3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownUM13088S8
Union Semiconductor · RS-485 / RS-422 ICs · SOP-8
UM13088S8 from Union Semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO goes high if A is greater than B by -50 mV or more, and goes low if A is less than B by -200 mV. |
| 2 | RE | input | Active-low receiver output enable: RO is high impedance when RE is high, and driving RE high with DE low puts the device into low-power shutdown mode. |
| 3 | DE | input | Driver enable: drive DE high to enable the drivers, with outputs high impedance when DE is low, and drive RE high with DE low to enter low-power shutdown mode. |
| 4 | DI | input | Driver input: a low on DI forces output A low and output B high, and a high on DI forces output A high and output B low. |
| 5 | GND | power_in | Ground reference for the RS-485 transceiver; all voltages are referred to device ground. |
| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output on the RS-485 bus; bus input range is -7 V to +12 V common-mode. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output on the RS-485 bus; bus input range is -7 V to +12 V common-mode. |
| 8 | VCC | power_in | Power supply for the RS-485 transceiver, specified at 3.0 V to 5.5 V in the DC characteristics. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Union Semiconductor |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 6 | V | 3 | |||
| Driver Output Voltage (A, B) | -7.5 | 12.5 | V | 3 | |||
| Receiver Input Voltage (A, B) | -7.5 | 12.5 | V | 3 | |||
| TA Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| TJ Operating Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature Range | TSTG | -65 | 160 | °C | 3 | ||
| Lead Temperature for Soldering | TL | 300 | °C | 10 seconds | 3 | ||
| ESD HBM (RS-485 bus pins A, B) | ESD | -8 | 8 | kV | HBM - Human Body Model (RS-485 bus pins A, B) | 3 | |
| ESD HBM (all other pins) | ESD | -4 | 4 | kV | HBM - Human Body Model (all other pins) | 3 | |
| Supply-Voltage Range | VCC | 3 | 5.5 | V | 4 | ||
| Supply Current | ICC | 0.65 | 1.3 | mA | No Load, DI=GND or VCC, DE=VCC, RE=0V or VCC | 4 | |
| Supply Current | ICC | 0.6 | 1.2 | mA | DE=0V, RE=0V | 4 | |
| Supply Current in Shutdown Mode | ISHDN | 1 | 10 | µA | DE=GND, RE=VCC | 4 | |
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 4 | ||
| Logic Input Current | IIN1 | -1 | 1 | µA | DE, DI, RE | 4 | |
| Receiver Output Low Voltage (RO) | VOL | 0.4 | V | IOUT=1mA | 4 | ||
| Driver Short-Circuit Output Current | IOSD | -250 | mA | VOUT= -7V | 4 | ||
| Driver Short-Circuit Output Current | IOSD | 250 | mA | VOUT=12V | 4 | ||
| Receiver Differential Threshold Voltage | VTH | -200 | -50 | mV | -7V≤VCM≤12V | 5 | |
| Input Current (A and B) | IIN2 | 1 | mA | DE=GND, VCC=GND or 3.3V, VIN=12V | 5 | ||
| Input Current (A and B) | IIN2 | -0.8 | mA | DE=GND, VCC=GND or 3.3V, VIN= -7V | 5 | ||
| Three-State Output Current at Receiver | IOZR | -1 | 1 | µA | 0V≤VO≤VCC | 5 | |
| Receiver Output Short Circuit Current | IOSR | -60 | 60 | mA | 0V≤VRO≤VCC | 5 | |
| Maximum Data Rate | fMAX | 10 | Mbps | 6 | |||
| Driver Input-to-Output (rising) | tDPLH | 10 | 25 | 50 | ns | Figure 3 and 6, RDIFF=54Ω, CL1=CL2=50pF | 6 |
| Driver Input-to-Output (falling) | tDPHL | 10 | 25 | 50 | ns | Figure 3 and 6, RDIFF=54Ω, CL1=CL2=50pF | 6 |
| Driver Output Skew | tDSKEW | 5 | 10 | ns | Figure 3 and 6, RDIFF=54Ω, CL1=CL2=50pF | 6 | |
| Driver Rise or Fall Time | tDR, tDF | 15 | ns | Figure 3 and 6, RDIFF=54Ω, CL1=CL2=50pF | 6 | ||
| Driver Enable to Output High | tDZH | 40 | 70 | ns | Figure 4 and 7, CL=50pF, S2 Closed | 6 | |
| Driver Enable to Output Low | tDZL | 40 | 70 | ns | Figure 4 and 7, CL=50pF, S1 Closed | 6 | |
| Driver Disable Time from Low | tDLZ | 40 | 70 | ns | Figure 4 and 7, CL=50pF, S1 Closed | 6 | |
| Driver Disable Time from High | tDHZ | 40 | 70 | ns | Figure 4 and 7, CL=50pF, S2 Closed | 6 | |
| Receiver Input to Output | tRPLH, tRPHL | 20 | 50 | 80 | ns | CL=15pF, Figure 8, /VID/≥2.0V, Rise and Fall Time of VID≤15ns | 6 |
| Differential Receiver Skew | tRSKD | 8 | 15 | ns | CL=15pF, Figure 8, /VID/≥2.0V, Rise and Fall Time of VID≤15ns | 6 | |
| Receiver Enable to Output Low | tRZL | 25 | 50 | ns | Figure 5 and 9, CL=15pF, S1 Closed | 6 | |
| Receiver Enable to Output High | tRZH | 25 | 50 | ns | Figure 5 and 9, CL=15pF, S2 Closed | 6 | |
| Receiver Disable Time from Low | tRLZ | 25 | 50 | ns | Figure 5 and 9, CL=15pF, S1 Closed | 6 | |
| Receiver Disable Time from High | tRHZ | 25 | 50 | ns | Figure 5 and 9, CL=15pF, S2 Closed | 6 | |
| Time to Shutdown | tSHDN | 1000 | ns | (Note 4) | 6 | ||
| Driver Enable from Shutdown to Output High | tDZH(SHDN) | 3 | μs | Figure 4 and 7, CL=15pF, S2 Closed | 6 | ||
| Driver Enable from Shutdown to Output Low | tDZL(SHDN) | 3 | μs | Figure 4 and 7, CL=15pF, S1 Closed | 6 | ||
| Receiver Enable from Shutdown to Output High | tRZH(SHDN) | 3 | μs | Figure 5 and 9, CL=15pF, S2 Closed | 6 | ||
| Receiver Enable from Shutdown to Output Low | tRZL(SHDN) | 3 | μs | Figure 5 and 9, CL=15pF, S1 Closed | 6 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | Figure 2, RL=54Ω | 4 | ||
| Input Low Voltage Hysteresis | VHYS | 300 | mV | 4 | |||
| Differential Driver Output Voltage | VOD2 | 1.5 | V | RL=54 Ω, VCC=3.3V | 4 | ||
| Change-in-Magnitude of Differential Output Voltage | ΔVOD | 0.2 | V | Figure 2, RL=54Ω | 4 | ||
| Change-in-Magnitude of Common-Mode Voltage | ΔVOC | 0.2 | V | Figure 2, RL=54Ω | 4 | ||
| Receiver Input Hysteresis | ΔVTH | 25 | mV | VCM=0V | 5 | ||
| Receiver Input Resistance | RIN | 96 | kΩ | -7V≤VCM≤12V | 5 | ||
| Junction-to-ambient thermal resistance (SOP8) | RθJA | 121 | °C/W | SOP8 | 3 | ||
| Junction-to-case (top) thermal resistance (SOP8) | RθJC(top) | 41 | °C/W | SOP8 | 3 |
CAD (KiCad official)
- Symbol:
UM13088S8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
um13088s8-etched.step/um13088s8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);um13088s8.step/um13088s8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Union Semiconductor datasheet (11 pp, sha256
eba1cdb25711f243, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).