Generated by kicad-footprint-generator · KiCad file format 20260206
UEI15-120-Q12N-C
Murata Electronics · Power Modules · DIP-6
UEI15-120-Q12N-C from Murata Electronics, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +Vin | power_in | Positive input terminal; Q12 models accept 9 to 36 Vdc input. |
| 2 | -Vin | power_in | Negative input terminal, serving as the input return for the 9 to 36 Vdc range. |
| 3 | +Vout | power_out | Positive 12 V regulated output, rated at 1.3 A maximum for the UEI15-120-Q12 model. |
| 4 | Output Trim | passive | Output trim pin that adjusts the output voltage within ±10% of nominal. |
| 5 | -Vout | power_out | Negative output terminal, serving as the output return. |
| 6 | On/Off Control | input | Negative-logic remote On/Off: ON with the Gnd pin or -0.7 to +0.8 V max, OFF with the pin open or +10 to +15 V max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | DIP-6 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | Vin | 9 | 24 | 36 | V | Q12 models, Vin nominal 24 V | 2 |
| Input voltage, max continuous | Vin | 36 | VDC | Q12 models, max. continuous | 4 | ||
| Input voltage, transient 100 ms | Vin | 50 | VDC | Q12 models, transient 100mS | 4 | ||
| On/Off control voltage, absolute maximum | On/Off | -0.3 | 15 | V | Referred to -Vin | 4 | |
| Storage temperature range | -55 | 125 | °C | 4 | |||
| Operating temperature range | -40 | 85 | °C | Usable range with derating | 3 | ||
| Start-up threshold voltage | 10.5 | 11 | V | Start up at -40°C | 4 | ||
| Undervoltage shutdown | 8.8 | 10 | V | @+25°C | 4 | ||
| Start-up threshold voltage (Q12 table) | 9.5 | V | 3 | ||||
| Undervoltage shutdown (Q12 table) | 8.4 | V | 3 | ||||
| Input current, no load | Iin | 15 | mA | Vin nominal 24 V, no load | 2 | ||
| Input current, full load | Iin | 0.77 | A | Vin nominal 24 V, full load | 2 | ||
| Output voltage nominal | Vout | 12 | V | 2 | |||
| Output current maximum | Iout | 1.3 | A | 2 | |||
| Output voltage accuracy | Vout | -1 | 1 | % of Vnom | 50% load | 3 | |
| Output voltage adjustment range | Vout | -10 | 10 | % of Vnom | 3 | ||
| Output temperature coefficient | -0.02 | 0.02 | % of Vout/°C | 3 | |||
| Line regulation | -0.05 | 0.05 | % | Regulation max., line | 2 | ||
| Load regulation | -0.05 | 0.05 | % | Regulation max., load | 2 | ||
| Efficiency | 82.3 | 84.5 | % | Vin nominal 24 V, full load | 2 | ||
| Ripple and noise (R/N) | 110 | 150 | mVp-p | 20 MHz bandwidth | 2 | ||
| Capacitive loading maximum | 1000 | µF | Low ESR <0.02Ω | 3 | |||
| Isolation voltage input to output | 2000 | Vdc | Basic insulation | 3 | |||
| Isolation resistance | 10 | MΩ | 3 | ||||
| On voltage, negative logic | On/Off | -0.7 | 0.8 | V | Negative logic (N suffix): ON=Gnd pin | 3 | |
| Off voltage, negative logic | On/Off | 10 | 15 | V | Negative logic (N suffix): OFF=open pin | 3 | |
| Minimum output load | 10 | % of Imax | Minimum output load | 3 | |||
| Dynamic load response | 150 | µSec | 50-75-50% load step to 1% Vout | 3 | |||
| Peak deviation | -150 | 150 | mV | 50-75-50% load step | 3 | ||
| Start-up time Vin to Vout regulated | 340 | mSec | Vin to Vout regulated (max.) | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper alloy | Pin Material Copper alloy | 8 |
CAD (KiCad official)
- Symbol:
UEI15-120-Q12N-C - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
uei15-120-q12n-c-etched.step/uei15-120-q12n-c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);uei15-120-q12n-c.step/uei15-120-q12n-c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (18 pp, sha256
3d7e27bd7e53cd09, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).