Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

VRB2412LD-20WR3

YLPTEC · Isolated Power Modules · DIP-6

VRB2412LD-20WR3 from YLPTEC, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 -Vin power_in Negative input terminal of the 24 Vdc nominal (18~36 Vdc) input range, and the reference for the Ctrl pin voltage.
2 +Vin power_in Positive input terminal for the 24 Vdc nominal (18~36 Vdc) input, with an input surge limit of 50 Vdc max and undervoltage protection at 5.5 V min / 6.5 V typ.
3 +Vo power_out Positive 12 Vdc output, 1667 mA max load, with output overvoltage, overcurrent and continuous self-recovering short-circuit protection.
4 Trim passive Labelled Trim (voltage trim) in the single-output pin table, but the output specification states no adjustment terminal (无调节端).
5 GND power_in Output ground, the return for +Vo.
6 CTRL input Remote on/off: module is on when Ctrl is open or at TTL high (3.5-12 VDC) and off when tied to GND or low (0-1.2 VDC), referenced to input -Vin, with 1 mA typ / 2 mA max input current when off.

Key specifications

Parameter Value
Manufacturer YLPTEC
Package DIP-6
Category Power Modules
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range (24V nominal series) Vin 18 24 36 Vdc 1
Output voltage Vo 12 Vdc nominal 1
Output current Io 0 1667 mA Max./Min. 1
Maximum capacitive load 2200 μF 1
Efficiency at full load 88 90 % Min/Typ, full load 1
Ripple & noise 50 80 mVp-p full load, 20MHz bandwidth, resistive load 1
Input current full load 926 946 mA 24VDC series, 12.0V output, nominal input voltage 2
Input current no load 1.5 2 mA 24VDC series, 12.0V output, nominal input voltage 2
Reflected ripple current 40 mA 24VDC series, nominal input voltage 3
Surge voltage (1sec max) Isec.max -0.7 50 VDC 24VDC series, nominal input voltage 3
Start-up voltage 9 VDC 24VDC series, nominal input voltage 3
Input undervoltage protection 5.5 6.5 VDC 24VDC series, nominal input voltage 3
Start-up time 1 mS nominal input voltage and constant resistive load 3
Input current when shut down 1 2 mA 3
Ctrl high level (module on) 3.5 12 VDC Ctrl floating or TTL high 3
Ctrl low level (module off) 0 1.2 VDC Ctrl to GND or low level 3
Output load 0 100 % load percentage 3
Output voltage accuracy -2 1 2 % +Vo1; typ printed ±1.0% 3
Line regulation -0.5 0.2 0.5 % input voltage range; typ printed ±0.2% 3
Load regulation -1 0.5 1 % 20% ~ 100% rated load, balanced load; typ printed ±0.5% 3
Startup delay time 1 ms 3
Dynamic response step deviation -5 3 5 % 25% nominal load step; typ printed ±3.0% 4
Dynamic response recovery time 300 500 μs 25% nominal load step 4
Output overvoltage protection 110 160 %Vo full input voltage range 4
Output overcurrent protection 110 150 200 %Io full input voltage range 4
Isolation voltage 1500 VDC input-output, test time 1 minute, leakage current less than 1mA 4
Isolation resistance 1000 MΩ input-output, insulation voltage 500VDC 4
Isolation capacitance 1000 pF input-output, 100KHz/0.1V 4
Operating temperature -40 85 °C see temperature derating curve 4
Storage temperature -40 125 °C 4
Maximum case temperature 100 °C operating 4
Storage humidity 5 95 %RH non-condensing 4
Lead soldering temperature 300 °C solder point 1.5mm from case, 10 seconds 4
Switching frequency 250 KHz PWM mode 4

CAD (KiCad official)

  • Symbol: VRB2412LD-20WR3
  • Footprint: Package_DIP:DIP-6_W7.62mm
  • 3D model: DIP-6 (KiCad packages3D, STEP)
  • 3D model files: vrb2412ld-20wr3-etched.step / vrb2412ld-20wr3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vrb2412ld-20wr3.step / vrb2412ld-20wr3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: YLPTEC datasheet (7 pp, sha256 61c243f0797df2e9, retrieved 2026-10-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF