Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
VIPER26HN
STMicroelectronics · AC-DC Controllers & Regulators · PDIP-7
VIPER26HN from STMicroelectronics, in a PDIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Connected to the source of the internal power MOSFET and the controller ground reference. |
| 2 | VDD | power_in | Supply voltage of the control section, and this pin provides the charging current of the external capacitor. |
| 3 | LIM | passive | Sets the drain current limitation; the limit can be reduced by connecting an external resistor between this pin and GND, and the pin is left open when the default drain current limitation is used. |
| 4 | FB | input | Inverting input of the internal transconductance error amplifier; a single resistor from the converter output gives an output voltage equal to VFB_REF, and an external resistor divider is required for higher output voltages. |
| 5 | COMP | passive | Output of the internal transconductance error amplifier that needs a compensation network to GND for stability, also used to directly control the PWM with an optocoupler, with a linear voltage range from VCOMPL to VCOMPH. |
| 7 | DRAIN | passive | High voltage drain pin of the power MOSFET, from which the built-in high voltage switched start-up bias current is also drawn; the pin is connected to the metal frame to help heat dissipation. |
| 8 | DRAIN | passive | High voltage drain pin of the power MOSFET, from which the built-in high voltage switched start-up bias current is also drawn; the pin is connected to the metal frame to help heat dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | PDIP-7 |
| Category | Power Management ICs |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Drain-to-source (ground) voltage | VDRAIN | 800 | V | 5 | |||
| Repetitive avalanche energy (limited by TJ = 150 °C) | EAV | 5 | mJ | limited by TJ = 150 °C | 5 | ||
| Repetitive avalanche current (limited by TJ = 150 °C) | IAR | 1.5 | A | limited by TJ = 150 °C | 5 | ||
| Pulse drain current (limited by TJ = 150 °C) | IDRAIN | 3 | A | limited by TJ = 150 °C | 5 | ||
| Input pin voltage (COMP) | VCOMP | -0.3 | 3.5 | V | 5 | ||
| Input pin voltage (FB) | VFB | -0.3 | 4.8 | V | 5 | ||
| Input pin voltage (LIM) | VLIM | -0.3 | 2.4 | V | 5 | ||
| Input current (VDD) | IDD | 20 | mA | 5 | |||
| Power dissipation (DIP-7) | PTOT | 1 | W | TA < 40 °C (DIP-7) | 5 | ||
| Operating junction temperature range | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Thermal resistance junction pin (DIP-7) | RthJP | 35 | °C/W | Dissipated power = 1 W | 5 | ||
| Thermal resistance junction ambient (DIP-7) | RthJA | 100 | °C/W | Dissipated power = 1 W | 5 | ||
| Thermal resistance junction ambient, on standard single-side FR4 with 100 mm² Cu (DIP-7) | RthJA | 80 | °C/W | Dissipated power = 1 W, standard single side FR4 board, 100 mm² Cu (35 µm) | 5 | ||
| Break-down voltage | VBVDSS | 800 | V | IDRAIN = 1 mA, VCOMP = GND, TJ = 25 °C | 6 | ||
| Drain-source start voltage | VDRAIN_START | 60 | 80 | 100 | V | 6 | |
| VDD start up threshold | VDDon | 12 | 13 | 14 | V | 6 | |
| VDD on internal high voltage current generator threshold | VDDCSon | 9.5 | 10.5 | 11.5 | V | 6 | |
| VDD under voltage shutdown threshold | VDDoff | 7 | 8 | 9 | V | 6 | |
| FB reference voltage | VREF_FB | 3.2 | 3.3 | 3.4 | V | 7 | |
| Burst mode threshold | VCOMPL | 1 | 1.1 | 1.2 | V | TJ = 25 °C | 7 |
| Drain current limitation | IDlim | 0.66 | 0.7 | 0.74 | A | ILIM = -10 µA, VCOMP = 3.3 V, TJ = 25 °C | 7 |
| Switching frequency (VIPER26H, 115 kHz type) | FOSC | 103 | 115 | 127 | kHz | 7 | |
| Modulation depth (VIPER26H, 115 kHz type) | FD | -8 | 8 | kHz | FOSC = 115 kHz | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Note: The copper area for heat dissipation has to be designed under the DRAIN pins. | 4 |
CAD (KiCad official)
- Symbol:
VIPER26HN - Footprint:
Package_DIP:DIP-8-N6_W7.62mm - 3D model: PDIP-7 (KiCad packages3D, STEP)
- 3D model files:
viper26hn-etched.step/viper26hn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);viper26hn.step/viper26hn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (25 pp, sha256
a20d2b254ca34dac, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).