Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

VL53L1CXV0FY

STMicroelectronics · Position Sensors · LGA-12(2.5x4.9)

VL53L1CXV0FY from STMicroelectronics, in a LGA-12(2.5x4.9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVDDVCSEL power_in VCSEL supply, to be connected to main supply.
2 AVSSVCSEL power_in VCSEL ground, to be connected to main ground; may be tied together with GND in the application.
3 GND power_in Ground, to be connected to main ground.
4 GND2 power_in Standard ground pin forced to the ground domain in the application schematic to avoid possible instabilities if left in other states.
5 XSHUT input Xshutdown pin, active low; must always be driven to avoid leakage current and is needed for HW standby mode.
6 GND3 power_in Standard ground pin forced to the ground domain in the application schematic to avoid possible instabilities if left in other states.
7 GPIO1 output Interrupt output; open drain output, typically pulled up with 10 kOhm and left unconnected if not used.
8 DNC unconnected Do not connect; must be left floating.
9 SDA bidirectional I2C serial data.
10 SCL input I2C serial clock input.
11 AVDD power_in Supply, to be connected to main supply; operating voltage 2.6 to 3.5 V.
12 GND4 power_in Ground, to be connected to main ground.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LGA-12(2.5x4.9)
Category Sensors
Pins 12

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage AVDD absolute maximum AVDD -0.5 3.6 V 23
SCL, SDA, XSHUT and GPIO1 voltage absolute maximum -0.5 3.6 V 23
Voltage (AVDD) recommended operating AVDD 2.6 2.8 3.5 V 23
IO (IOVDD) recommended operating, standard mode IOVDD 1.6 1.8 1.9 V Standard mode 23
IO (IOVDD) recommended operating, 2V8 mode IOVDD 2.6 2.8 3.5 V 2V8 mode 23
Ambient temperature (normal operating) -20 85 °C 23
Temperature (storage) -40 23 85 °C 32
Human body model ESD -2 2 kV JS-001-2012, 1500 Ohms, 100 pF 23
Charged device model ESD -500 500 V JESD22-C101 23
HW standby current 3 5 7 uA 24
Interrupt pin (GPIO1) low level input voltage VIL 0.3 V 24
Interrupt pin (GPIO1) high level input voltage VIH 0.7 V 24
Interrupt pin (GPIO1) low level output voltage VOL 0.4 V IOUT = 4 mA 24
Interrupt pin (GPIO1) operating frequency FGPIO 0 108 MHz CLOAD = 20 pF 24
I2C interface (SDA/SCL) low level input voltage VIL -0.5 0.6 V 24
I2C interface (SDA/SCL) low level output voltage VOL 0.4 V IOUT = 4 mA 24
I2C interface leakage current (AVDD = 0 V) IIL/IH 10 µA AVDD = 0 V 24
I2C interface leakage current IIL/IH 0.15 µA AVDD = 2.85 V; I/O voltage = 1.8 V 24
Operating frequency (I2C) FI2C 0 400 kHz Fast mode (400 kHz) 21
Clock pulse width low tLOW 1.3 μs Fast mode (400 kHz) 21
Clock pulse width high tHIGH 0.6 μs Fast mode (400 kHz) 21
Pulse width of spikes suppressed by input filter tSP 50 ns Fast mode (400 kHz) 21
Bus free time between transmissions tBUF 1.3 ms Fast mode (400 kHz) 21
Start hold time tHD.STA 0.26 μs Fast mode (400 kHz) 21
Start set-up time tSU.STA 0.26 μs Fast mode (400 kHz) 21
SCL/SDA rise time tR 120 ns Fast mode (400 kHz) 21
SCL/SDA fall time tF 120 ns Fast mode (400 kHz) 21
Stop set-up time tSU.STO 0.6 μs Fast mode (400 kHz) 21
Input capacitance (SCL) Cin 4 pF Fast mode (400 kHz) 21

CAD (KiCad official)

  • Symbol: VL53L1CXV0FY
  • Footprint: Adom_Gen:STMicroelectronics_VL53_b48acb
  • 3D model: LGA-12(2.5x4.9) (KiCad packages3D, STEP)
  • 3D model files: vl53l1cxv0fy-1-etched.step / vl53l1cxv0fy-1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); vl53l1cxv0fy-1.step / vl53l1cxv0fy-1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (35 pp, sha256 9b8aa178415b4142, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF