main
Ray ucc2895dwtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 75e8931
{
  "slug": "ucc2895dwtr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments AC-DC Controllers & Regulators, SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ucc2895dwtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc2895dwtr.kicad_sym",
    "ucc2895dwtr.kicad_mod",
    "ucc2895dwtr.glb",
    "ucc2895dwtr.step",
    "ucc2895dwtr.lbr",
    "docs/hero.png",
    "docs/ucc2895dwtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "UCC2895DWTR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-20-300mil",
    "pin_count": 20,
    "category": "Power Supply Chip",
    "subcategory": "AC-DC Controllers & Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc2895",
    "parts": {
      "symbol": "ucc2895dwtr.kicad_sym",
      "footprint": "ucc2895dwtr.kicad_mod",
      "model_3d": "ucc2895dwtr-etched.glb",
      "model_3d_plain": "ucc2895dwtr.glb",
      "model_3d_step": "ucc2895dwtr-etched.step",
      "model_3d_step_plain": "ucc2895dwtr.step",
      "lbr": "ucc2895dwtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C527702"
    },
    "pins": [
      {
        "number": "1",
        "name": "EAN",
        "type": "input",
        "description": "Inverting input to the error amplifier; keep below 3.6 V for proper operation."
      },
      {
        "number": "2",
        "name": "EAOUT",
        "type": "bidirectional",
        "description": "Error amplifier output; internally connected to the non-inverting input of the PWM comparator and no-load comparator, internally clamped to soft-start voltage."
      },
      {
        "number": "3",
        "name": "RAMP",
        "type": "input",
        "description": "Inverting input of the PWM comparator; receives either the CT waveform in voltage and average current-mode control, or current signal plus slope compensation in peak current-mode control."
      },
      {
        "number": "4",
        "name": "REF",
        "type": "power_out",
        "description": "5-V ±1.2% precision voltage reference supplying up to 5 mA to external loads; bypass with 0.1 μF low ESR low ESL capacitor to ground, do not use more than 4.7 μF total capacitance."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground for all circuits except the output stages."
      },
      {
        "number": "6",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Oscillator synchronization pin; bidirectional, can be used as output clock or input to override internal oscillator for synchronization of multiple power supplies."
      },
      {
        "number": "7",
        "name": "CT",
        "type": "input",
        "description": "Oscillator timing capacitor for programming the switching frequency; the UCC2895 oscillator charges CT via programmed current, range 100 to 880 pF."
      },
      {
        "number": "8",
        "name": "RT",
        "type": "input",
        "description": "Oscillator timing resistor for programming the switching frequency; current programmed by RT, range 40 kΩ to 120 kΩ."
      },
      {
        "number": "9",
        "name": "DELAB",
        "type": "input",
        "description": "Delay-programming between complementary-outputs pin; programs the dead time between switching of output A and output B."
      },
      {
        "number": "10",
        "name": "DELCD",
        "type": "input",
        "description": "Delay-programming between complementary-outputs pin; programs the dead time between switching of output C and output D."
      },
      {
        "number": "11",
        "name": "ADS",
        "type": "input",
        "description": "Adaptive-delay-set pin; sets the ratio between maximum and minimum programmed output delay dead time, must be limited to 0 V to 2.5 V and less than or equal to CS."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "Current sense input for cycle-by-cycle current limiting and over-current comparator; connects to inverting input of current-sense comparator and non-inverting input of overcurrent comparator."
      },
      {
        "number": "13",
        "name": "OUTD",
        "type": "output",
        "description": "Complementary MOS driver output, 100 mA rated; one of four outputs optimized to drive FET driver circuits or gate drive transformers."
      },
      {
        "number": "14",
        "name": "OUTC",
        "type": "output",
        "description": "Complementary MOS driver output, 100 mA rated; phase shifted with respect to OUTA, drives second half-bridge circuit."
      },
      {
        "number": "15",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input pin; must be bypassed with minimum 1 μF low ESR low ESL capacitor to ground, addition of 10 μF low ESR low ESL between VDD and PGND recommended, operating range 10 to 16.5 V."
      },
      {
        "number": "16",
        "name": "PGND",
        "type": "power_in",
        "description": "Output stage ground connection for high-current output stages; must be electrically tied to GND, board traces must be low impedance."
      },
      {
        "number": "17",
        "name": "OUTB",
        "type": "output",
        "description": "Complementary MOS driver output, 100 mA rated; fully complementary with OUTA at nominal 50% duty cycle, intended to drive one half-bridge circuit."
      },
      {
        "number": "18",
        "name": "OUTA",
        "type": "output",
        "description": "Complementary MOS driver output, 100 mA rated; one of four outputs optimized to drive FET driver circuits or gate drive transformers."
      },
      {
        "number": "19",
        "name": "SS/DISB",
        "type": "input",
        "description": "Soft-start and disable pin combining two independent functions; controls soft-start time and chip enable/disable, sources/sinks current set by IRT."
      },
      {
        "number": "20",
        "name": "EAP",
        "type": "input",
        "description": "Non-inverting input to the error amplifier; keep below 3.6 V for proper operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 61,
        "cost_usd": 0.4156,
        "at": "2026-09-22T07:31:49"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ucc2895",
        "pages": 61,
        "sha256": "839591a78c6304d9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc2895dwtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc2895dwtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "93048e9dbbb97b056dcfe6700d3d91ebe910b8017ff26913ad7a89f48f6dec90",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}