main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.1 · Ray
viewers vrb2412ld-15wr3: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.1 · Ray
verification.json Verified: Rebuilt by the parts factory: tier lcsc, 6 pins · Ray
vrb2412ld-15wr3-etched.glb vrb2412ld-15wr3: factory component page (tier=lcsc) · Ray
vrb2412ld-15wr3-etched.step vrb2412ld-15wr3: factory component page (tier=lcsc) · Ray
vrb2412ld-15wr3-hero.glb vrb2412ld-15wr3: hero GLB from the etched model (keeps the MPN mark) · Ray
vrb2412ld-15wr3-hero.overlay.json vrb2412ld-15wr3: hero GLB from the etched model (keeps the MPN mark) · Ray
vrb2412ld-15wr3.glb Publish 0.1.1 · Ray
vrb2412ld-15wr3.kicad_mod Publish 0.1.1 · Ray
vrb2412ld-15wr3.kicad_sym Publish 0.1.1 · Ray
vrb2412ld-15wr3.lbr Publish 0.1.1 · Ray
vrb2412ld-15wr3.step Publish 0.1.1 · Ray

VRB2412LD-15WR3

YLPTEC · Isolated Power Modules · DIP-6

VRB2412LD-15WR3 from YLPTEC, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 -Vin power_in Negative input supply terminal for the 24 VDC input family (18-36 VDC operating range, 50 V 1-second surge maximum, undervoltage turn-off 12-16.5 VDC).
2 +Vin power_in Positive input supply terminal; the 24 VDC input version operates from 18-36 VDC with a start-up voltage of 18 VDC maximum.
3 +Vo power_out Positive regulated output, rated 12 VDC at up to 1250 mA maximum for this variant, with output voltage accuracy of ±1% typical and ±3% maximum at 0-100% load.
4 Trim input Output voltage trim pin, adjustable over 90-110 %Vo with the external resistor network shown in the trim circuit of the datasheet.
5 GND power_in Output ground return, the common reference for +Vo and for the CTRL pin.
6 CTRL input Remote on/off control: left floating or driven high at 3.5-12 VDC turns the module on, while connection to GND or a level of 0-1.2 VDC turns it off (4-7 mA input current when off).

Key specifications

Parameter Value
Manufacturer YLPTEC
Package DIP-6
Category Power Modules
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range Vin 18 24 36 V 1
Output current 0 1250 mA 1
Maximum capacitive load 1000 µF Full load, input voltage range 1
Full load efficiency 87 89 % Full load 1
Input current, full load (24 VDC input, other outputs) 702 718 mA 24 VDC input, other outputs, full load 1
Input current, no load (24 VDC input, other outputs) 5 10 mA 24 VDC input, other outputs, no load 1
Surge voltage (1 s max), 24 VDC input -0.7 50 VDC 1 s max, 24 VDC input 1
Start-up voltage, 24 VDC input 18 VDC 24 VDC input 1
Undervoltage shutdown voltage, 24 VDC input 12 16.5 VDC 24 VDC input 1
Remote control on voltage (CTRL) CTRL 3.5 12 VDC Module on: CTRL floating or TTL high 1
Remote control off voltage (CTRL) CTRL 0 1.2 VDC Module off: CTRL to GND or low level 2
Shutdown input current 4 7 mA Module shut down 2
Output voltage accuracy -3 1 3 0%-100% load 2
Line regulation -0.5 0.2 0.5 % Full load, input voltage low to high 2
Load regulation -1 0.5 1 Nominal input voltage 2
Ripple and noise 50 100 mVp-p 20 MHz bandwidth, 5%-100% load 2
Transient recovery time 300 500 μs 25% load step, nominal input voltage 2
Transient response deviation, other outputs -5 3 5 % 2
Temperature drift coefficient -0.03 0.03 %/℃ 2
Output voltage trim range 90 110 %Vo Input voltage range 2
Overvoltage protection 110 160 2
Overcurrent protection 110 190 %Io 2
Isolation voltage 1500 VDC Input-output, 1 min, leakage current less than 1 mA 2
Insulation resistance 1000 MΩ Input-output, 500 VDC insulation voltage 2
Mean time between failures 1000 K Hours MIL-HDBK-217F @25℃ 2
Operating temperature -40 85 ℃ See Figure 1 2
Storage temperature -55 125 ℃ 2
Storage humidity 5 95 %RH Non-condensing 2
Lead soldering temperature 300 ℃ 1.5 mm from case, 10 s 2

CAD (Adom-generated)

  • Symbol: VRB2412LD-15WR3
  • Footprint: Adom_Gen:YLPTEC_VRB2412_2d2373
  • 3D model: generated to fit the land (STEP)
  • 3D model files: vrb2412ld-15wr3-etched.step / vrb2412ld-15wr3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vrb2412ld-15wr3.step / vrb2412ld-15wr3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: YLPTEC datasheet (5 pp, sha256 0538c58af128bd54, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: YLPTEC prints pin positions and pin diameter but no hole or pad size. Pin dia. 1.00 (lateral view) with the sheet's unmarked pin-diameter tolerance +/-0.10, so 1.10 max; drill 1.3 (max lead + 0.2) and 2.2 round pads (1.3 + 2 x 0.45 annular ring) are mine. Closest pins are 1 and 2 at 5.08, so 2.88 between pad edges.

Datasheet PDF