Generated by kicad-footprint-generator · KiCad file format 20260206
VRH2801NSX
AnaSem · Linear Voltage Regulators (LDO) · SOT-25
VRH2801NSX from AnaSem, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage input; the operating input range is 1.6V to 6.0V, with an absolute maximum range of -0.3V to +7.0V, and a CIN of at least 1.0µF is recommended between VIN and VSS. |
| 2 | VSS | power_in | Power ground; the output capacitor CL (ceramic, at least 1.0µF) must be connected between VOUT and VSS as close as possible. |
| 3 | EN | input | Chip enable; EN high level is 1.2V to 6.0V and EN low level is 0.3V max, and setting EN to VSS shuts the regulator down and discharges CL through RDIS (160Ω typ.). |
| 4 | NC | unconnected | Non connection (open); leave unconnected. |
| 5 | VOUT | power_out | Output; output current is rated up to 500mA (absolute maximum), and VOUT must not exceed VIN+0.3V to avoid reverse current through the parasitic diode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AnaSem |
| Package | SOT-25 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | -0.3 | 7 | V | 7 | ||
| Output current | IOUT | 500 | mA | 7 | |||
| Power dissipation SOT-25 | PD | 600 | mW | Depends on board mounting; PCB 50mm×50mm×1.6mm | 7 | ||
| Operating temperature range | TOPR | -40 | 85 | °C | 7 | ||
| Storage temperature range | TSTG | -55 | 125 | °C | 7 | ||
| Output voltage accuracy (±1% per title; table gives VOUT×0.99 / VOUT×1.01) | VOUT | -1 | 1 | % | VOUT≧1.95V, VOUT+1.0V≦VIN≦6.0V, IOUT=30mA, Ta=-40°C ~ +85°C | 8 | |
| Dropout voltage | VDROP | 100 | 150 | mV | IOUT=100mA, 2.3V≦VOUT≦2.85V | 8 | |
| Current consumption | IDD | 25 | 40 | μA | VIN=VOUT+1.0V, VOUT=Open, IOUT=0mA | 9 | |
| Standby current | ISTB | 0.01 | 0.1 | μA | EN=VSS | 9 | |
| Input voltage | VIN | 1.6 | 6 | V | 9 | ||
| Load regulation | ΔVOUT | 10 | 40 | mV | VIN=VOUT+1.0V, IOUT=0.1mA ~ 100mA | 9 | |
| Line regulation | ΔVOUT / ΔVIN•VOUT | 0.01 | 0.1 | %/V | VOUT+1.0V≦VIN≦6.0V, IOUT=30mA | 9 | |
| Limit current | ILIMIT | 300 | mA | EN=VIN | 9 | ||
| Output voltage temperature coefficient | ∆VOUT / ∆Ta•VOUT | -20 | 20 | ppm/°C | VEN=VIN, IOUT=300mA, Ta=-40°C ~ +85°C | 9 | |
| EN high level voltage | VENH | 1.2 | 6 | V | 9 | ||
| EN low level voltage | VENL | 0.3 | V | 9 | |||
| EN high level current | IENH | 0.25 | 5 | μA | VEN= VIN=5V | 9 | |
| EN low level current | IENL | -0.1 | 0.1 | μA | VEN= VSS | 9 | |
| Output current | IOUT | 250 | mA | VIN≧VOUT+1.0V, 2.3V≦VOUT≦2.85V | 8 | ||
| Ripple rejection | Rr | 75 | dB | VIN=VOUT+1.0V, f=1KHz, ∆VRIP=0.5VP-P, IOUT=30mA | 9 | ||
| Short circuit current | ISHORT | 40 | mA | VIN=VOUT+1.0V, VOUT=0V | 9 | ||
| CL auto-discharge resistance | RDIS | 160 | Ω | VIN=6.0V, VOUT=4.0V, VEN= VSS | 9 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
VRH2801NSX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2000000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
vrh2801nsx-etched.step/vrh2801nsx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vrh2801nsx.step/vrh2801nsx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AnaSem datasheet (43 pp, sha256
4ccae94e33193ae7, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).