main
Ray Publish 0.1.0 5225d60
{
  "slug": "ucc3818n",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments AC-DC Controllers & Regulators, PDIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ucc3818n",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc3818n.kicad_sym",
    "ucc3818n.kicad_mod",
    "ucc3818n.glb",
    "ucc3818n.step",
    "ucc3818n.lbr",
    "docs/hero.png",
    "docs/ucc3818n-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc3818n-hero.glb",
    "ucc3818n-hero.overlay.json",
    "ucc3818n-etched.glb"
  ],
  "component": {
    "mpn": "UCC3818N",
    "manufacturer": "Texas Instruments",
    "package": "PDIP-16",
    "pin_count": 16,
    "category": "Power Supply Chip",
    "subcategory": "AC-DC Controllers & Regulators",
    "datasheet": "https://www.ti.com/lit/ds/slus395k/slus395k.pdf",
    "parts": {
      "symbol": "ucc3818n.kicad_sym",
      "footprint": "ucc3818n.kicad_mod",
      "model_3d": "ucc3818n-hero.glb",
      "model_3d_plain": "ucc3818n-etched.glb",
      "model_3d_step": "ucc3818n-etched.step",
      "model_3d_step_plain": "ucc3818n.step",
      "lbr": "ucc3818n.lbr"
    },
    "distributor_links": {
      "lcsc": "C2872473",
      "digikey": "296-11515-5-ND",
      "mouser": "595-UCC3818N"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T00:59:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-11515-5-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-UCC3818N",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all voltages; VCC and VREF should be bypassed directly to GND with a 0.1-µF or larger ceramic capacitor."
      },
      {
        "number": "2",
        "name": "PKLMT",
        "type": "input",
        "description": "PFC peak current limit with a 0 V threshold, reached when PKLMT falls below 0 V, set by a level-shift divider from the current sense resistor to VREF."
      },
      {
        "number": "3",
        "name": "CAOUT",
        "type": "output",
        "description": "Output of the wide-bandwidth current amplifier that commands the PFC PWM duty cycle, with compensation components placed between CAOUT and MOUT."
      },
      {
        "number": "4",
        "name": "CAI",
        "type": "input",
        "description": "Noninverting input of the current amplifier, connected through a resistor to the GND side of the current sense resistor, and remains functional down to and below GND."
      },
      {
        "number": "5",
        "name": "MOUT",
        "type": "bidirectional",
        "description": "Multiplier output and current amplifier inverting input, with the multiplier output current limited to 2 × IIAC."
      },
      {
        "number": "6",
        "name": "IAC",
        "type": "input",
        "description": "Input to the analog multiplier carrying a current proportional to instantaneous line voltage, with a recommended maximum of 500 µA."
      },
      {
        "number": "7",
        "name": "VAOUT",
        "type": "output",
        "description": "Voltage amplifier output that regulates output voltage, internally limited to approximately 5.5 V to prevent overshoot."
      },
      {
        "number": "8",
        "name": "VFF",
        "type": "input",
        "description": "Feed-forward voltage generated by mirroring 1/2 of IIAC into an external single-pole filter, which should be 1.4 V at low line."
      },
      {
        "number": "9",
        "name": "VREF",
        "type": "power_in",
        "description": "Output of the accurate 7.5-V reference, capable of delivering 20 mA, internally short-circuit current limited, and disabled at 0 V when VCC is below UVLO."
      },
      {
        "number": "10",
        "name": "OVP/EN",
        "type": "input",
        "description": "Window comparator input that disables the output driver if the boost output is a programmed level above nominal, and disables the driver and resets SS if pulled below 1.9 V (typ)."
      },
      {
        "number": "11",
        "name": "VSENSE",
        "type": "input",
        "description": "Voltage amplifier inverting input, normally connected to the compensation network and to the boost output through a divider network."
      },
      {
        "number": "12",
        "name": "RT",
        "type": "input",
        "description": "Oscillator charging-current program pin; a resistor between 10 kΩ and 100 kΩ to GND is recommended, with a nominal pin voltage of 3 V."
      },
      {
        "number": "13",
        "name": "SS",
        "type": "input",
        "description": "Soft-start pin that charges an external capacitor with a current source to slowly increase PWM duty cycle during start-up, and is discharged when VCC is low."
      },
      {
        "number": "14",
        "name": "CT",
        "type": "input",
        "description": "Oscillator timing capacitor to GND setting the PWM frequency per f ≈ 0.6/(RT × CT), with its lead kept as short and direct as possible."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply to be held between 10 V and 17 V for normal operation with at least 20 mA available, with an 18 V absolute maximum rating."
      },
      {
        "number": "16",
        "name": "DRVOUT",
        "type": "output",
        "description": "Totem-pole MOSFET gate drive output for the boost switch, which requires a series gate resistor to limit overshoot when driving a capacitive load."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table (page 3) is shared by the D, DW, N and PW packages. The PDIP (N) 16-pin entry in the o; Pin types are mapped to KiCad classes from the datasheet's I/O column. VCC and GND are set to power_"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0824,
        "at": "2026-10-31T00:58:59"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/slus395k/slus395k.pdf",
        "pages": 46,
        "sha256": "ca94b4ec262a1f44",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc3818n.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc3818n-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c95788544719c25961e47e0df961bf83bc8ba2b07e112b8ad23c8f07977f694c",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}