main
History Download
Ray Publish 0.1.0 8e9647e

UM13088S8

Union Semiconductor · RS-485 / RS-422 ICs · SOP-8

UM13088S8 from Union Semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: RO goes high if A is greater than B by -50 mV or more, and goes low if A is less than B by -200 mV.
2 RE input Active-low receiver output enable: RO is high impedance when RE is high, and driving RE high with DE low puts the device into low-power shutdown mode.
3 DE input Driver enable: drive DE high to enable the drivers, with outputs high impedance when DE is low, and drive RE high with DE low to enter low-power shutdown mode.
4 DI input Driver input: a low on DI forces output A low and output B high, and a high on DI forces output A high and output B low.
5 GND power_in Ground reference for the RS-485 transceiver; all voltages are referred to device ground.
6 A bidirectional Non-inverting receiver input and non-inverting driver output on the RS-485 bus; bus input range is -7 V to +12 V common-mode.
7 B bidirectional Inverting receiver input and inverting driver output on the RS-485 bus; bus input range is -7 V to +12 V common-mode.
8 VCC power_in Power supply for the RS-485 transceiver, specified at 3.0 V to 5.5 V in the DC characteristics.

Key specifications

Parameter Value
Manufacturer Union Semiconductor
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 6 V 3
Driver Output Voltage (A, B) -7.5 12.5 V 3
Receiver Input Voltage (A, B) -7.5 12.5 V 3
TA Ambient Temperature TA -40 85 °C 3
TJ Operating Junction Temperature TJ -40 125 °C 3
Storage Temperature Range TSTG -65 160 °C 3
Lead Temperature for Soldering TL 300 °C 10 seconds 3
ESD HBM (RS-485 bus pins A, B) ESD -8 8 kV HBM - Human Body Model (RS-485 bus pins A, B) 3
ESD HBM (all other pins) ESD -4 4 kV HBM - Human Body Model (all other pins) 3
Supply-Voltage Range VCC 3 5.5 V 4
Supply Current ICC 0.65 1.3 mA No Load, DI=GND or VCC, DE=VCC, RE=0V or VCC 4
Supply Current ICC 0.6 1.2 mA DE=0V, RE=0V 4
Supply Current in Shutdown Mode ISHDN 1 10 µA DE=GND, RE=VCC 4
Input Low Voltage VIL 0.8 V DE, DI, RE 4
Logic Input Current IIN1 -1 1 µA DE, DI, RE 4
Receiver Output Low Voltage (RO) VOL 0.4 V IOUT=1mA 4
Driver Short-Circuit Output Current IOSD -250 mA VOUT= -7V 4
Driver Short-Circuit Output Current IOSD 250 mA VOUT=12V 4
Receiver Differential Threshold Voltage VTH -200 -50 mV -7V≤VCM≤12V 5
Input Current (A and B) IIN2 1 mA DE=GND, VCC=GND or 3.3V, VIN=12V 5
Input Current (A and B) IIN2 -0.8 mA DE=GND, VCC=GND or 3.3V, VIN= -7V 5
Three-State Output Current at Receiver IOZR -1 1 µA 0V≤VO≤VCC 5
Receiver Output Short Circuit Current IOSR -60 60 mA 0V≤VRO≤VCC 5
Maximum Data Rate fMAX 10 Mbps 6
Driver Input-to-Output (rising) tDPLH 10 25 50 ns Figure 3 and 6, RDIFF=54Ω, CL1=CL2=50pF 6
Driver Input-to-Output (falling) tDPHL 10 25 50 ns Figure 3 and 6, RDIFF=54Ω, CL1=CL2=50pF 6
Driver Output Skew tDSKEW 5 10 ns Figure 3 and 6, RDIFF=54Ω, CL1=CL2=50pF 6
Driver Rise or Fall Time tDR, tDF 15 ns Figure 3 and 6, RDIFF=54Ω, CL1=CL2=50pF 6
Driver Enable to Output High tDZH 40 70 ns Figure 4 and 7, CL=50pF, S2 Closed 6
Driver Enable to Output Low tDZL 40 70 ns Figure 4 and 7, CL=50pF, S1 Closed 6
Driver Disable Time from Low tDLZ 40 70 ns Figure 4 and 7, CL=50pF, S1 Closed 6
Driver Disable Time from High tDHZ 40 70 ns Figure 4 and 7, CL=50pF, S2 Closed 6
Receiver Input to Output tRPLH, tRPHL 20 50 80 ns CL=15pF, Figure 8, /VID/≥2.0V, Rise and Fall Time of VID≤15ns 6
Differential Receiver Skew tRSKD 8 15 ns CL=15pF, Figure 8, /VID/≥2.0V, Rise and Fall Time of VID≤15ns 6
Receiver Enable to Output Low tRZL 25 50 ns Figure 5 and 9, CL=15pF, S1 Closed 6
Receiver Enable to Output High tRZH 25 50 ns Figure 5 and 9, CL=15pF, S2 Closed 6
Receiver Disable Time from Low tRLZ 25 50 ns Figure 5 and 9, CL=15pF, S1 Closed 6
Receiver Disable Time from High tRHZ 25 50 ns Figure 5 and 9, CL=15pF, S2 Closed 6
Time to Shutdown tSHDN 1000 ns (Note 4) 6
Driver Enable from Shutdown to Output High tDZH(SHDN) 3 μs Figure 4 and 7, CL=15pF, S2 Closed 6
Driver Enable from Shutdown to Output Low tDZL(SHDN) 3 μs Figure 4 and 7, CL=15pF, S1 Closed 6
Receiver Enable from Shutdown to Output High tRZH(SHDN) 3 μs Figure 5 and 9, CL=15pF, S2 Closed 6
Receiver Enable from Shutdown to Output Low tRZL(SHDN) 3 μs Figure 5 and 9, CL=15pF, S1 Closed 6
Driver Common-Mode Output Voltage VOC 3 V Figure 2, RL=54Ω 4
Input Low Voltage Hysteresis VHYS 300 mV 4
Differential Driver Output Voltage VOD2 1.5 V RL=54 Ω, VCC=3.3V 4
Change-in-Magnitude of Differential Output Voltage ΔVOD 0.2 V Figure 2, RL=54Ω 4
Change-in-Magnitude of Common-Mode Voltage ΔVOC 0.2 V Figure 2, RL=54Ω 4
Receiver Input Hysteresis ΔVTH 25 mV VCM=0V 5
Receiver Input Resistance RIN 96 kΩ -7V≤VCM≤12V 5
Junction-to-ambient thermal resistance (SOP8) RθJA 121 °C/W SOP8 3
Junction-to-case (top) thermal resistance (SOP8) RθJC(top) 41 °C/W SOP8 3

CAD (KiCad official)

  • Symbol: UM13088S8
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: um13088s8-etched.step / um13088s8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); um13088s8.step / um13088s8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Union Semiconductor datasheet (11 pp, sha256 eba1cdb25711f243, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF