main
Ray
ucc28c40dgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
ad00a22
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175
{
"slug": "ucc28c40dgkr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments DC-DC Converters, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"ucc28c40dgkr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ucc28c40dgkr.kicad_sym",
"ucc28c40dgkr.kicad_mod",
"ucc28c40dgkr.glb",
"ucc28c40dgkr.step",
"ucc28c40dgkr.lbr",
"docs/hero.png",
"docs/ucc28c40dgkr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "UCC28C40DGKR",
"manufacturer": "Texas Instruments",
"package": "VSSOP-8",
"pin_count": 8,
"category": "Power Management (PMIC)",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/lit/ds/symlink/ucc28c40.pdf",
"parts": {
"symbol": "ucc28c40dgkr.kicad_sym",
"footprint": "ucc28c40dgkr.kicad_mod",
"model_3d": "ucc28c40dgkr-etched.glb",
"model_3d_plain": "ucc28c40dgkr.glb",
"model_3d_step": "ucc28c40dgkr-etched.step",
"model_3d_step_plain": "ucc28c40dgkr.step",
"lbr": "ucc28c40dgkr.lbr"
},
"distributor_links": {
"lcsc": "C2657923"
},
"pins": [
{
"number": "1",
"name": "COMP",
"type": "output",
"description": "Error amplifier output for compensation; internally current-limited to sink 10mA maximum; can command zero duty cycle by forcing to GND."
},
{
"number": "2",
"name": "FB",
"type": "input",
"description": "Inverting input to error amplifier for voltage-feedback loop control; internal noninverting reference trimmed to 2.5V ± 1%."
},
{
"number": "3",
"name": "CS",
"type": "input",
"description": "Primary-side current sense input to PWM comparator with 3V/V gain; maximum threshold 0.9V to 1.1V (typical 1V); connect to current sensing resistor."
},
{
"number": "4",
"name": "RT/CT",
"type": "bidirectional",
"description": "Fixed frequency oscillator set point; connect timing resistor (RRT) to VREF and timing capacitor (CCT) to GND to program switching frequency from 1kHz to 1MHz."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground return for output driver stage and logic level controller section; separate signal and high-current return paths."
},
{
"number": "6",
"name": "OUT",
"type": "output",
"description": "On-chip drive stage output for direct MOSFET gate driving; sources and sinks ±1A peak current; actively held low when VDD is below turn-on threshold."
},
{
"number": "7",
"name": "VDD",
"type": "power_in",
"description": "Analog controller power supply input with absolute maximum 20V; requires 0.1µF bypass capacitor directly to GND with minimal trace length."
},
{
"number": "8",
"name": "VREF",
"type": "power_out",
"description": "5V reference output (±1% initial accuracy, ±2% over temperature -40°C to 125°C); provides oscillator charging current; requires 0.1µF ceramic bypass to GND."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 60,
"cost_usd": 0.6029,
"at": "2026-09-22T21:49:19"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ucc28c40.pdf",
"pages": 60,
"sha256": "9fa55f996731c56b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ucc28c40dgkr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.1,
2.0,
0.85
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ucc28c40dgkr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.1,
2.0,
0.85
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b288928d60cdfe15163ef5729ba7aeb48b54309d87719aa6b699973da2eb98a5",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}