main
Ray Publish 0.1.0 778adc8

UEI15-120-Q12N-C

Murata Electronics · Power Modules · DIP-6

UEI15-120-Q12N-C from Murata Electronics, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +Vin power_in Positive input terminal; Q12 models accept 9 to 36 Vdc input.
2 -Vin power_in Negative input terminal, serving as the input return for the 9 to 36 Vdc range.
3 +Vout power_out Positive 12 V regulated output, rated at 1.3 A maximum for the UEI15-120-Q12 model.
4 Output Trim passive Output trim pin that adjusts the output voltage within ±10% of nominal.
5 -Vout power_out Negative output terminal, serving as the output return.
6 On/Off Control input Negative-logic remote On/Off: ON with the Gnd pin or -0.7 to +0.8 V max, OFF with the pin open or +10 to +15 V max.

Key specifications

Parameter Value
Manufacturer Murata Electronics
Package DIP-6
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range Vin 9 24 36 V Q12 models, Vin nominal 24 V 2
Input voltage, max continuous Vin 36 VDC Q12 models, max. continuous 4
Input voltage, transient 100 ms Vin 50 VDC Q12 models, transient 100mS 4
On/Off control voltage, absolute maximum On/Off -0.3 15 V Referred to -Vin 4
Storage temperature range -55 125 °C 4
Operating temperature range -40 85 °C Usable range with derating 3
Start-up threshold voltage 10.5 11 V Start up at -40°C 4
Undervoltage shutdown 8.8 10 V @+25°C 4
Start-up threshold voltage (Q12 table) 9.5 V 3
Undervoltage shutdown (Q12 table) 8.4 V 3
Input current, no load Iin 15 mA Vin nominal 24 V, no load 2
Input current, full load Iin 0.77 A Vin nominal 24 V, full load 2
Output voltage nominal Vout 12 V 2
Output current maximum Iout 1.3 A 2
Output voltage accuracy Vout -1 1 % of Vnom 50% load 3
Output voltage adjustment range Vout -10 10 % of Vnom 3
Output temperature coefficient -0.02 0.02 % of Vout/°C 3
Line regulation -0.05 0.05 % Regulation max., line 2
Load regulation -0.05 0.05 % Regulation max., load 2
Efficiency 82.3 84.5 % Vin nominal 24 V, full load 2
Ripple and noise (R/N) 110 150 mVp-p 20 MHz bandwidth 2
Capacitive loading maximum 1000 µF Low ESR <0.02Ω 3
Isolation voltage input to output 2000 Vdc Basic insulation 3
Isolation resistance 10 MΩ 3
On voltage, negative logic On/Off -0.7 0.8 V Negative logic (N suffix): ON=Gnd pin 3
Off voltage, negative logic On/Off 10 15 V Negative logic (N suffix): OFF=open pin 3
Minimum output load 10 % of Imax Minimum output load 3
Dynamic load response 150 µSec 50-75-50% load step to 1% Vout 3
Peak deviation -150 150 mV 50-75-50% load step 3
Start-up time Vin to Vout regulated 340 mSec Vin to Vout regulated (max.) 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper alloy Pin Material Copper alloy 8

CAD (KiCad official)

  • Symbol: UEI15-120-Q12N-C
  • Footprint: Package_DIP:DIP-6_W7.62mm
  • 3D model: DIP-6 (KiCad packages3D, STEP)
  • 3D model files: uei15-120-q12n-c-etched.step / uei15-120-q12n-c-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uei15-120-q12n-c.step / uei15-120-q12n-c.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Murata Electronics datasheet (18 pp, sha256 3d7e27bd7e53cd09, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF