component
VP3481MSG10-A
Public Made by Adomby adom
VIVA DC-DC Converters, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownVP3481MSG10-A
VIVA · DC-DC Converters · MSOP-10
VP3481MSG10-A from VIVA, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ISEN | input | Current sense input: an external resistor in series with ground sets the current limit, which activates when the voltage between ISEN and ground exceeds 230mV. |
| 2 | UVLO | input | Undervoltage lockout input: an external resistor divider sets the input voltage at which switching is enabled and the hysteresis at which it is disabled, compared against an internal 1.43V reference with a 4.5µA source current. |
| 3 | COMP | input | Error amplifier compensation pin, where an RC or C network is used for loop compensation. |
| 4 | FB | input | Output voltage feedback input from an external resistor divider, regulated to the internal 1.275V reference; overvoltage protection is triggered when FB rises to VFB+VOVP. |
| 5 | AGND | power_in | Analog ground, to be connected to the exposed pad. |
| 6 | FADJ | input | Frequency adjust, clock synchronization and shutdown pin: a resistor to ground sets the oscillator frequency (100kHz to 1MHz), an external clock can synchronize the device, and holding the pin high for 30µs or more shuts the device down. |
| 7 | PVSS | power_in | Power ground, to be connected to the exposed pad. |
| 8 | GATE | output | Gate drive output that connects to the gate of the external N-channel MOSFET. |
| 9 | VREG | power_out | Internal drive supply voltage that requires a bypass capacitor to ground (0.47µF to 4.7µF recommended) and must not be biased with an external power source. |
| 10 | IN | power_in | Power supply input, with a recommended operating supply voltage range of 2.97V to 40V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VIVA |
| Package | MSOP-10 |
| Category | Power Management (PMIC) |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VIN | -0.3 | 42 | V | 3 | ||
| Low voltage range (COMP/UVLO/FB/FADJ/GATE) | VLV | -0.3 | 6 | V | 3 | ||
| Regulator output pin range | VCC(VREG) | -0.3 | 5 | V | 3 | ||
| Current sense pin range | VISEN | -0.4 | 0.6 | V | 3 | ||
| Junction temperature MAX | TJMAX | 150 | oC | 3 | |||
| Storage temperature range | TSTG | -65 | 150 | oC | 3 | ||
| Electrostatic discharge, Human body model | 2 | kV | Human body model | 3 | |||
| Electrostatic discharge, Machine model | 200 | V | Machine model | 3 | |||
| Supply voltage | VIN | 2.97 | 40 | V | 3 | ||
| Switching frequency range | fOSC | 0.1 | 1 | MHz | 3 | ||
| Operating junction range | TJ | -40 | 125 | oC | 3 | ||
| Feedback voltage | VFB | 1.236 | 1.313 | V | VCOMP=1.4V, 3V<VIN<40V, -40℃<TJ<125℃ | 4 | |
| Under voltage lockout, ramp down | VUVLO | 1.345 | 1.517 | V | Ramp down | 4 | |
| UVLO shutdown voltage | VUVLOSD | 0.55 | 0.7 | 0.82 | V | 4 | |
| Current sense threshold voltage | VSENSE | 120 | 200 | mV | VIN=12V, -40℃<TJ<125℃ | 4 | |
| Overload current limit sense voltage | VSC | 160 | 350 | mV | VIN=12V, -40℃<TJ<125℃ | 4 | |
| Output overvoltage protection | VOVP | 26 | 85 | 135 | mV | VCOMP=1.4V | 5 |
| Output overvoltage protection hysteresis | VOVP(HYS) | 28 | 70 | 106 | mV | VCOMP=1.4V | 5 |
| Error amplifier output current, source | IEAO | 470 | 950 | μA | Source, VCOMP = 1.4V, VFB = 0V, -40℃<TJ<125℃ | 5 | |
| Error amplifier output current, sink | IEAO | 30 | 105 | μA | Sink, VCOMP = 1.4V, VFB = 1.4V, -40℃<TJ<125℃ | 5 | |
| Error amplifier output voltage, upper limit | VEAO | 2.4 | 2.95 | V | Upper Limit: VFB=0V, COMP pin floating, -40℃<TJ<125℃ | 5 | |
| Error amplifier output voltage, lower limit | VEAO | 0.32 | 0.9 | V | Lower Limit: VFB=1.4V, -40℃<TJ<125℃ | 5 | |
| Soft start delay | tSS | 8.7 | 15 | 21.3 | mS | VFB = 1.2V, COMP pin floating | 5 |
| Oscillation frequency | fOSC | 0.125 | 0.2 | MHz | RFADJ=150kΩ, -40℃<TJ<125℃ | 4 | |
| Voltage load regulation | ΔVLOAD | -0.5 | 0.5 | %/A | IEAO Source/Sink | 4 | |
| Feedback voltage | VFB | 1.275 | V | VCOMP=1.4V, 3V<VIN<40V | 4 | ||
| Quiescent current in shutdown mode | IQ | 10 | μA | VFADJ=3V, VIN=12V | 4 | ||
| Quiescent current in shutdown mode | IQ | 15 | μA | VIN=12V, -40℃<TJ<125℃ | 4 | ||
| Quiescent current in shutdown mode | IQ | 5 | μA | VFADJ=3V, VIN=5V | 4 | ||
| Supply current | ISUPPLY | 3.3 | mA | RFADJ=150kΩ | 4 | ||
| High-side switch RDS(ON) | RDS(ON) | 4 | Ω | VIN=5V, IGATE=0.2A | 4 | ||
| Low-side switch RDS(ON) | RDS(ON) | 2 | Ω | VIN=5V, IGATE=0.2A | 4 | ||
| Error amplifier voltage gain | AVOL | 60 | V/V | VCOMP=1.4V, IEAO=100μA | 4 | ||
| Maximum GATE driving swing | VGATE | 5.2 | V | VIN≥5.8V | 4 | ||
| Oscillation frequency | fOSC | 0.146 | MHz | RFADJ=150kΩ | 4 | ||
| Maximum duty cycle | DMAX | 85 | % | RFADJ=150kΩ | 4 | ||
| Minimum on-time | tMIN(ON) | 571 | nS | 4 | |||
| Current sense threshold voltage | VSENSE | 160 | mV | VIN=12V | 4 | ||
| Overload current limit sense voltage | VSC | 200 | mV | VIN=12V | 4 | ||
| Error amplifier output current, source | IEAO | 650 | μA | Source, VCOMP = 1.4V, VFB = 0V | 5 | ||
| Error amplifier output current, sink | IEAO | 57 | μA | Sink, VCOMP = 1.4V, VFB = 1.4V | 5 | ||
| Error amplifier output voltage, upper limit | VEAO | 2.65 | V | Upper Limit: VFB=0V, COMP pin floating | 5 | ||
| Error amplifier output voltage, lower limit | VEAO | 0.65 | V | Lower Limit: VFB=1.4V | 5 | ||
| Shutdown signal threshold on FADJ pin, High Level (SD) | VSD | 1.26 | V | Output=High Level (SD) | 5 | ||
| Shutdown signal threshold on FADJ pin, High Level (SD) | VSD | 1.4 | V | Output=High Level (SD), -40℃<TJ<125℃ | 5 | ||
| Shutdown signal threshold on FADJ pin, Low Level (EN) | VSD | 0.63 | V | Output=Low Level (EN) | 5 | ||
| Shutdown signal threshold on FADJ pin, Low Level (EN) | VSD | 0.4 | V | Output=Low Level (EN), -40℃<TJ<125℃ | 5 | ||
| GATE pin rising time | tR | 18 | nS | Cgs = 3000pF, VGATE = 0V to 3V | 5 | ||
| GATE pin falling time | tF | 12 | nS | Cgs = 3000pF, VGATE = 3V to 0V | 5 | ||
| Shutdown pin current | ISD | 10 | μA | FADJ pin VSD=0V | 5 | ||
| Thermal shutdown | TSD | 175 | ℃ | 5 | |||
| Thermal resistance, junction to case (top) | θJC(top) | 46 | oC/W | MSOP package column | 3 | ||
| Thermal resistance, junction to air | θJA | 147 | oC/W | MSOP package column | 3 | ||
| Thermal resistance, junction to board | θJB | 81 | oC/W | MSOP package column | 3 | ||
| Junction-to-top characterization parameter | ψJT | 3 | oC/W | MSOP package column | 3 | ||
| Junction-to-board characterization parameter | ψJB | 77 | oC/W | MSOP package column | 3 |
CAD (KiCad official)
- Symbol:
VP3481MSG10-A - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
vp3481msg10-a-etched.step/vp3481msg10-a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vp3481msg10-a.step/vp3481msg10-a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: VIVA datasheet (19 pp, sha256
3ef87c4438cd76a5, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).