Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UCD9090RGZR

Texas Instruments · DC-DC Converters · VQFN-48-EP(7x7)

UCD9090RGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MON1 input Analog monitor input, 0 V to 2.5 V.
2 MON2 input Analog monitor input, 0 V to 2.5 V.
3 RESET input Active-low device reset input; hold low for at least 2 µs to reset the device.
4 GPIO1 bidirectional General-purpose discrete input-output.
5 GPIO2 bidirectional General-purpose discrete input-output.
6 GPIO3 bidirectional General-purpose discrete input-output.
7 GPIO4 bidirectional General-purpose discrete input-output.
8 PMBus_CLK bidirectional PMBus clock; must have a pullup to 3.3 V.
9 PMBus_DATA bidirectional PMBus data; must have a pullup to 3.3 V.
10 FPWM1/GPIO5 bidirectional PWM (15.259 kHz to 125 MHz) or GPIO.
11 FPWM2/GPIO6 bidirectional PWM (15.259 kHz to 125 MHz) or GPIO.
12 FPWM3/GPIO7 bidirectional PWM (15.259 kHz to 125 MHz) or GPIO.
13 FPWM4/GPIO8 bidirectional PWM (15.259 kHz to 125 MHz) or GPIO.
14 FPWM5/GPIO9 bidirectional PWM (15.259 kHz to 125 MHz) or GPIO.
15 FPWM6/GPIO10 bidirectional PWM (15.259 kHz to 125 MHz) or GPIO.
16 FPWM7/GPIO11 bidirectional PWM (15.259 kHz to 125 MHz) or GPIO.
17 FPWM8/GPIO12 bidirectional PWM (15.259 kHz to 125 MHz) or GPIO.
18 GPIO13 bidirectional General-purpose discrete input-output.
19 PMBus_ALERT output PMBus alert, active-low, open-drain output; must have a pullup to 3.3 V.
20 PMBus_CNTRL input PMBus control input.
21 GPIO14 bidirectional General-purpose discrete input-output.
22 PWM1/GPI1 input PWM (0.93 Hz to 7.8125 MHz) or general-purpose input.
23 PWM2/GPI2 input PWM (0.93 Hz to 7.8125 MHz) or general-purpose input.
24 GPIO15 bidirectional General-purpose discrete input-output.
25 GPIO16 bidirectional General-purpose discrete input-output.
26 GPIO17 bidirectional General-purpose discrete input-output.
27 TCK/GPIO18 bidirectional JTAG test clock or GPIO.
28 TDO/GPIO19 bidirectional JTAG test data out or GPIO.
29 TDI/GPIO20 bidirectional JTAG test data in (tie to Vdd with 10-kΩ resistor) or GPIO.
30 TMS/GPIO21 bidirectional JTAG test mode select (tie to Vdd with 10-kΩ resistor) or GPIO.
31 TRST input JTAG test reset; tie to ground with 10-kΩ resistor.
32 DVSS power_in Digital ground.
33 V33D power_in Digital core 3.3-V supply; refer to the Layout Guidelines section.
34 V33A power_in Analog 3.3-V supply; refer to the Layout Guidelines section.
35 BPCap passive 1.8-V bypass capacitor connection; refer to the Layout Guidelines section.
36 AVSS1 power_in Analog ground.
37 MON11 input Analog input, 0.2 V to 2.5 V.
38 MON3 input Analog monitor input, 0 V to 2.5 V.
39 MON4 input Analog monitor input, 0 V to 2.5 V.
40 MON5 input Analog monitor input, 0 V to 2.5 V.
41 MON6 input Analog monitor input, 0 V to 2.5 V.
42 MON7 input Analog monitor input, 0 V to 2.5 V.
43 PMBus_ADDR1 input PMBus analog address input, most-significant address bit.
44 PMBus_ADDR0 input PMBus analog address input, least-significant address bit.
45 MON8 input Analog monitor input, 0 V to 2.5 V.
46 MON9 input Analog monitor input, 0 V to 2.5 V.
47 AVSS2 power_in Analog ground.
48 MON10 input Analog monitor input, 0 V to 2.5 V.
49 Thermal pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-48-EP(7x7)
Category Power Supply Chip
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at V33D to DVSS -0.3 3.8 V 6
Voltage applied at V33A to AVSS -0.3 3.8 V 6
Voltage applied to any other pin -0.3 V Printed maximum is V33A + 0.3 V (not a numeric value) 6
Storage temperature (Tstg) Tstg -55 150 °C 6
Supply voltage during operation (V33D, V33DIO, V33A) 3 3.3 3.6 V 6
Operating free-air temperature TA -40 110 °C 6
Junction temperature TJ 125 °C 6
Analog input voltage range MON1-MON10 VMON 0 2.5 V MON1-MON10 7
Analog input voltage range MON11 VMON 0.2 2.5 V MON11 7
ADC integral nonlinearity INL -4 4 LSB 7
ADC differential nonlinearity DNL -2 2 LSB 7
Input leakage current Ilkg 100 nA 3 V applied to pin 7
Input offset current IOFFSET -5 5 μA 1-kΩ source impedance 7
Input impedance MON11 RIN 0.5 1.5 3 MΩ MON11, ground reference 7
ADC 2.5 V internal reference accuracy (0°C to 125°C) VREF -0.5 0.5 % 0°C to 125°C 7
ADC 2.5 V internal reference accuracy (-40°C to 125°C) VREF -1 1 % -40°C to 125°C 7
Bias current for PMBus address pins IBIAS 9 11 μA 7
Voltage, shorted PMBus_ADDR pin VADDR_SHORT 0.124 V PMBus_ADDR0, PMBus_ADDR1 short to ground 7
Low-level output voltage VOL 0.25 V IOL = 6 mA, V33DIO = 3 V; printed limit is Dgnd + 0.25 V (numeric offset shown) 7
High-level output voltage VOH 0.6 V IOH = -6 mA, V33DIO = 3 V; printed limit is V33DIO, 0.6 V (numeric offset shown) 7
High-level input voltage VIH 2.1 3.6 V V33DIO = 3 V 7
Low-level input voltage VIL 1.4 V V33DIO = 3.5 V 7
MARGINING-PWM frequency FPWM1-8 TPWM_FREQ 15.26 125000 kHz FPWM1-8 7
MARGINING-PWM frequency PWM1-2 TPWM_FREQ 0.001 7800 kHz PWM1-2 7
MARGINING-PWM duty cycle range DUTYPWM 0 100 % 7
Minimum VDD slew rate VDDSlew 0.25 V/ms VDD slew rate between 2.3 V and 2.9 V 7
Low-pulse duration needed at RESET pin tRESET 2 μS To reset device during normal operation 7
Internal oscillator frequency f(PCLK) 240 250 260 MHz TA = 125°C, TA = 25°C 7
Retention of configuration parameters tretention 100 years TJ = 25°C 7
Number of nonvolatile erase/write cycles Write_Cycles 20 K cycles TJ = 25°C 7
SMBus/PMBus operating frequency FSMB 10 400 kHz Slave mode, SMBC 50% duty cycle; TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
I2C operating frequency FI2C 10 400 kHz Slave mode, SCL 50% duty cycle; TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Bus free time between start and stop t(BUF) 1.3 μs TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Hold time after (repeated) start t(HD:STA) 0.6 μs TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Repeated-start setup time t(SU:STA) 0.6 μs TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Stop setup time t(SU:STO) 0.6 μs TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Data hold time t(HD:DAT) 0 ns Receive mode; TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Data setup time t(SU:DAT) 100 ns TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Error signal/detect timeout t(TIMEOUT) 35 ms See (1) 8
Clock low period t(LOW) 1.3 μs TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Clock high period t(HIGH) 0.6 μs See (2); TA = -40°C to 85°C, 3 V < VDD < 3.6 V 8
Cumulative clock low slave extend time t(LOW:SEXT) 25 ms See (3) 8
Clock/data fall time tf 300 ns See (4); formula printed as 20 + 0.1 Cb 8
Clock/data rise time tr 300 ns See (5); formula printed as 20 + 0.1 Cb 8
Total capacitance of one bus line Cb 400 pF 8
Supply current V33A IV33A 8 mA VV33A = 3.3 V; typical values per note (1) 7
Supply current V33DIO IV33DIO 2 mA VV33DIO = 3.3 V; typical values per note (1) 7
Supply current V33D IV33D 40 mA VV33D = 3.3 V; typical values per note (1) 7
Supply current V33D while storing configuration to flash IV33D 50 mA VV33D = 3.3 V, storing configuration parameters in flash memory 7
Input impedance MON1-MON10 RIN 8 MΩ ground reference 7
Input capacitance CIN 10 pF 7
ADC sample period tCONVERT 400 μs 12 voltages sampled, 3.89 μs/sample 7
Voltage, open PMBus_ADDR pin VADDR_OPEN 2.26 V PMBus_ADDR0, PMBus_ADDR1 open 7
Supply voltage at which device comes out of reset VRESET 2.4 V For power-on reset (POR) 7
Junction-to-ambient thermal resistance RθJA 25 °C/W RGZ (VQFN), 48 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 8.9 °C/W RGZ (VQFN), 48 pins 6
Junction-to-board thermal resistance RθJB 5.5 °C/W RGZ (VQFN), 48 pins 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.7 °C/W RGZ (VQFN), 48 pins 6

CAD (KiCad official)

  • Symbol: UCD9090RGZR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: ucd9090rgzr-etched.step / ucd9090rgzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucd9090rgzr.step / ucd9090rgzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 ace0eb5f3b9549f0, retrieved 2026-10-29, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF