VIPER319HDTR

{
  "slug": "viper319hdtr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics AC-DC Controllers And Regulators, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "viper319hdtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "viper319hdtr.kicad_sym",
    "viper319hdtr.kicad_mod",
    "viper319hdtr.glb",
    "viper319hdtr.step",
    "viper319hdtr.lbr",
    "docs/hero.png",
    "docs/viper319hdtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "viper319hdtr-hero.glb",
    "viper319hdtr-hero.overlay.json"
  ],
  "component": {
    "mpn": "VIPER319HDTR",
    "manufacturer": "STMicroelectronics",
    "package": "SO-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602901683886710784",
    "parts": {
      "symbol": "viper319hdtr.kicad_sym",
      "footprint": "viper319hdtr.kicad_mod",
      "model_3d": "viper319hdtr-hero.glb",
      "model_3d_plain": "viper319hdtr.glb",
      "model_3d_step": "viper319hdtr-etched.step",
      "model_3d_step_plain": "viper319hdtr.step",
      "lbr": "viper319hdtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C3093916",
      "digikey": "497-VIPER319HDTR-ND",
      "mouser": "511-VIPER319HDTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T18:39:33Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-VIPER319HDTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-VIPER319HDTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground and MOSFET source; the return of the internal MOSFET source and the bias current, and all bias-component grounds must run to this pin, kept separate from the pulsed current return."
      },
      {
        "number": "2",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Not connected; when designing the PCB this pin can be soldered to GND."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Controller supply; an external storage capacitor is required across VCC and GND, and a small 0.1 µF typ. bypass capacitor should be placed as close as possible to the IC."
      },
      {
        "number": "4",
        "name": "N.A.",
        "type": "unconnected",
        "description": "Not available for user; mechanically connected to the controller die pad, and it is highly recommended to connect it to GND for noise immunity."
      },
      {
        "number": "5",
        "name": "UVP",
        "type": "input",
        "description": "Undervoltage protection: the IC is disabled when VUVP falls below VUVP_th (0.4 V typ.) for more than 30 ms typ., and resumes switching 30 ms typ. after VUVP rises above the threshold; leave open if the feature is not used."
      },
      {
        "number": "6",
        "name": "OVP",
        "type": "input",
        "description": "Overvoltage protection: the PWM is disabled in auto-restart for 500 ms typ. when VOVP exceeds 4 V typ. for more than 250 µs typ.; connect to GND if the feature is not required."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "Direct feedback and inverting input of the internal transconductance E/A, internally referenced to 1.2 V with respect to GND; the E/A is disabled if FB is connected to GND."
      },
      {
        "number": "8",
        "name": "COMP",
        "type": "output",
        "description": "Output of the internal E/A; a compensation network between COMP and GND is required for loop stability, and in secondary feedback COMP is driven directly by the optocoupler."
      },
      {
        "number": "9",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Not connected; must be left floating to obtain a safe clearance distance."
      },
      {
        "number": "10",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Not connected; must be left floating to obtain a safe clearance distance."
      },
      {
        "number": "11",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Not connected; must be left floating to obtain a safe clearance distance."
      },
      {
        "number": "12",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Not connected; must be left floating to obtain a safe clearance distance."
      },
      {
        "number": "13",
        "name": "DRAIN",
        "type": "passive",
        "description": "MOSFET drain; the internal high-voltage current source draws from these pins to charge the VCC capacitor at startup, and they are mechanically tied to the MOSFET metal pad for heat dissipation."
      },
      {
        "number": "14",
        "name": "DRAIN",
        "type": "passive",
        "description": "MOSFET drain; the internal high-voltage current source draws from these pins to charge the VCC capacitor at startup, and they are mechanically tied to the MOSFET metal pad for heat dissipation."
      },
      {
        "number": "15",
        "name": "DRAIN",
        "type": "passive",
        "description": "MOSFET drain; the internal high-voltage current source draws from these pins to charge the VCC capacitor at startup, and they are mechanically tied to the MOSFET metal pad for heat dissipation."
      },
      {
        "number": "16",
        "name": "DRAIN",
        "type": "passive",
        "description": "MOSFET drain; the internal high-voltage current source draws from these pins to charge the VCC capacitor at startup, and they are mechanically tied to the MOSFET metal pad for heat dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN VIPER319HDTR could not be tied to the SO16N package from the supplied pages. The order code ; The pinout comes from Table 1 (pin descriptions) because the connection diagram in Figure 1 is text-; Pin types are inferred, not stated by the datasheet: pin 4 (N.A.) is typed unconnected, though it is",
          "2/16 pins cited to the wrong page (name found elsewhere): ['11:N.C.@p3', '14:DRAIN@p3']"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0413,
        "at": "2026-10-11T18:39:16"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602901683886710784",
        "pages": 40,
        "sha256": "200c56a12395fdf1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "viper319hdtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "viper319hdtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f5a46ad8071fef738058fe5b8c1fd243a4362e7c0838860fd6e2c019cd890032",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}