Generated by adom_assets · KiCad file format 20240108
VL53L1CXV0FY
STMicroelectronics · Position Sensors · LGA-12(2.5x4.9)
VL53L1CXV0FY from STMicroelectronics, in a LGA-12(2.5x4.9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDDVCSEL | power_in | VCSEL supply, to be connected to main supply. |
| 2 | AVSSVCSEL | power_in | VCSEL ground, to be connected to main ground; may be tied together with GND in the application. |
| 3 | GND | power_in | Ground, to be connected to main ground. |
| 4 | GND2 | power_in | Standard ground pin forced to the ground domain in the application schematic to avoid possible instabilities if left in other states. |
| 5 | XSHUT | input | Xshutdown pin, active low; must always be driven to avoid leakage current and is needed for HW standby mode. |
| 6 | GND3 | power_in | Standard ground pin forced to the ground domain in the application schematic to avoid possible instabilities if left in other states. |
| 7 | GPIO1 | output | Interrupt output; open drain output, typically pulled up with 10 kOhm and left unconnected if not used. |
| 8 | DNC | unconnected | Do not connect; must be left floating. |
| 9 | SDA | bidirectional | I2C serial data. |
| 10 | SCL | input | I2C serial clock input. |
| 11 | AVDD | power_in | Supply, to be connected to main supply; operating voltage 2.6 to 3.5 V. |
| 12 | GND4 | power_in | Ground, to be connected to main ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LGA-12(2.5x4.9) |
| Category | Sensors |
| Pins | 12 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage AVDD absolute maximum | AVDD | -0.5 | 3.6 | V | 23 | ||
| SCL, SDA, XSHUT and GPIO1 voltage absolute maximum | -0.5 | 3.6 | V | 23 | |||
| Voltage (AVDD) recommended operating | AVDD | 2.6 | 2.8 | 3.5 | V | 23 | |
| IO (IOVDD) recommended operating, standard mode | IOVDD | 1.6 | 1.8 | 1.9 | V | Standard mode | 23 |
| IO (IOVDD) recommended operating, 2V8 mode | IOVDD | 2.6 | 2.8 | 3.5 | V | 2V8 mode | 23 |
| Ambient temperature (normal operating) | -20 | 85 | °C | 23 | |||
| Temperature (storage) | -40 | 23 | 85 | °C | 32 | ||
| Human body model ESD | -2 | 2 | kV | JS-001-2012, 1500 Ohms, 100 pF | 23 | ||
| Charged device model ESD | -500 | 500 | V | JESD22-C101 | 23 | ||
| HW standby current | 3 | 5 | 7 | uA | 24 | ||
| Interrupt pin (GPIO1) low level input voltage | VIL | 0.3 | V | 24 | |||
| Interrupt pin (GPIO1) high level input voltage | VIH | 0.7 | V | 24 | |||
| Interrupt pin (GPIO1) low level output voltage | VOL | 0.4 | V | IOUT = 4 mA | 24 | ||
| Interrupt pin (GPIO1) operating frequency | FGPIO | 0 | 108 | MHz | CLOAD = 20 pF | 24 | |
| I2C interface (SDA/SCL) low level input voltage | VIL | -0.5 | 0.6 | V | 24 | ||
| I2C interface (SDA/SCL) low level output voltage | VOL | 0.4 | V | IOUT = 4 mA | 24 | ||
| I2C interface leakage current (AVDD = 0 V) | IIL/IH | 10 | µA | AVDD = 0 V | 24 | ||
| I2C interface leakage current | IIL/IH | 0.15 | µA | AVDD = 2.85 V; I/O voltage = 1.8 V | 24 | ||
| Operating frequency (I2C) | FI2C | 0 | 400 | kHz | Fast mode (400 kHz) | 21 | |
| Clock pulse width low | tLOW | 1.3 | μs | Fast mode (400 kHz) | 21 | ||
| Clock pulse width high | tHIGH | 0.6 | μs | Fast mode (400 kHz) | 21 | ||
| Pulse width of spikes suppressed by input filter | tSP | 50 | ns | Fast mode (400 kHz) | 21 | ||
| Bus free time between transmissions | tBUF | 1.3 | ms | Fast mode (400 kHz) | 21 | ||
| Start hold time | tHD.STA | 0.26 | μs | Fast mode (400 kHz) | 21 | ||
| Start set-up time | tSU.STA | 0.26 | μs | Fast mode (400 kHz) | 21 | ||
| SCL/SDA rise time | tR | 120 | ns | Fast mode (400 kHz) | 21 | ||
| SCL/SDA fall time | tF | 120 | ns | Fast mode (400 kHz) | 21 | ||
| Stop set-up time | tSU.STO | 0.6 | μs | Fast mode (400 kHz) | 21 | ||
| Input capacitance (SCL) | Cin | 4 | pF | Fast mode (400 kHz) | 21 |
CAD (KiCad official)
- Symbol:
VL53L1CXV0FY - Footprint:
Adom_Gen:STMicroelectronics_VL53_b48acb - 3D model: LGA-12(2.5x4.9) (KiCad packages3D, STEP)
- 3D model files:
vl53l1cxv0fy-1-etched.step/vl53l1cxv0fy-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vl53l1cxv0fy-1.step/vl53l1cxv0fy-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (35 pp, sha256
9b8aa178415b4142, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).