component

UCC28C52DR

Public Made by Adom

by adom

Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)ucc28c52drfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 7h ago
viewers ucc28c52dr: viewers · Ray 7h ago
package.json Publish 0.1.0 · Ray 7h ago
page.json Set visibility: public · Ray 7h ago
README.md Publish 0.1.0 · Ray 7h ago
ucc28c52dr-etched.glb Publish 0.1.0 · Ray 7h ago
ucc28c52dr-etched.step ucc28c52dr: factory component page (tier=mfr) · Ray 7h ago
ucc28c52dr-hero.glb ucc28c52dr: hero GLB from the etched model (keeps the MPN mark) · Ray 7h ago
ucc28c52dr-hero.overlay.json Publish 0.1.0 · Ray 7h ago
ucc28c52dr.glb Publish 0.1.0 · Ray 7h ago
ucc28c52dr.kicad_mod Publish 0.1.0 · Ray 7h ago
ucc28c52dr.kicad_sym Publish 0.1.0 · Ray 7h ago
ucc28c52dr.lbr Publish 0.1.0 · Ray 7h ago
ucc28c52dr.step Publish 0.1.0 · Ray 7h ago

UCC28C52DR

Texas Instruments · DC-DC Converters · SOIC-8

UCC28C52DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Error amplifier output for compensation, internally current limited so zero duty cycle can be commanded by forcing COMP to GND.
2 FB input Inverting input of the error amplifier whose noninverting input is internally trimmed to 2.5 V ± 1%, used for the voltage-feedback loop.
3 CS input Primary-side current sense input to the PWM comparator, connected to the current sensing resistor, with a typical gain of 3 V/V.
4 RT/CT bidirectional Fixed-frequency oscillator set point, with timing resistor to VREF and timing capacitor to GND setting the switching frequency.
5 GND power_in Ground return pin for the output driver stage and the logic level controller section.
6 OUT output On-chip gate drive output sourcing and sinking up to 1 A peak, at oscillator frequency and near 100% duty cycle on the UCC28C52, and actively held low when VDD is below the turn-on threshold.
7 VDD power_in Analog controller bias input with 30 V absolute maximum, requiring a 0.1 µF bypass capacitor to GND.
8 VREF power_out 5-V reference output (±1%) that charges the timing capacitor through the timing resistor, requiring at least a 0.1 µF ceramic bypass to GND and 55 mA maximum short-circuit current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VREF voltage, initial accuracy VVREF 4.95 5 5.05 V TJ = 25°C, IOUT = 1 mA 7
VREF total output variation 4.85 5.15 V 7
VREF output short circuit current IVREF 30 45 55 mA Output short circuit (source current) 7
Oscillator initial accuracy fOSC 50.5 53 55 kHz TJ = 25°C 7
Feedback input voltage, initial accuracy VFB 2.475 2.5 2.525 V VCOMP = 2.5 V, TJ = 25°C 7
Feedback input voltage, total variation VFB 2.45 2.5 2.55 V VCOMP = 2.5 V 7
Current sense gain ACS 2.85 3 3.15 V/V 7
Current sense maximum input signal VCS 0.9 1 1.1 V VFB < 2.4 V 7
Start threshold VDDON 13.5 14.5 15.5 V UCCx8C52 8
Minimum operating voltage VDDOFF 8 9 10 V UCCx8C52 8
Maximum duty cycle DMAX 94 96 % VFB < 2.4 V 8
Start-up current ISTART-UP 50 75 µA VVDD = VDDON, 0.5 V 8
Operating supply current IVDD 1.3 2 mA VFB = VCS = 0 V 8
Input voltage VDD 30 V 5
Input current IVDD 30 mA 5
Output drive current (peak) -1 1 A 5
Output energy (capacitive load) EOUT 5 µJ 5
Analog input voltage -0.3 6.3 V COMP, CS, FB, RT/CT 5
Output driver voltage OUT -0.3 30 V OUT 5
Reference voltage VREF 7 V 5
Error amplifier output sink current 10 mA COMP 5
Lead temperature TLEAD 300 °C soldering, 10 s 5
Operating junction temperature TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
Input voltage VVDD 28 V 6
Output driver voltage VOUT 28 V 6
Average output driver current IOUT 200 mA 6
Reference output current IOUT(VREF) -20 mA 6
Operating junction temperature TJ -40 125 °C UCC28C5x 6
Junction-to-ambient thermal resistance RθJA 128.9 °C/W D (SOIC) 8 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 71.7 °C/W D (SOIC) 6
Junction-to-board thermal resistance RθJB 72.3 °C/W D (SOIC) 6
Junction-to-top characterization parameter ψJT 23.4 °C/W D (SOIC) 6
Junction-to-board characterization parameter ψJB 71.5 °C/W D (SOIC) 6
HBM ESD V(ESD) -2500 2500 V Human-body model 6
CDM ESD V(ESD) -1500 1500 V Charged-device model 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin The inductor rising slope (Sn) at the CS pin is calculated with Equation 34. Sn = 34

CAD (KiCad official)

  • Symbol: UCC28C52DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc28c52dr-etched.step / ucc28c52dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28c52dr.step / ucc28c52dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 d9b2cab289f0aa82, retrieved 2026-10-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF