main
Ray
Publish 0.1.0
a0616e6
VRB2412LD-20WR3
YLPTEC · Isolated Power Modules · DIP-6
VRB2412LD-20WR3 from YLPTEC, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -Vin | power_in | Negative input terminal of the 24 Vdc nominal (18~36 Vdc) input range, and the reference for the Ctrl pin voltage. |
| 2 | +Vin | power_in | Positive input terminal for the 24 Vdc nominal (18~36 Vdc) input, with an input surge limit of 50 Vdc max and undervoltage protection at 5.5 V min / 6.5 V typ. |
| 3 | +Vo | power_out | Positive 12 Vdc output, 1667 mA max load, with output overvoltage, overcurrent and continuous self-recovering short-circuit protection. |
| 4 | Trim | passive | Labelled Trim (voltage trim) in the single-output pin table, but the output specification states no adjustment terminal (无调节端). |
| 5 | GND | power_in | Output ground, the return for +Vo. |
| 6 | CTRL | input | Remote on/off: module is on when Ctrl is open or at TTL high (3.5-12 VDC) and off when tied to GND or low (0-1.2 VDC), referenced to input -Vin, with 1 mA typ / 2 mA max input current when off. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YLPTEC |
| Package | DIP-6 |
| Category | Power Modules |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (24V nominal series) | Vin | 18 | 24 | 36 | Vdc | 1 | |
| Output voltage | Vo | 12 | Vdc | nominal | 1 | ||
| Output current | Io | 0 | 1667 | mA | Max./Min. | 1 | |
| Maximum capacitive load | 2200 | μF | 1 | ||||
| Efficiency at full load | 88 | 90 | % | Min/Typ, full load | 1 | ||
| Ripple & noise | 50 | 80 | mVp-p | full load, 20MHz bandwidth, resistive load | 1 | ||
| Input current full load | 926 | 946 | mA | 24VDC series, 12.0V output, nominal input voltage | 2 | ||
| Input current no load | 1.5 | 2 | mA | 24VDC series, 12.0V output, nominal input voltage | 2 | ||
| Reflected ripple current | 40 | mA | 24VDC series, nominal input voltage | 3 | |||
| Surge voltage (1sec max) | Isec.max | -0.7 | 50 | VDC | 24VDC series, nominal input voltage | 3 | |
| Start-up voltage | 9 | VDC | 24VDC series, nominal input voltage | 3 | |||
| Input undervoltage protection | 5.5 | 6.5 | VDC | 24VDC series, nominal input voltage | 3 | ||
| Start-up time | 1 | mS | nominal input voltage and constant resistive load | 3 | |||
| Input current when shut down | 1 | 2 | mA | 3 | |||
| Ctrl high level (module on) | 3.5 | 12 | VDC | Ctrl floating or TTL high | 3 | ||
| Ctrl low level (module off) | 0 | 1.2 | VDC | Ctrl to GND or low level | 3 | ||
| Output load | 0 | 100 | % | load percentage | 3 | ||
| Output voltage accuracy | -2 | 1 | 2 | % | +Vo1; typ printed ±1.0% | 3 | |
| Line regulation | -0.5 | 0.2 | 0.5 | % | input voltage range; typ printed ±0.2% | 3 | |
| Load regulation | -1 | 0.5 | 1 | % | 20% ~ 100% rated load, balanced load; typ printed ±0.5% | 3 | |
| Startup delay time | 1 | ms | 3 | ||||
| Dynamic response step deviation | -5 | 3 | 5 | % | 25% nominal load step; typ printed ±3.0% | 4 | |
| Dynamic response recovery time | 300 | 500 | μs | 25% nominal load step | 4 | ||
| Output overvoltage protection | 110 | 160 | %Vo | full input voltage range | 4 | ||
| Output overcurrent protection | 110 | 150 | 200 | %Io | full input voltage range | 4 | |
| Isolation voltage | 1500 | VDC | input-output, test time 1 minute, leakage current less than 1mA | 4 | |||
| Isolation resistance | 1000 | MΩ | input-output, insulation voltage 500VDC | 4 | |||
| Isolation capacitance | 1000 | pF | input-output, 100KHz/0.1V | 4 | |||
| Operating temperature | -40 | 85 | °C | see temperature derating curve | 4 | ||
| Storage temperature | -40 | 125 | °C | 4 | |||
| Maximum case temperature | 100 | °C | operating | 4 | |||
| Storage humidity | 5 | 95 | %RH | non-condensing | 4 | ||
| Lead soldering temperature | 300 | °C | solder point 1.5mm from case, 10 seconds | 4 | |||
| Switching frequency | 250 | KHz | PWM mode | 4 |
CAD (KiCad official)
- Symbol:
VRB2412LD-20WR3 - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
vrb2412ld-20wr3-etched.step/vrb2412ld-20wr3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vrb2412ld-20wr3.step/vrb2412ld-20wr3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: YLPTEC datasheet (7 pp, sha256
61c243f0797df2e9, retrieved 2026-10-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# VRB2412LD-20WR3
**YLPTEC** · Isolated Power Modules · DIP-6
VRB2412LD-20WR3 from YLPTEC, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -Vin | power_in | Negative input terminal of the 24 Vdc nominal (18~36 Vdc) input range, and the reference for the Ctrl pin voltage. |
| 2 | +Vin | power_in | Positive input terminal for the 24 Vdc nominal (18~36 Vdc) input, with an input surge limit of 50 Vdc max and undervoltage protection at 5.5 V min / 6.5 V typ. |
| 3 | +Vo | power_out | Positive 12 Vdc output, 1667 mA max load, with output overvoltage, overcurrent and continuous self-recovering short-circuit protection. |
| 4 | Trim | passive | Labelled Trim (voltage trim) in the single-output pin table, but the output specification states no adjustment terminal (无调节端). |
| 5 | GND | power_in | Output ground, the return for +Vo. |
| 6 | CTRL | input | Remote on/off: module is on when Ctrl is open or at TTL high (3.5-12 VDC) and off when tied to GND or low (0-1.2 VDC), referenced to input -Vin, with 1 mA typ / 2 mA max input current when off. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YLPTEC |
| Package | DIP-6 |
| Category | Power Modules |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (24V nominal series) | Vin | 18 | 24 | 36 | Vdc | | 1 |
| Output voltage | Vo | | 12 | | Vdc | nominal | 1 |
| Output current | Io | 0 | | 1667 | mA | Max./Min. | 1 |
| Maximum capacitive load | | | | 2200 | μF | | 1 |
| Efficiency at full load | | 88 | 90 | | % | Min/Typ, full load | 1 |
| Ripple & noise | | | 50 | 80 | mVp-p | full load, 20MHz bandwidth, resistive load | 1 |
| Input current full load | | | 926 | 946 | mA | 24VDC series, 12.0V output, nominal input voltage | 2 |
| Input current no load | | | 1.5 | 2 | mA | 24VDC series, 12.0V output, nominal input voltage | 2 |
| Reflected ripple current | | | 40 | | mA | 24VDC series, nominal input voltage | 3 |
| Surge voltage (1sec max) | Isec.max | -0.7 | | 50 | VDC | 24VDC series, nominal input voltage | 3 |
| Start-up voltage | | | | 9 | VDC | 24VDC series, nominal input voltage | 3 |
| Input undervoltage protection | | 5.5 | 6.5 | | VDC | 24VDC series, nominal input voltage | 3 |
| Start-up time | | | 1 | | mS | nominal input voltage and constant resistive load | 3 |
| Input current when shut down | | | 1 | 2 | mA | | 3 |
| Ctrl high level (module on) | | 3.5 | | 12 | VDC | Ctrl floating or TTL high | 3 |
| Ctrl low level (module off) | | 0 | | 1.2 | VDC | Ctrl to GND or low level | 3 |
| Output load | | 0 | | 100 | % | load percentage | 3 |
| Output voltage accuracy | | -2 | 1 | 2 | % | +Vo1; typ printed ±1.0% | 3 |
| Line regulation | | -0.5 | 0.2 | 0.5 | % | input voltage range; typ printed ±0.2% | 3 |
| Load regulation | | -1 | 0.5 | 1 | % | 20% ~ 100% rated load, balanced load; typ printed ±0.5% | 3 |
| Startup delay time | | | 1 | | ms | | 3 |
| Dynamic response step deviation | | -5 | 3 | 5 | % | 25% nominal load step; typ printed ±3.0% | 4 |
| Dynamic response recovery time | | | 300 | 500 | μs | 25% nominal load step | 4 |
| Output overvoltage protection | | 110 | | 160 | %Vo | full input voltage range | 4 |
| Output overcurrent protection | | 110 | 150 | 200 | %Io | full input voltage range | 4 |
| Isolation voltage | | 1500 | | | VDC | input-output, test time 1 minute, leakage current less than 1mA | 4 |
| Isolation resistance | | 1000 | | | MΩ | input-output, insulation voltage 500VDC | 4 |
| Isolation capacitance | | | 1000 | | pF | input-output, 100KHz/0.1V | 4 |
| Operating temperature | | -40 | | 85 | °C | see temperature derating curve | 4 |
| Storage temperature | | -40 | | 125 | °C | | 4 |
| Maximum case temperature | | | | 100 | °C | operating | 4 |
| Storage humidity | | 5 | | 95 | %RH | non-condensing | 4 |
| Lead soldering temperature | | | | 300 | °C | solder point 1.5mm from case, 10 seconds | 4 |
| Switching frequency | | | 250 | | KHz | PWM mode | 4 |
## CAD (KiCad official)
- Symbol: `VRB2412LD-20WR3`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `vrb2412ld-20wr3-etched.step` / `vrb2412ld-20wr3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `vrb2412ld-20wr3.step` / `vrb2412ld-20wr3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [YLPTEC datasheet](docs/vrb2412ld-20wr3-datasheet.pdf) (7 pp, sha256 `61c243f0797df2e9`, retrieved 2026-10-26, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/vrb2412ld-20wr3-datasheet.pdf)