component
UCC5310MCDR
Public Made by Adomby adom
Texas Instruments Isolators - Gate Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 1d ago |
| viewers | 1d ago |
| package.json | 1d ago |
| page.json | 1d ago |
| README.md | 1d ago |
| ucc5310mcdr-etched.glb | 1d ago |
| ucc5310mcdr-etched.step | 1d ago |
| ucc5310mcdr-hero.glb | 1d ago |
| ucc5310mcdr-hero.overlay.json | 1d ago |
| ucc5310mcdr.glb | 1d ago |
| ucc5310mcdr.kicad_mod | 1d ago |
| ucc5310mcdr.kicad_sym | 1d ago |
| ucc5310mcdr.lbr | 1d ago |
| ucc5310mcdr.step | 1d ago |
UCC5310MCDR
Texas Instruments · Isolators - Gate Drivers · SOIC-8
UCC5310MCDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Input-side bias supply, recommended 3 V to 15 V (VCC1 to GND1), with a low-ESR/ESL decoupling capacitor placed as close to the device as possible. |
| 2 | IN+ | input | Non-inverting gate-drive control input with CMOS thresholds (typical high threshold 0.55 × VCC1, low threshold 0.45 × VCC1); it is internally pulled low when left open and must never exceed VCC1. |
| 3 | IN- | input | Inverting gate-drive control input with CMOS thresholds; it is internally pulled high (128 kΩ) when left open, and TI recommends tying it to GND1 or VCC1 if not used. |
| 4 | GND1 | power_in | Input-side ground; all input-side signals are referenced to this pin. |
| 5 | VCC2 | power_in | Positive output-side supply rail, recommended 13.2 V to 33 V (VCC2 to VEE2) for UCC53x0 with a decoupling capacitor connected to VEE2 placed close to the pin. |
| 6 | OUT | output | Gate-drive output of the UCC5310M (single-ended, rail-to-rail between VEE2 and VCC2) that drives the IGBT or MOSFET gate. |
| 7 | CLAMP | input | Active Miller clamp input on the UCC53x0M that sinks Miller current to hold the gate below its turn-on threshold (clamped below 2 V in the off state) and is connected to the power device gate with a low-impedance path to VEE2. |
| 8 | VEE2 | power_in | Negative output supply rail, which is the ground reference for the output stage on S and M versions; decoupling capacitor should be placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC5310MCDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc5310mcdr-etched.step/ucc5310mcdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc5310mcdr.step/ucc5310mcdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
84c7492975118783, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).