component
UCC3818ADR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
ucc3818adr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -53,7 +53,7 @@ "number": "1", "name": "GND", "type": "power_in",- "description": "Ground connection; all voltages are measured with respect to ground; bypass VCC and VREF to GND with 0.1\u00b5F or larger ceramic capacitor."+ "description": "Ground connection; all voltages are measured with respect to ground; bypass VCC and VREF to GND with 0.1µF or larger ceramic capacitor." }, { "number": "2",@@ -77,13 +77,13 @@ "number": "5", "name": "MOUT", "type": "bidirectional",- "description": "Output of analog multiplier and inverting input of current amplifier; high-impedance input for differential amplifier configuration; multiplier output current limited to 2\u00d7IAC."+ "description": "Output of analog multiplier and inverting input of current amplifier; high-impedance input for differential amplifier configuration; multiplier output current limited to 2×IAC." }, { "number": "6", "name": "IAC", "type": "input",- "description": "Analog multiplier input representing instantaneous rectified line voltage; current proportional to input voltage; recommended maximum current is 500\u00b5A."+ "description": "Analog multiplier input representing instantaneous rectified line voltage; current proportional to input voltage; recommended maximum current is 500µA." }, { "number": "7",@@ -119,7 +119,7 @@ "number": "12", "name": "RT", "type": "input",- "description": "Oscillator charging current input; resistor from RT to GND programs oscillator charging current and frequency; TI recommends 10k\u03a9 to 100k\u03a9; nominal voltage 3V."+ "description": "Oscillator charging current input; resistor from RT to GND programs oscillator charging current and frequency; TI recommends 10kΩ to 100kΩ; nominal voltage 3V." }, { "number": "13",@@ -137,13 +137,13 @@ "number": "15", "name": "VCC", "type": "power_in",- "description": "Positive supply voltage input; connect to stable source of at least 20mA from 10V to 17V for normal operation; bypass to GND with 0.1\u00b5F or larger ceramic capacitor."+ "description": "Positive supply voltage input; connect to stable source of at least 20mA from 10V to 17V for normal operation; bypass to GND with 0.1µF or larger ceramic capacitor." }, { "number": "16", "name": "DRVOUT", "type": "output",- "description": "Gate drive output for boost switch; totem-pole MOSFET gate driver with \u00b11.2A peak current capability; series gate current-limiting resistor recommended to prevent overshoot on capacitive loads."+ "description": "Gate drive output for boost switch; totem-pole MOSFET gate driver with ±1.2A peak current capability; series gate current-limiting resistor recommended to prevent overshoot on capacitive loads." } ], "provenance": {@@ -180,6 +180,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ucc3818adr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ucc3818adr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "bc070c9b63a5d72e66098fd53cdcc508bfcf85731542ea8dbe8c7506a65bbafc",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -165,7 +165,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ucc3818adr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ucc3818adr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "bc070c9b63a5d72e66098fd53cdcc508bfcf85731542ea8dbe8c7506a65bbafc",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -213,4 +253,4 @@ "public": true }, "updated_at": "2026-09-25T13:40:34.216Z"-}+}