main
History Download
Ray Publish 0.1.0 4795ebb

USB5742B-I

Microchip Technology · Communication Interface Chip/UART/485/232 · VQFN-56(7x7)

USB5742B-I from Microchip Technology, in a VQFN-56(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 USB2DN_DP1/PRT_DIS_P1 bidirectional USB 2.0 downstream port 1 data plus (D+), also the PRT_DIS_P1 port-disable strap that must be tied to 3.3 V with PRT_DIS_M1 to disable port 1.
2 USB2DN_DM1/PRT_DIS_M1 bidirectional USB 2.0 downstream port 1 data minus (D-), also the PRT_DIS_M1 port-disable strap that must be tied to 3.3 V with PRT_DIS_P1 to disable port 1.
3 USB3DN_TXDP1 bidirectional USB 3.2 Gen 1 downstream port 1 SuperSpeed transmit data plus; leave floating if unused.
4 USB3DN_TXDM1 bidirectional USB 3.2 Gen 1 downstream port 1 SuperSpeed transmit data minus; leave floating if unused.
5 VDD12 power_in +1.2 V core power supply pin.
6 USB3DN_RXDP1 bidirectional USB 3.2 Gen 1 downstream port 1 SuperSpeed receive data plus; leave floating if unused.
7 USB3DN_RXDM1 bidirectional USB 3.2 Gen 1 downstream port 1 SuperSpeed receive data minus; leave floating if unused.
8 USB2DN_DP2/PRT_DIS_P2 bidirectional USB 2.0 downstream port 2 data plus (D+), also the PRT_DIS_P2 port-disable strap that must be tied to 3.3 V with PRT_DIS_M2 to disable port 2.
9 USB2DN_DM2/PRT_DIS_M2 bidirectional USB 2.0 downstream port 2 data minus (D-), also the PRT_DIS_M2 port-disable strap that must be tied to 3.3 V with PRT_DIS_P2 to disable port 2.
10 USB3DN_TXDP2 bidirectional USB 3.2 Gen 1 downstream port 2 SuperSpeed transmit data plus; leave floating if unused.
11 USB3DN_TXDM2 bidirectional USB 3.2 Gen 1 downstream port 2 SuperSpeed transmit data minus; leave floating if unused.
12 VDD12 power_in +1.2 V core power supply pin.
13 USB3DN_RXDP2 bidirectional USB 3.2 Gen 1 downstream port 2 SuperSpeed receive data plus; leave floating if unused.
14 USB3DN_RXDM2 bidirectional USB 3.2 Gen 1 downstream port 2 SuperSpeed receive data minus; leave floating if unused.
15 VDD12 power_in +1.2 V core power supply pin.
16 VDD33 power_in +3.3 V power supply and internal regulator input.
17 NC unconnected No connect; must be left unconnected for proper operation.
18 NC unconnected No connect; must be left unconnected for proper operation.
19 NC unconnected No connect; must be left unconnected for proper operation.
20 NC unconnected No connect; must be left unconnected for proper operation.
21 VDD12 power_in +1.2 V core power supply pin.
22 NC unconnected No connect; must be left unconnected for proper operation.
23 NC unconnected No connect; must be left unconnected for proper operation.
24 NC unconnected No connect; must be left unconnected for proper operation.
25 NC unconnected No connect; must be left unconnected for proper operation.
26 NC unconnected No connect; must be left unconnected for proper operation.
27 NC unconnected No connect; must be left unconnected for proper operation.
28 VDD12 power_in +1.2 V core power supply pin.
29 NC unconnected No connect; must be left unconnected for proper operation.
30 NC unconnected No connect; must be left unconnected for proper operation.
31 VDD33 power_in +3.3 V power supply and internal regulator input.
32 GPIO20/GANG_PWR bidirectional General purpose I/O 20 (6 mA buffer); when pulled high it enables gang mode and serves as the gang power pin.
33 VDD12 power_in +1.2 V core power supply pin.
34 GPIO19 bidirectional General purpose input/output 19 (6 mA buffer).
35 PRT_CTL2 bidirectional Port 2 power enable output (active high) and overcurrent sense input from an external current monitor; leave floating if unused.
36 PRT_CTL1 bidirectional Port 1 power enable output (active high) and overcurrent sense input from an external current monitor; leave floating if unused.
37 VBUS_DET input Detects the state of the upstream bus power; must be fed through a resistor divider (50 k by 100 k) to provide 3.3 V on detachable hubs.
38 SPI_CLK/SMCLK bidirectional SPI clock output to the serial ROM in SPI mode, or open-drain SMBus clock (12 mA sink) in SMBus slave mode; also strap SPI_CLK pin for SMBus selection with a 10 kΩ pull-up.
39 SPI_DO/SMDAT bidirectional SPI data output in SPI mode, or SMBus data pin in SMBus slave mode; a 10 kΩ pull-up on this pin selects SMBus slave mode.
40 SPI_DI/CFG_BC_EN input SPI data input in SPI mode, or battery charging configuration strap (CFG_BC_EN) in SMBus slave mode.
41 SPI_CE_N/CFG_NON_REM bidirectional Active low SPI chip enable output in SPI mode, or non-removable port configuration strap (CFG_NON_REM) in SMBus slave mode.
42 RESET_N input Active low reset input that places the device into Reset (Standby) Mode when asserted.
43 VDD12 power_in +1.2 V core power supply pin.
44 VDD33 power_in +3.3 V power supply and internal regulator input.
45 USB2UP_DP bidirectional USB 2.0 upstream data plus (D+).
46 USB2UP_DM bidirectional USB 2.0 upstream data minus (D-).
47 USB3UP_TXDP bidirectional USB 3.2 Gen 1 upstream SuperSpeed transmit data plus.
48 USB3UP_TXDM bidirectional USB 3.2 Gen 1 upstream SuperSpeed transmit data minus.
49 VDD12 power_in +1.2 V core power supply pin.
50 USB3UP_RXDP bidirectional USB 3.2 Gen 1 upstream SuperSpeed receive data plus.
51 USB3UP_RXDM bidirectional USB 3.2 Gen 1 upstream SuperSpeed receive data minus.
52 ATEST passive Analog test pin for test purposes that must always be connected to ground.
53 XTALO output External 25 MHz crystal output; left unconnected when an external clock oscillator drives XTALI/CLK_IN.
54 XTALI/CLK_IN input External 25 MHz crystal input, or external single-ended reference clock input.
55 VDD33 power_in +3.3 V power supply and internal regulator input.
56 RBIAS passive A 12.0 kΩ (+/- 1%) resistor is attached from ground to this pin to set the transceiver's internal bias settings.
57 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Technology
Package VQFN-56(7x7)
Category Communication Interface Chip/UART/485/232
Pins 57

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
+3.3 V Supply Voltage (VDD33) operating VDD33 3 3.6 V 31
+1.2 V Supply Voltage (VDD12) operating VDD12 1.08 1.32 V 31
Input Signal Pins Voltage -0.3 3.6 V 31
XTALI/CLK_IN Voltage -0.3 3.6 V 31
USB 2.0 DP/DM Signal Pins Voltage -0.3 5.5 V 31
USB 3.2 Gen 1 USB3UP_xxxx and USB3DN_xxxx Signal Pins Voltage -0.3 1.32 V 31
Ambient Operating Temperature in Still Air (TA) TA -40 85 °C Industrial version (-I), still air, per Note 3 31
+1.2 V Supply Voltage Rise Time (TRT) TRT 5 ms 31
+3.3 V Supply Voltage Rise Time (TRT) TRT 5 ms 31
+1.2 V Supply Voltage (VDD12) absolute maximum VDD12 -0.5 1.32 V Note 1 31
+3.3 V Supply Voltage (VDD33) absolute maximum VDD33 -0.5 4.6 V Note 1 31
Positive voltage on input signal pins 4.6 V with respect to ground (Note 2) 31
Negative voltage on input signal pins -0.5 V with respect to ground 31
Positive voltage on XTALI/CLK_IN 3.63 V with respect to ground 31
Positive voltage on USB DP/DM signal pins 6 V with respect to ground 31
Positive voltage on USB 3.2 Gen 1 USB3UP_xxxx and USB3DN_xxxx signal pins 1.32 V with respect to ground 31
Storage Temperature -55 150 °C 31
Junction Temperature 125 °C 31
HBM ESD Performance 3 kV HBM 31
Maximum Power Dissipation PD(max) 921 mW 32
Package thermal resistance junction-to-ambient JA 30 °C/W 0 m/s air velocity, 2S2P PCB 32
Package thermal resistance junction-to-ambient JA 26 °C/W 1 m/s air velocity, 2S2P PCB 32
Package thermal parameter junction-to-top JT 0.2 °C/W 0 m/s air velocity, 2S2P PCB 32
Package thermal parameter junction-to-top JT 0.3 °C/W 1 m/s air velocity, 2S2P PCB 32
Package thermal resistance junction-to-case JC 2.6 °C/W 0 m/s air velocity, 2S2P PCB 32
Low Output Level, O6 buffer VOL 0.4 V IOL = 6 mA 34
Low Output Level, O12 buffer VOL 0.4 V IOL = 12 mA 34
Low Output Level, OD12 buffer VOL 0.4 V IOL = 12 mA 34
Schmitt Trigger Hysteresis (VIHT - VILT), IS buffer VHYS 9 20 40 mV 34

CAD (KiCad official)

  • Symbol: USB5742B-I
  • Footprint: Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm
  • 3D model: VQFN-56(7x7) (KiCad packages3D, STEP)
  • 3D model files: usb5742b-i-2g-etched.step / usb5742b-i-2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); usb5742b-i-2g.step / usb5742b-i-2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Technology datasheet (49 pp, sha256 fb8ca1d5d735ff6f, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF