main
Ray
Publish 0.1.0
b9f1a8e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254
{
"slug": "ucc28c45dgkr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments AC-DC Controllers And Regulators, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"ucc28c45dgkr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ucc28c45dgkr.kicad_sym",
"ucc28c45dgkr.kicad_mod",
"ucc28c45dgkr.glb",
"ucc28c45dgkr.step",
"ucc28c45dgkr.lbr",
"docs/hero.png",
"docs/ucc28c45dgkr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ucc28c45dgkr-hero.glb",
"ucc28c45dgkr-hero.overlay.json",
"ucc28c45dgkr-etched.glb"
],
"component": {
"mpn": "UCC28C45DGKR",
"manufacturer": "Texas Instruments",
"package": "VSSOP-8",
"pin_count": 8,
"category": "Power Management (PMIC)",
"subcategory": "AC-DC Controllers And Regulators",
"datasheet": "https://www.ti.com/lit/ds/symlink/ucc28c45.pdf",
"parts": {
"symbol": "ucc28c45dgkr.kicad_sym",
"footprint": "ucc28c45dgkr.kicad_mod",
"model_3d": "ucc28c45dgkr-hero.glb",
"model_3d_plain": "ucc28c45dgkr-etched.glb",
"model_3d_step": "ucc28c45dgkr-etched.step",
"model_3d_step_plain": "ucc28c45dgkr.step",
"lbr": "ucc28c45dgkr.lbr"
},
"distributor_links": {
"lcsc": "C702437",
"digikey": "296-50462-2-ND",
"mouser": "595-UCC28C45DGKR"
},
"distributor_check": {
"checked_at": "2026-11-11T01:54:00Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-50462-2-ND",
"status": "found"
},
"mouser": {
"pn": "595-UCC28C45DGKR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "COMP",
"type": "output",
"description": "Error amplifier output for compensation, internally current limited so zero duty cycle is commanded by forcing COMP to GND, with an absolute maximum error amplifier output sink current of 10 mA."
},
{
"number": "2",
"name": "FB",
"type": "input",
"description": "Inverting input of the error amplifier used for voltage-feedback loop stability, with the noninverting input internally trimmed to 2.5 V ±1%."
},
{
"number": "3",
"name": "CS",
"type": "input",
"description": "Primary-side current sense input to the PWM comparator, where the maximum input signal is 1 V typical (0.9 V minimum, 1.1 V maximum) and the absolute maximum analog input range is -0.3 V to 6.3 V."
},
{
"number": "4",
"name": "RT/CT",
"type": "bidirectional",
"description": "Oscillator set point, with timing resistor RRT connected to VREF and timing capacitor CCT connected to GND; the absolute maximum analog input voltage is -0.3 V to 6.3 V."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground return for the output driver stage and the logic-level controller section; all device voltages are referenced to this pin."
},
{
"number": "6",
"name": "OUT",
"type": "output",
"description": "Totem-pole gate drive output for directly driving a MOSFET, sourcing and sinking up to ±1 A peak, with an absolute maximum output driver voltage of 20 V, and held low when VDD is below the turn-on threshold."
},
{
"number": "7",
"name": "VDD",
"type": "power_in",
"description": "Analog controller bias input with an absolute maximum of 20 V and a recommended input voltage of 18 V, requiring a ceramic bypass of at least 0.1 µF to GND located close to the pin."
},
{
"number": "8",
"name": "VREF",
"type": "power_out",
"description": "5 V reference output that must be bypassed to GND with a ceramic capacitor of at least 0.1 µF placed as close to the pin as possible, with a short-circuit source current of 30 to 55 mA and a recommended output current of up to 20 mA."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pinout taken from the DGK (VSSOP-8) top view in Figure 5-2 and Table 5-1 on page 4; the datasheet st; Table 5-1 classifies VDD as 'I' and VREF as 'O'; mapped here to KiCad power_in (VDD) and power_out (; RT/CT is marked 'I/O' in Table 5-1 and mapped to bidirectional accordingly."
],
"pages_sent": 60,
"cost_usd": 0.0153,
"at": "2026-11-11T01:53:42"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ucc28c45.pdf",
"pages": 60,
"sha256": "737b5e05fe02b31b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "HVSSOP",
"height_mm": 1.1,
"height_basis": "datasheet A, max",
"standoff_mm": 0.1,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.292,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.65 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.128,
"lead_thickness_basis": "default for pitch 0.65 mm, height 1.1 mm (no datasheet c read)"
},
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ucc28c45dgkr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
1.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3a6225645ac7e61194309e9929671825310be4418ff9df64694de6664126d6a2",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ucc28c45dgkr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
1.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "cf7e7a7b9e9f8be7966c0b3928b652ba824be4d97698bd3ec28c59b374583e57",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DGK0008A",
"source_page": 53,
"D": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E": {
"nom_mm": 4.9,
"range_mm": [
4.75,
5.05
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.1,
"range_mm": [
null,
1.1
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ucc28c45dgkr.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}