main
Ray
Publish 0.1.0
d56b3c5
ULN2003AIN
Texas Instruments · Darlington Transistor Arrays · PDIP-16
ULN2003AIN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Channel 1 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 2 | 2B | input | Channel 2 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 3 | 3B | input | Channel 3 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 4 | 4B | input | Channel 4 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 5 | 5B | input | Channel 5 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 6 | 6B | input | Channel 6 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 7 | 7B | input | Channel 7 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 8 | E | power_in | Common emitter shared by all channels, typically tied to ground. |
| 9 | COM | passive | Common cathode node for flyback diodes, required for inductive loads. |
| 10 | 7C | output | Channel 7 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 11 | 6C | output | Channel 6 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 12 | 5C | output | Channel 5 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 13 | 4C | output | Channel 4 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 14 | 3C | output | Channel 3 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 15 | 2C | output | Channel 2 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 16 | 1C | output | Channel 1 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Transistors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-emitter voltage | VCC | 50 | V | 4 | |||
| Clamp diode reverse voltage | VR | 50 | V | 4 | |||
| Input voltage | VI | 30 | V | 4 | |||
| Peak collector current | 500 | mA | See Figure 4 and Figure 5 | 4 | |||
| Output clamp current | IOK | 500 | mA | 4 | |||
| Total emitter-terminal current | -2.5 | A | 4 | ||||
| Operating free-air temperature range (ULN200xAI) | TA | -40 | 105 | °C | 4 | ||
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Lead temperature | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Collector-emitter voltage (non-V devices) | VCC | 0 | 50 | V | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (N PDIP) | RθJA | 67 | °C/W | N (PDIP) 16 pins | 4 | ||
| Junction-to-case (top) thermal resistance (N PDIP) | RθJC(top) | 54 | °C/W | N (PDIP) 16 pins | 4 | ||
| ICEX Collector cutoff current | ICEX | 100 | μA | VCE = 50 V, II = 0 | 6 | ||
| Collector-emitter saturation voltage | VCE(sat) | 0.9 | 1.2 | V | II = 250 μA, IC = 100 mA | 6 | |
| Collector-emitter saturation voltage | VCE(sat) | 1 | 1.4 | V | II = 350 μA, IC = 200 mA | 6 | |
| Collector-emitter saturation voltage | VCE(sat) | 1.2 | 1.7 | V | II = 500 μA, IC = 350 mA | 6 | |
| Clamp forward voltage | VF | 1.7 | 2.2 | V | IF = 350 mA | 6 | |
| OFF-state input current | II(off) | 30 | 65 | μA | VCE = 50 V, IC = 500 μA | 6 | |
| Input current | II | 0.93 | 1.35 | mA | VI = 3.85 V | 6 | |
| Clamp reverse current | IR | 100 | μA | VR = 50 V | 6 | ||
| Input capacitance | Ci | 15 | 25 | pF | VI = 0, f = 1 MHz | 6 | |
| ON-state input voltage | VI(on) | 2.7 | V | VCE = 2 V, IC = 200 mA | 6 | ||
| ON-state input voltage | VI(on) | 2.9 | V | VCE = 2 V, IC = 250 mA | 6 | ||
| ON-state input voltage | VI(on) | 3 | V | VCE = 2 V, IC = 300 mA | 6 | ||
| Propagation delay time, low- to high-level output | tPLH | 1 | 10 | μs | See Figure 17 | 8 | |
| Propagation delay time, high- to low-level output | tPHL | 1 | 10 | μs | See Figure 17 | 8 |
CAD (KiCad official)
- Symbol:
ULN2003AIN - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files:
uln2003ain-etched.step/uln2003ain-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);uln2003ain.step/uln2003ain.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
aaa488e32666a579, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ULN2003AIN
**Texas Instruments** · Darlington Transistor Arrays · PDIP-16
ULN2003AIN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Channel 1 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 2 | 2B | input | Channel 2 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 3 | 3B | input | Channel 3 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 4 | 4B | input | Channel 4 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 5 | 5B | input | Channel 5 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 6 | 6B | input | Channel 6 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 7 | 7B | input | Channel 7 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices. |
| 8 | E | power_in | Common emitter shared by all channels, typically tied to ground. |
| 9 | COM | passive | Common cathode node for flyback diodes, required for inductive loads. |
| 10 | 7C | output | Channel 7 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 11 | 6C | output | Channel 6 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 12 | 5C | output | Channel 5 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 13 | 4C | output | Channel 4 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 14 | 3C | output | Channel 3 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 15 | 2C | output | Channel 2 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
| 16 | 1C | output | Channel 1 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Transistors |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-emitter voltage | VCC | | | 50 | V | | 4 |
| Clamp diode reverse voltage | VR | | | 50 | V | | 4 |
| Input voltage | VI | | | 30 | V | | 4 |
| Peak collector current | | | | 500 | mA | See Figure 4 and Figure 5 | 4 |
| Output clamp current | IOK | | | 500 | mA | | 4 |
| Total emitter-terminal current | | -2.5 | | | A | | 4 |
| Operating free-air temperature range (ULN200xAI) | TA | -40 | | 105 | °C | | 4 |
| Operating virtual junction temperature | TJ | | | 150 | °C | | 4 |
| Lead temperature | | | | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Collector-emitter voltage (non-V devices) | VCC | 0 | | 50 | V | | 4 |
| Junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance (N PDIP) | RθJA | | 67 | | °C/W | N (PDIP) 16 pins | 4 |
| Junction-to-case (top) thermal resistance (N PDIP) | RθJC(top) | | 54 | | °C/W | N (PDIP) 16 pins | 4 |
| ICEX Collector cutoff current | ICEX | | | 100 | μA | VCE = 50 V, II = 0 | 6 |
| Collector-emitter saturation voltage | VCE(sat) | | 0.9 | 1.2 | V | II = 250 μA, IC = 100 mA | 6 |
| Collector-emitter saturation voltage | VCE(sat) | | 1 | 1.4 | V | II = 350 μA, IC = 200 mA | 6 |
| Collector-emitter saturation voltage | VCE(sat) | | 1.2 | 1.7 | V | II = 500 μA, IC = 350 mA | 6 |
| Clamp forward voltage | VF | | 1.7 | 2.2 | V | IF = 350 mA | 6 |
| OFF-state input current | II(off) | | 30 | 65 | μA | VCE = 50 V, IC = 500 μA | 6 |
| Input current | II | | 0.93 | 1.35 | mA | VI = 3.85 V | 6 |
| Clamp reverse current | IR | | | 100 | μA | VR = 50 V | 6 |
| Input capacitance | Ci | | 15 | 25 | pF | VI = 0, f = 1 MHz | 6 |
| ON-state input voltage | VI(on) | | | 2.7 | V | VCE = 2 V, IC = 200 mA | 6 |
| ON-state input voltage | VI(on) | | | 2.9 | V | VCE = 2 V, IC = 250 mA | 6 |
| ON-state input voltage | VI(on) | | | 3 | V | VCE = 2 V, IC = 300 mA | 6 |
| Propagation delay time, low- to high-level output | tPLH | | 1 | 10 | μs | See Figure 17 | 8 |
| Propagation delay time, high- to low-level output | tPHL | | 1 | 10 | μs | See Figure 17 | 8 |
## CAD (KiCad official)
- Symbol: `ULN2003AIN`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files: `uln2003ain-etched.step` / `uln2003ain-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `uln2003ain.step` / `uln2003ain.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/uln2003ain.pdf) (34 pp, sha256 `aaa488e32666a579`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/uln2003ain-datasheet.pdf)