main
Ray Publish 0.1.0 0ffbe57
{
  "slug": "viper26hn",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics AC-DC Controllers & Regulators, PDIP-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "viper26hn",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "viper26hn.kicad_sym",
    "viper26hn.kicad_mod",
    "viper26hn.glb",
    "viper26hn.step",
    "viper26hn.lbr",
    "docs/hero.png",
    "docs/viper26hn-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "viper26hn-hero.glb",
    "viper26hn-hero.overlay.json"
  ],
  "component": {
    "mpn": "VIPER26HN",
    "manufacturer": "STMicroelectronics",
    "package": "PDIP-7",
    "pin_count": 7,
    "category": "Power Management ICs",
    "subcategory": "AC-DC Controllers & Regulators",
    "datasheet": "https://www.st.com/resource/en/datasheet/viper26hn.pdf",
    "parts": {
      "symbol": "viper26hn.kicad_sym",
      "footprint": "viper26hn.kicad_mod",
      "model_3d": "viper26hn-hero.glb",
      "model_3d_plain": "viper26hn.glb",
      "model_3d_step": "viper26hn-etched.step",
      "model_3d_step_plain": "viper26hn.step",
      "lbr": "viper26hn.lbr"
    },
    "distributor_links": {
      "lcsc": "C472604",
      "digikey": "497-10743-5-ND",
      "mouser": "511-VIPER26HN"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T05:49:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-10743-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-VIPER26HN",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Connected to the source of the internal power MOSFET and the controller ground reference."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage of the control section, and this pin provides the charging current of the external capacitor."
      },
      {
        "number": "3",
        "name": "LIM",
        "type": "passive",
        "description": "Sets the drain current limitation; the limit can be reduced by connecting an external resistor between this pin and GND, and the pin is left open when the default drain current limitation is used."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the internal transconductance error amplifier; a single resistor from the converter output gives an output voltage equal to VFB_REF, and an external resistor divider is required for higher output voltages."
      },
      {
        "number": "5",
        "name": "COMP",
        "type": "passive",
        "description": "Output of the internal transconductance error amplifier that needs a compensation network to GND for stability, also used to directly control the PWM with an optocoupler, with a linear voltage range from VCOMPL to VCOMPH."
      },
      {
        "number": "7",
        "name": "DRAIN",
        "type": "passive",
        "description": "High voltage drain pin of the power MOSFET, from which the built-in high voltage switched start-up bias current is also drawn; the pin is connected to the metal frame to facilitate heat dissipation."
      },
      {
        "number": "8",
        "name": "DRAIN",
        "type": "passive",
        "description": "High voltage drain pin of the power MOSFET, from which the built-in high voltage switched start-up bias current is also drawn; the pin is connected to the metal frame to facilitate heat dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's DIP-7 pin table (page 4, Table 3) lists pins 1, 2, 3, 4, 5, 7 and 8 only. Pin 6 is n; Package assignment is inferred, not stated in a table row for VIPER26HN. Table 1 lists the order cod; Pin types are KiCad ERC classes chosen from the function descriptions, not stated by the datasheet. "
        ],
        "pages_sent": 25,
        "cost_usd": 0.0966,
        "at": "2026-11-13T05:49:10"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/viper26hn.pdf",
        "pages": 25,
        "sha256": "a20d2b254ca34dac",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "viper26hn.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          10.16,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "f90bd1fa5f010bc999f2dd88ca613ee145644353e91e90fc2564259080330cbf",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "viper26hn-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          10.16,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "eec2d89ae415957cce20b6a4b0fe3736a0da6e6526dbb2d77896a71173198ad4",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DIP-7",
      "source_page": 20,
      "D": {
        "nom_mm": 9.27,
        "range_mm": [
          9.02,
          10.16
        ]
      },
      "E1": {
        "nom_mm": 6.35,
        "range_mm": [
          6.1,
          7.11
        ]
      },
      "E": {
        "nom_mm": 7.87,
        "range_mm": [
          7.62,
          8.26
        ]
      },
      "e": {
        "nom_mm": 2.54,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 5.33,
        "range_mm": [
          null,
          5.33
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "viper26hn.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}