main
Ray ucc28950pwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 81f370f
{
  "slug": "ucc28950pwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc28950pwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc28950pwr.kicad_sym",
    "ucc28950pwr.kicad_mod",
    "ucc28950pwr.glb",
    "ucc28950pwr.step",
    "ucc28950pwr.lbr",
    "docs/hero.png",
    "docs/ucc28950pwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "UCC28950PWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-24",
    "pin_count": 24,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28950.pdf",
    "parts": {
      "symbol": "ucc28950pwr.kicad_sym",
      "footprint": "ucc28950pwr.kicad_mod",
      "model_3d": "ucc28950pwr-etched.glb",
      "model_3d_plain": "ucc28950pwr.glb",
      "model_3d_step": "ucc28950pwr-etched.step",
      "model_3d_step_plain": "ucc28950pwr.step",
      "lbr": "ucc28950pwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C91312"
    },
    "pins": [
      {
        "number": "1",
        "name": "VREF",
        "type": "power_in",
        "description": "5V reference voltage output with ±1.5% accuracy and 20mA maximum output current."
      },
      {
        "number": "2",
        "name": "EA+",
        "type": "input",
        "description": "Error amplifier noninverting input with common-mode input range from 0.5V to 3.6V."
      },
      {
        "number": "3",
        "name": "EA–",
        "type": "input",
        "description": "Error amplifier inverting input with common-mode input range from 0.5V to 3.6V."
      },
      {
        "number": "4",
        "name": "COMP",
        "type": "bidirectional",
        "description": "Error amplifier output and input to PWM comparator with output range 0.25V to 4.25V."
      },
      {
        "number": "5",
        "name": "SS/EN",
        "type": "input",
        "description": "Soft-start programming and device enable input with shutdown threshold at 0.55V and pullup threshold at 3.7V typical."
      },
      {
        "number": "6",
        "name": "DELAB",
        "type": "input",
        "description": "Dead-time programming input for delay between OUTA and OUTB gate drive outputs through external resistor to GND."
      },
      {
        "number": "7",
        "name": "DELCD",
        "type": "input",
        "description": "Dead-time programming input for delay between OUTC and OUTD gate drive outputs through external resistor to GND."
      },
      {
        "number": "8",
        "name": "DELEF",
        "type": "input",
        "description": "Delay-time programming input between primary side OUTA/OUTB and secondary side OUTE/OUTF through external resistor to GND."
      },
      {
        "number": "9",
        "name": "TMIN",
        "type": "input",
        "description": "Minimum pulse width programming for burst mode operation through external resistor to GND, typical range 100ns to 800ns."
      },
      {
        "number": "10",
        "name": "RT",
        "type": "input",
        "description": "Oscillator frequency setting and mode configuration; connect to VREF for leader mode or to GND for follower mode operation."
      },
      {
        "number": "11",
        "name": "RSUM",
        "type": "input",
        "description": "Slope compensation programming for peak-current mode or voltage-mode control through external resistor to GND or VREF."
      },
      {
        "number": "12",
        "name": "DCM",
        "type": "input",
        "description": "Discontinuous conduction mode threshold setting through resistor divider to enable synchronous rectifier disable at light load."
      },
      {
        "number": "13",
        "name": "ADELEF",
        "type": "input",
        "description": "Adaptive delay-time programming between primary and secondary side switches through resistor divider to CS/GND."
      },
      {
        "number": "14",
        "name": "ADEL",
        "type": "input",
        "description": "Adaptive dead-time programming for primary switches varying with load current through resistor divider to CS/GND."
      },
      {
        "number": "15",
        "name": "CS",
        "type": "input",
        "description": "Current sense input for cycle-by-cycle overcurrent protection with 2.0V ±3% threshold and adaptive delay functions."
      },
      {
        "number": "16",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Synchronization output from leader controller providing 0.5 duty-cycle pulses or input from leader for follower phase synchronization."
      },
      {
        "number": "17",
        "name": "OUTF",
        "type": "output",
        "description": "Secondary synchronous rectifier gate drive output with 0.2A sink and source capability and amplitude equal to VDD."
      },
      {
        "number": "18",
        "name": "OUTE",
        "type": "output",
        "description": "Secondary synchronous rectifier gate drive output with 0.2A sink and source capability and amplitude equal to VDD."
      },
      {
        "number": "19",
        "name": "OUTD",
        "type": "output",
        "description": "Primary full-bridge gate drive output with 0.2A sink and source capability for complementary switch QD."
      },
      {
        "number": "20",
        "name": "OUTC",
        "type": "output",
        "description": "Primary full-bridge gate drive output with 0.2A sink and source capability for complementary switch QC."
      },
      {
        "number": "21",
        "name": "OUTB",
        "type": "output",
        "description": "Primary full-bridge gate drive output with 0.2A sink and source capability for low-side switch QB."
      },
      {
        "number": "22",
        "name": "OUTA",
        "type": "output",
        "description": "Primary full-bridge gate drive output with 0.2A sink and source capability for high-side switch QA."
      },
      {
        "number": "23",
        "name": "VDD",
        "type": "power_in",
        "description": "Bias supply input in range 8V to 17V requiring 1μF ceramic bypass capacitor with low ESR and ESL."
      },
      {
        "number": "24",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference node for all signals and power return with recommended separate quiet analog plane connection."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Output pins OUTA through OUTF have dual capability as both source and sink with 0.2A peak current ea; COMP and SYNC pins are bidirectional; COMP operates as error amplifier output when used in feedback ; External resistor and capacitor networks are required on programming pins (DELAB, DELCD, DELEF, TMIN"
        ],
        "pages_sent": 80,
        "cost_usd": 0.6323,
        "at": "2026-09-24T09:27:36"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc28950.pdf",
        "pages": 80,
        "sha256": "a765d09f25ef27f8",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc28950pwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc28950pwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2b76d0c0e9f3a77a6e3366e886717c4c5e8f2e08c9dab04c9a0e6129aa3f11ea",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}