UCC38084DR

{
  "slug": "ucc38084dr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc38084dr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc38084dr.kicad_sym",
    "ucc38084dr.kicad_mod",
    "ucc38084dr.glb",
    "ucc38084dr.step",
    "ucc38084dr.lbr",
    "docs/hero.png",
    "docs/ucc38084dr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc38084dr-hero.glb",
    "ucc38084dr-hero.overlay.json"
  ],
  "component": {
    "mpn": "UCC38084DR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc38084.pdf",
    "parts": {
      "symbol": "ucc38084dr.kicad_sym",
      "footprint": "ucc38084dr.kicad_mod",
      "model_3d": "ucc38084dr-hero.glb",
      "model_3d_plain": "ucc38084dr.glb",
      "model_3d_step": "ucc38084dr-etched.step",
      "model_3d_step_plain": "ucc38084dr.step",
      "lbr": "ucc38084dr.lbr"
    },
    "distributor_links": {
      "lcsc": "C702441",
      "digikey": "296-UCC38084DRTR-ND",
      "mouser": "595-UCC38084DR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T15:14:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-UCC38084DRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-UCC38084DR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CTRL",
        "type": "input",
        "description": "Error voltage input to the PWM comparator, typically driven from a secondary-side error amplifier through an opto-coupler, with an internal divider ratio of 0.45 to keep a usable range at the minimum VDD of 4.1 V."
      },
      {
        "number": "2",
        "name": "ISET",
        "type": "input",
        "description": "Slope compensation current select pin, where a resistor RSET from ISET to ground sets the ramp so that IRAMP,peak = 5 x ISET,peak."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current-sense input to the PWM comparator, cycle-by-cycle peak current comparator and overcurrent comparator, where exceeding the overcurrent threshold (0.70 V to 0.80 V) causes a soft-start cycle and an internal MOSFET discharges the CS filter capacitor."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "input",
        "description": "Oscillator programming pin, where an external resistor from RT to GND sets the oscillator frequency with a nominal RT voltage of 1.5 V (1.2 V to 1.6 V) and a recommended timing resistor range of 25 kΩ to 698 kΩ."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Reference ground and power ground for all functions, and a low-impedance circuit board ground plane is highly recommended because of high currents and high-frequency operation."
      },
      {
        "number": "6",
        "name": "OUTB",
        "type": "output",
        "description": "Alternating high-current push-pull output stage, capable of 500 mA peak source and 1 A peak sink for driving a power MOSFET gate, switching at half the oscillator frequency."
      },
      {
        "number": "7",
        "name": "OUTA",
        "type": "output",
        "description": "Alternating high-current push-pull output stage, capable of 500 mA peak source and 1 A peak sink for driving a power MOSFET gate, switching at half the oscillator frequency."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Power input connection with an absolute maximum of 15 V (IDD < 10 mA), where a 1-µF ceramic decoupling capacitor placed close to the chip to GND is recommended."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 15,
        "cost_usd": 0.0737,
        "at": "2026-10-11T15:14:24"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc38084.pdf",
        "pages": 28,
        "sha256": "19bab60962d5c6f5",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc38084dr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc38084dr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a0f009749730a82a0307b35bb2b303df931aea3f645b84ab1a7cb95a54f1a153",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}