VRD1825MTX

{
  "slug": "vrd1825mtx",
  "version": "0.1.0",
  "type": "component",
  "description": "AnaSem Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "vrd1825mtx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "vrd1825mtx.kicad_sym",
    "vrd1825mtx.kicad_mod",
    "vrd1825mtx.glb",
    "vrd1825mtx.step",
    "vrd1825mtx.lbr",
    "docs/hero.png",
    "docs/vrd1825mtx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "vrd1825mtx-hero.glb",
    "vrd1825mtx-hero.overlay.json",
    "vrd1825mtx-etched.glb"
  ],
  "component": {
    "mpn": "VRD1825MTX",
    "manufacturer": "AnaSem",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916057121689600",
    "parts": {
      "symbol": "vrd1825mtx.kicad_sym",
      "footprint": "vrd1825mtx.kicad_mod",
      "model_3d": "vrd1825mtx-hero.glb",
      "model_3d_plain": "vrd1825mtx-etched.glb",
      "model_3d_step": "vrd1825mtx-etched.step",
      "model_3d_step_plain": "vrd1825mtx.step",
      "lbr": "vrd1825mtx.lbr"
    },
    "distributor_links": {
      "lcsc": "C697919"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T07:44:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN1",
        "type": "input",
        "description": "Channel-1 enable input; EN is driven to VSS to shut down the regulator and discharge the output through the auto-discharge resistance, with EN high level minimum 1.2V and EN low level maximum 0.3V."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Voltage input for both regulators; operating input range is 1.6V to 6.0V and absolute maximum input is -0.3V to +7.0V, with a recommended input capacitor of at least 1.0µF to VSS."
      },
      {
        "number": "3",
        "name": "EN2",
        "type": "input",
        "description": "Channel-2 enable input; EN is driven to VSS to shut down the regulator and discharge the output through the auto-discharge resistance, with EN high level minimum 1.2V and EN low level maximum 0.3V."
      },
      {
        "number": "4",
        "name": "VOUT2",
        "type": "power_out",
        "description": "Channel-2 regulated output that requires a ceramic output capacitor of at least 1.0µF connected close to the pin and VSS, and must not exceed VIN+0.3V to avoid damage through the parasitic diode."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Power ground (common return for both channels); output and input capacitors should be connected as close as possible between their terminals and VSS."
      },
      {
        "number": "6",
        "name": "VOUT1",
        "type": "power_out",
        "description": "Channel-1 regulated output that requires a ceramic output capacitor of at least 1.0µF connected close to the pin and VSS, and must not exceed VIN+0.3V to avoid damage through the parasitic diode."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package hint says SOT-23-6, but the datasheet names this package SOT-26 (2.9×2.8×1.1mm). The MPN suf; The datasheet also defines an LLP-6 package (1.8×2.0×0.6mm) with a different pin order. It was not u"
        ],
        "pages_sent": 35,
        "cost_usd": 0.1106,
        "at": "2026-10-18T07:43:34"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916057121689600",
        "pages": 35,
        "sha256": "7f8a0b5646548c27",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "vrd1825mtx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "vrd1825mtx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4693e95a9b1d9cfd3e20d5e9b861c6e76419e527c24c594c64b2fae2356e3176",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}