main
Ray ucc3818adr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) ed5d7f0
{
  "schema_version": 1,
  "type": "component",
  "slug": "ucc3818adr",
  "title": "UCC3818ADR",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc3818adr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UCC3818ADR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc3818a.pdf",
    "parts": {
      "symbol": "ucc3818adr.kicad_sym",
      "footprint": "ucc3818adr.kicad_mod",
      "model_3d": "ucc3818adr-etched.glb",
      "model_3d_plain": "ucc3818adr.glb",
      "model_3d_step": "ucc3818adr-etched.step",
      "model_3d_step_plain": "ucc3818adr.step",
      "lbr": "ucc3818adr.lbr"
    },
    "distributor_links": {
      "lcsc": "C783610"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; all voltages are measured with respect to ground; bypass VCC and VREF to GND with 0.1µF or larger ceramic capacitor."
      },
      {
        "number": "2",
        "name": "PKLMT",
        "type": "input",
        "description": "PFC peak current limit input; threshold for peak limit is 0V; peak current limit reached when PKLMT voltage falls below 0V."
      },
      {
        "number": "3",
        "name": "CAOUT",
        "type": "output",
        "description": "Output of wide bandwidth current amplifier that senses line current and commands the PWM to force correct duty cycle; compensation components placed between CAOUT and MOUT."
      },
      {
        "number": "4",
        "name": "CAI",
        "type": "input",
        "description": "Current amplifier noninverting input; place resistor between this pin and the GND side of current sense resistor; input remains functional below GND."
      },
      {
        "number": "5",
        "name": "MOUT",
        "type": "bidirectional",
        "description": "Output of analog multiplier and inverting input of current amplifier; high-impedance input for differential amplifier configuration; multiplier output current limited to 2×IAC."
      },
      {
        "number": "6",
        "name": "IAC",
        "type": "input",
        "description": "Analog multiplier input representing instantaneous rectified line voltage; current proportional to input voltage; recommended maximum current is 500µA."
      },
      {
        "number": "7",
        "name": "VAOUT",
        "type": "output",
        "description": "Output of voltage amplifier that regulates output voltage; internally limited to approximately 5.5V to prevent overshoot."
      },
      {
        "number": "8",
        "name": "VFF",
        "type": "input",
        "description": "Feed-forward voltage input; RMS voltage signal generated by mirroring 1/2 of IAC into single pole external filter; at low line should be 1.4V."
      },
      {
        "number": "9",
        "name": "VREF",
        "type": "power_out",
        "description": "Accurate 7.5V voltage reference output capable of delivering 20mA to peripheral circuitry; internally short-circuit limited; disabled and remains at 0V when VCC below UVLO threshold."
      },
      {
        "number": "10",
        "name": "OVP/EN",
        "type": "input",
        "description": "Window comparator input for overvoltage protection and enable function; disables output driver if boost output voltage exceeds programmed level; resets soft-start if pulled below 1.9V typical."
      },
      {
        "number": "11",
        "name": "VSENSE",
        "type": "input",
        "description": "Voltage amplifier inverting input; normally connected to compensation network and boost converter output through resistor divider network."
      },
      {
        "number": "12",
        "name": "RT",
        "type": "input",
        "description": "Oscillator charging current input; resistor from RT to GND programs oscillator charging current and frequency; TI recommends 10kΩ to 100kΩ; nominal voltage 3V."
      },
      {
        "number": "13",
        "name": "SS",
        "type": "input",
        "description": "Soft-start input; external capacitor charged to slowly increase PWM duty cycle during start-up enabling voltage amplifier output to increase gradually; discharged for VCC low conditions."
      },
      {
        "number": "14",
        "name": "CT",
        "type": "input",
        "description": "Oscillator timing capacitor input; capacitor from CT to GND sets PWM oscillator frequency; lead should be short and direct to GND."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage input; connect to stable source of at least 20mA from 10V to 17V for normal operation; bypass to GND with 0.1µF or larger ceramic capacitor."
      },
      {
        "number": "16",
        "name": "DRVOUT",
        "type": "output",
        "description": "Gate drive output for boost switch; totem-pole MOSFET gate driver with ±1.2A peak current capability; series gate current-limiting resistor recommended to prevent overshoot on capacitive loads."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 11 labeled as 'SSENSE' in Pin Configuration table (PAGE 4), but consistently referred to as 'VSE"
        ],
        "pages_sent": 39,
        "cost_usd": 0.4231,
        "at": "2026-09-23T15:06:27"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc3818a.pdf",
        "pages": 39,
        "sha256": "bd38dec546e1e7ad",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc3818adr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc3818adr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "bc070c9b63a5d72e66098fd53cdcc508bfcf85731542ea8dbe8c7506a65bbafc",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-16",
      "Category": "Power Management (PMIC)",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ucc3818adr"
  ],
  "discovery_pitch": "UCC3818ADR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc3818adr.kicad_sym",
    "ucc3818adr.kicad_mod",
    "ucc3818adr.glb",
    "ucc3818adr.step",
    "ucc3818adr.lbr",
    "docs/hero.png",
    "docs/ucc3818adr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T13:40:34.216Z"
}