main
Ray
Publish 0.1.1
120361f
(footprint "YLPTEC_VRB2412_2d2373"
(version 20240108)
(generator "adom_assets")
(layer "F.Cu")
(descr "Derived host land (YLPTEC prints pin positions and pin diameter but no hole or pad size. Pin dia. 1.00 (lateral view) with the sheet's unmarked pin-diameter tolerance +/-0.10, so 1.10 max; drill 1.3 (max lead + 0.2) and 2.2 round pads (1.3 + 2 x 0.45 annular ring) are mine. Closest pins are 1 and 2 at 5.08, so 2.88 between pad edges.; family D2d2373, spec 2d237318fa)")
(tags "adom generated")
(attr through_hole)
(property "Reference" "REF**" (at 0 -13.95 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))
(property "Value" "YLPTEC_VRB2412_2d2373" (at 0 13.95 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))
(fp_line (start -25.4 -12.7) (end 25.4 -12.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
(fp_line (start 25.4 -12.7) (end 25.4 12.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
(fp_line (start 25.4 12.7) (end -25.4 12.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
(fp_line (start -25.4 12.7) (end -25.4 -12.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
(fp_line (start -25.65 -12.95) (end 25.65 -12.95) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
(fp_line (start 25.65 -12.95) (end 25.65 12.95) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
(fp_line (start 25.65 12.95) (end -25.65 12.95) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
(fp_line (start -25.65 12.95) (end -25.65 -12.95) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
(fp_line (start -11.66 -3.64) (end -11.66 -1.44) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))
(pad "1" thru_hole rect (at -10.16 -2.54) (size 2.2 2.2) (drill 1.3) (layers "*.Cu" "*.Mask"))
(pad "2" thru_hole circle (at -10.16 2.54) (size 2.2 2.2) (drill 1.3) (layers "*.Cu" "*.Mask"))
(pad "3" thru_hole circle (at 10.16 10.16) (size 2.2 2.2) (drill 1.3) (layers "*.Cu" "*.Mask"))
(pad "4" thru_hole circle (at 10.16 0) (size 2.2 2.2) (drill 1.3) (layers "*.Cu" "*.Mask"))
(pad "5" thru_hole circle (at 10.16 -10.16) (size 2.2 2.2) (drill 1.3) (layers "*.Cu" "*.Mask"))
(pad "6" thru_hole circle (at -10.16 -10.16) (size 2.2 2.2) (drill 1.3) (layers "*.Cu" "*.Mask"))
(model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/YLPTEC_VRB2412_2d2373.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)))
)