main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers uln2003ain: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
uln2003ain-etched.glb Publish 0.1.0 · Ray
uln2003ain-etched.step uln2003ain: factory component page (tier=mfr) · Ray
uln2003ain-hero.glb uln2003ain: hero GLB from the etched model (keeps the MPN mark) · Ray
uln2003ain-hero.overlay.json Publish 0.1.0 · Ray
uln2003ain.glb Publish 0.1.0 · Ray
uln2003ain.kicad_mod Publish 0.1.0 · Ray
uln2003ain.kicad_sym Publish 0.1.0 · Ray
uln2003ain.lbr Publish 0.1.0 · Ray
uln2003ain.step Publish 0.1.0 · Ray

ULN2003AIN

Texas Instruments · Darlington Transistor Arrays · PDIP-16

ULN2003AIN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1B input Channel 1 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices.
2 2B input Channel 2 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices.
3 3B input Channel 3 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices.
4 4B input Channel 4 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices.
5 5B input Channel 5 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices.
6 6B input Channel 6 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices.
7 7B input Channel 7 Darlington base input; the ULx2003A base has a 2.7-kΩ series resistor for operation directly with TTL or 5-V CMOS devices.
8 E power_in Common emitter shared by all channels, typically tied to ground.
9 COM passive Common cathode node for flyback diodes, required for inductive loads.
10 7C output Channel 7 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs.
11 6C output Channel 6 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs.
12 5C output Channel 5 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs.
13 4C output Channel 4 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs.
14 3C output Channel 3 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs.
15 2C output Channel 2 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs.
16 1C output Channel 1 Darlington collector output; each single output is rated for 500 mA collector current with 50-V high-voltage outputs.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-16
Category Transistors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-emitter voltage VCC 50 V 4
Clamp diode reverse voltage VR 50 V 4
Input voltage VI 30 V 4
Peak collector current 500 mA See Figure 4 and Figure 5 4
Output clamp current IOK 500 mA 4
Total emitter-terminal current -2.5 A 4
Operating free-air temperature range (ULN200xAI) TA -40 105 °C 4
Operating virtual junction temperature TJ 150 °C 4
Lead temperature 260 °C 1.6 mm (1/16 inch) from case for 10 seconds 4
Storage temperature Tstg -65 150 °C 4
Collector-emitter voltage (non-V devices) VCC 0 50 V 4
Junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance (N PDIP) RθJA 67 °C/W N (PDIP) 16 pins 4
Junction-to-case (top) thermal resistance (N PDIP) RθJC(top) 54 °C/W N (PDIP) 16 pins 4
ICEX Collector cutoff current ICEX 100 μA VCE = 50 V, II = 0 6
Collector-emitter saturation voltage VCE(sat) 0.9 1.2 V II = 250 μA, IC = 100 mA 6
Collector-emitter saturation voltage VCE(sat) 1 1.4 V II = 350 μA, IC = 200 mA 6
Collector-emitter saturation voltage VCE(sat) 1.2 1.7 V II = 500 μA, IC = 350 mA 6
Clamp forward voltage VF 1.7 2.2 V IF = 350 mA 6
OFF-state input current II(off) 30 65 μA VCE = 50 V, IC = 500 μA 6
Input current II 0.93 1.35 mA VI = 3.85 V 6
Clamp reverse current IR 100 μA VR = 50 V 6
Input capacitance Ci 15 25 pF VI = 0, f = 1 MHz 6
ON-state input voltage VI(on) 2.7 V VCE = 2 V, IC = 200 mA 6
ON-state input voltage VI(on) 2.9 V VCE = 2 V, IC = 250 mA 6
ON-state input voltage VI(on) 3 V VCE = 2 V, IC = 300 mA 6
Propagation delay time, low- to high-level output tPLH 1 10 μs See Figure 17 8
Propagation delay time, high- to low-level output tPHL 1 10 μs See Figure 17 8

CAD (KiCad official)

  • Symbol: ULN2003AIN
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: PDIP-16 (KiCad packages3D, STEP)
  • 3D model files: uln2003ain-etched.step / uln2003ain-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uln2003ain.step / uln2003ain.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 aaa488e32666a579, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF