Generated by kicad-footprint-generator · KiCad file format 20260206
USB5742B-I
Microchip Technology · Communication Interface Chip/UART/485/232 · VQFN-56(7x7)
USB5742B-I from Microchip Technology, in a VQFN-56(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | USB2DN_DP1/PRT_DIS_P1 | bidirectional | USB 2.0 downstream port 1 data plus (D+), also the PRT_DIS_P1 port-disable strap that must be tied to 3.3 V with PRT_DIS_M1 to disable port 1. |
| 2 | USB2DN_DM1/PRT_DIS_M1 | bidirectional | USB 2.0 downstream port 1 data minus (D-), also the PRT_DIS_M1 port-disable strap that must be tied to 3.3 V with PRT_DIS_P1 to disable port 1. |
| 3 | USB3DN_TXDP1 | bidirectional | USB 3.2 Gen 1 downstream port 1 SuperSpeed transmit data plus; leave floating if unused. |
| 4 | USB3DN_TXDM1 | bidirectional | USB 3.2 Gen 1 downstream port 1 SuperSpeed transmit data minus; leave floating if unused. |
| 5 | VDD12 | power_in | +1.2 V core power supply pin. |
| 6 | USB3DN_RXDP1 | bidirectional | USB 3.2 Gen 1 downstream port 1 SuperSpeed receive data plus; leave floating if unused. |
| 7 | USB3DN_RXDM1 | bidirectional | USB 3.2 Gen 1 downstream port 1 SuperSpeed receive data minus; leave floating if unused. |
| 8 | USB2DN_DP2/PRT_DIS_P2 | bidirectional | USB 2.0 downstream port 2 data plus (D+), also the PRT_DIS_P2 port-disable strap that must be tied to 3.3 V with PRT_DIS_M2 to disable port 2. |
| 9 | USB2DN_DM2/PRT_DIS_M2 | bidirectional | USB 2.0 downstream port 2 data minus (D-), also the PRT_DIS_M2 port-disable strap that must be tied to 3.3 V with PRT_DIS_P2 to disable port 2. |
| 10 | USB3DN_TXDP2 | bidirectional | USB 3.2 Gen 1 downstream port 2 SuperSpeed transmit data plus; leave floating if unused. |
| 11 | USB3DN_TXDM2 | bidirectional | USB 3.2 Gen 1 downstream port 2 SuperSpeed transmit data minus; leave floating if unused. |
| 12 | VDD12 | power_in | +1.2 V core power supply pin. |
| 13 | USB3DN_RXDP2 | bidirectional | USB 3.2 Gen 1 downstream port 2 SuperSpeed receive data plus; leave floating if unused. |
| 14 | USB3DN_RXDM2 | bidirectional | USB 3.2 Gen 1 downstream port 2 SuperSpeed receive data minus; leave floating if unused. |
| 15 | VDD12 | power_in | +1.2 V core power supply pin. |
| 16 | VDD33 | power_in | +3.3 V power supply and internal regulator input. |
| 17 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 18 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 19 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 20 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 21 | VDD12 | power_in | +1.2 V core power supply pin. |
| 22 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 23 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 24 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 25 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 26 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 27 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 28 | VDD12 | power_in | +1.2 V core power supply pin. |
| 29 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 30 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 31 | VDD33 | power_in | +3.3 V power supply and internal regulator input. |
| 32 | GPIO20/GANG_PWR | bidirectional | General purpose I/O 20 (6 mA buffer); when pulled high it enables gang mode and serves as the gang power pin. |
| 33 | VDD12 | power_in | +1.2 V core power supply pin. |
| 34 | GPIO19 | bidirectional | General purpose input/output 19 (6 mA buffer). |
| 35 | PRT_CTL2 | bidirectional | Port 2 power enable output (active high) and overcurrent sense input from an external current monitor; leave floating if unused. |
| 36 | PRT_CTL1 | bidirectional | Port 1 power enable output (active high) and overcurrent sense input from an external current monitor; leave floating if unused. |
| 37 | VBUS_DET | input | Detects the state of the upstream bus power; must be fed through a resistor divider (50 k by 100 k) to provide 3.3 V on detachable hubs. |
| 38 | SPI_CLK/SMCLK | bidirectional | SPI clock output to the serial ROM in SPI mode, or open-drain SMBus clock (12 mA sink) in SMBus slave mode; also strap SPI_CLK pin for SMBus selection with a 10 kΩ pull-up. |
| 39 | SPI_DO/SMDAT | bidirectional | SPI data output in SPI mode, or SMBus data pin in SMBus slave mode; a 10 kΩ pull-up on this pin selects SMBus slave mode. |
| 40 | SPI_DI/CFG_BC_EN | input | SPI data input in SPI mode, or battery charging configuration strap (CFG_BC_EN) in SMBus slave mode. |
| 41 | SPI_CE_N/CFG_NON_REM | bidirectional | Active low SPI chip enable output in SPI mode, or non-removable port configuration strap (CFG_NON_REM) in SMBus slave mode. |
| 42 | RESET_N | input | Active low reset input that places the device into Reset (Standby) Mode when asserted. |
| 43 | VDD12 | power_in | +1.2 V core power supply pin. |
| 44 | VDD33 | power_in | +3.3 V power supply and internal regulator input. |
| 45 | USB2UP_DP | bidirectional | USB 2.0 upstream data plus (D+). |
| 46 | USB2UP_DM | bidirectional | USB 2.0 upstream data minus (D-). |
| 47 | USB3UP_TXDP | bidirectional | USB 3.2 Gen 1 upstream SuperSpeed transmit data plus. |
| 48 | USB3UP_TXDM | bidirectional | USB 3.2 Gen 1 upstream SuperSpeed transmit data minus. |
| 49 | VDD12 | power_in | +1.2 V core power supply pin. |
| 50 | USB3UP_RXDP | bidirectional | USB 3.2 Gen 1 upstream SuperSpeed receive data plus. |
| 51 | USB3UP_RXDM | bidirectional | USB 3.2 Gen 1 upstream SuperSpeed receive data minus. |
| 52 | ATEST | passive | Analog test pin for test purposes that must always be connected to ground. |
| 53 | XTALO | output | External 25 MHz crystal output; left unconnected when an external clock oscillator drives XTALI/CLK_IN. |
| 54 | XTALI/CLK_IN | input | External 25 MHz crystal input, or external single-ended reference clock input. |
| 55 | VDD33 | power_in | +3.3 V power supply and internal regulator input. |
| 56 | RBIAS | passive | A 12.0 kΩ (+/- 1%) resistor is attached from ground to this pin to set the transceiver's internal bias settings. |
| 57 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Technology |
| Package | VQFN-56(7x7) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 57 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| +3.3 V Supply Voltage (VDD33) operating | VDD33 | 3 | 3.6 | V | 31 | ||
| +1.2 V Supply Voltage (VDD12) operating | VDD12 | 1.08 | 1.32 | V | 31 | ||
| Input Signal Pins Voltage | -0.3 | 3.6 | V | 31 | |||
| XTALI/CLK_IN Voltage | -0.3 | 3.6 | V | 31 | |||
| USB 2.0 DP/DM Signal Pins Voltage | -0.3 | 5.5 | V | 31 | |||
| USB 3.2 Gen 1 USB3UP_xxxx and USB3DN_xxxx Signal Pins Voltage | -0.3 | 1.32 | V | 31 | |||
| Ambient Operating Temperature in Still Air (TA) | TA | -40 | 85 | °C | Industrial version (-I), still air, per Note 3 | 31 | |
| +1.2 V Supply Voltage Rise Time (TRT) | TRT | 5 | ms | 31 | |||
| +3.3 V Supply Voltage Rise Time (TRT) | TRT | 5 | ms | 31 | |||
| +1.2 V Supply Voltage (VDD12) absolute maximum | VDD12 | -0.5 | 1.32 | V | Note 1 | 31 | |
| +3.3 V Supply Voltage (VDD33) absolute maximum | VDD33 | -0.5 | 4.6 | V | Note 1 | 31 | |
| Positive voltage on input signal pins | 4.6 | V | with respect to ground (Note 2) | 31 | |||
| Negative voltage on input signal pins | -0.5 | V | with respect to ground | 31 | |||
| Positive voltage on XTALI/CLK_IN | 3.63 | V | with respect to ground | 31 | |||
| Positive voltage on USB DP/DM signal pins | 6 | V | with respect to ground | 31 | |||
| Positive voltage on USB 3.2 Gen 1 USB3UP_xxxx and USB3DN_xxxx signal pins | 1.32 | V | with respect to ground | 31 | |||
| Storage Temperature | -55 | 150 | °C | 31 | |||
| Junction Temperature | 125 | °C | 31 | ||||
| HBM ESD Performance | 3 | kV | HBM | 31 | |||
| Maximum Power Dissipation | PD(max) | 921 | mW | 32 | |||
| Package thermal resistance junction-to-ambient | JA | 30 | °C/W | 0 m/s air velocity, 2S2P PCB | 32 | ||
| Package thermal resistance junction-to-ambient | JA | 26 | °C/W | 1 m/s air velocity, 2S2P PCB | 32 | ||
| Package thermal parameter junction-to-top | JT | 0.2 | °C/W | 0 m/s air velocity, 2S2P PCB | 32 | ||
| Package thermal parameter junction-to-top | JT | 0.3 | °C/W | 1 m/s air velocity, 2S2P PCB | 32 | ||
| Package thermal resistance junction-to-case | JC | 2.6 | °C/W | 0 m/s air velocity, 2S2P PCB | 32 | ||
| Low Output Level, O6 buffer | VOL | 0.4 | V | IOL = 6 mA | 34 | ||
| Low Output Level, O12 buffer | VOL | 0.4 | V | IOL = 12 mA | 34 | ||
| Low Output Level, OD12 buffer | VOL | 0.4 | V | IOL = 12 mA | 34 | ||
| Schmitt Trigger Hysteresis (VIHT - VILT), IS buffer | VHYS | 9 | 20 | 40 | mV | 34 |
CAD (KiCad official)
- Symbol:
USB5742B-I - Footprint:
Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm - 3D model: VQFN-56(7x7) (KiCad packages3D, STEP)
- 3D model files:
usb5742b-i-2g-etched.step/usb5742b-i-2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);usb5742b-i-2g.step/usb5742b-i-2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Technology datasheet (49 pp, sha256
fb8ca1d5d735ff6f, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).