b9bb74b00e80c8df, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).