main
History Download
Ray Publish 0.1.0 1ea6e71

VRH2801NSX

AnaSem · Linear Voltage Regulators (LDO) · SOT-25

VRH2801NSX from AnaSem, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Voltage input; the operating input range is 1.6V to 6.0V, with an absolute maximum range of -0.3V to +7.0V, and a CIN of at least 1.0µF is recommended between VIN and VSS.
2 VSS power_in Power ground; the output capacitor CL (ceramic, at least 1.0µF) must be connected between VOUT and VSS as close as possible.
3 EN input Chip enable; EN high level is 1.2V to 6.0V and EN low level is 0.3V max, and setting EN to VSS shuts the regulator down and discharges CL through RDIS (160Ω typ.).
4 NC unconnected Non connection (open); leave unconnected.
5 VOUT power_out Output; output current is rated up to 500mA (absolute maximum), and VOUT must not exceed VIN+0.3V to avoid reverse current through the parasitic diode.

Key specifications

Parameter Value
Manufacturer AnaSem
Package SOT-25
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN -0.3 7 V 7
Output current IOUT 500 mA 7
Power dissipation SOT-25 PD 600 mW Depends on board mounting; PCB 50mm×50mm×1.6mm 7
Operating temperature range TOPR -40 85 °C 7
Storage temperature range TSTG -55 125 °C 7
Output voltage accuracy (±1% per title; table gives VOUT×0.99 / VOUT×1.01) VOUT -1 1 % VOUT≧1.95V, VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C 8
Dropout voltage VDROP 100 150 mV IOUT=100mA, 2.3V≦VOUT≦2.85V 8
Current consumption IDD 25 40 μA VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA 9
Standby current ISTB 0.01 0.1 μA EN=VSS 9
Input voltage VIN 1.6 6 V 9
Load regulation ΔVOUT 10 40 mV VIN=VOUT+1.0V, IOUT=0.1mA ~ 100mA 9
Line regulation ΔVOUT / ΔVIN•VOUT 0.01 0.1 %/V VOUT+1.0V≦VIN≦6.0V, IOUT=30mA 9
Limit current ILIMIT 300 mA EN=VIN 9
Output voltage temperature coefficient ∆VOUT / ∆Ta•VOUT -20 20 ppm/°C VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C 9
EN high level voltage VENH 1.2 6 V 9
EN low level voltage VENL 0.3 V 9
EN high level current IENH 0.25 5 μA VEN= VIN=5V 9
EN low level current IENL -0.1 0.1 μA VEN= VSS 9
Output current IOUT 250 mA VIN≧VOUT+1.0V, 2.3V≦VOUT≦2.85V 8
Ripple rejection Rr 75 dB VIN=VOUT+1.0V, f=1KHz, ∆VRIP=0.5VP-P, IOUT=30mA 9
Short circuit current ISHORT 40 mA VIN=VOUT+1.0V, VOUT=0V 9
CL auto-discharge resistance RDIS 160 Ω VIN=6.0V, VOUT=4.0V, VEN= VSS 9

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: VRH2801NSX
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: vrh2801nsx-etched.step / vrh2801nsx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vrh2801nsx.step / vrh2801nsx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: AnaSem datasheet (43 pp, sha256 4ccae94e33193ae7, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF