3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownUCC28950PWR
Texas Instruments · DC-DC Converters · TSSOP-24
UCC28950PWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF | power_in | 5V reference voltage output with ±1.5% accuracy and 20mA maximum output current. |
| 2 | EA+ | input | Error amplifier noninverting input with common-mode input range from 0.5V to 3.6V. |
| 3 | EA- | input | Error amplifier inverting input with common-mode input range from 0.5V to 3.6V. |
| 4 | COMP | bidirectional | Error amplifier output and input to PWM comparator with output range 0.25V to 4.25V. |
| 5 | SS/EN | input | Soft-start programming and device enable input with shutdown threshold at 0.55V and pullup threshold at 3.7V typical. |
| 6 | DELAB | input | Dead-time programming input for delay between OUTA and OUTB gate drive outputs through external resistor to GND. |
| 7 | DELCD | input | Dead-time programming input for delay between OUTC and OUTD gate drive outputs through external resistor to GND. |
| 8 | DELEF | input | Delay-time programming input between primary side OUTA/OUTB and secondary side OUTE/OUTF through external resistor to GND. |
| 9 | TMIN | input | Minimum pulse width programming for burst mode operation through external resistor to GND, typical range 100ns to 800ns. |
| 10 | RT | input | Oscillator frequency setting and mode configuration; connect to VREF for leader mode or to GND for follower mode operation. |
| 11 | RSUM | input | Slope compensation programming for peak-current mode or voltage-mode control through external resistor to GND or VREF. |
| 12 | DCM | input | Discontinuous conduction mode threshold setting through resistor divider to enable synchronous rectifier disable at light load. |
| 13 | ADELEF | input | Adaptive delay-time programming between primary and secondary side switches through resistor divider to CS/GND. |
| 14 | ADEL | input | Adaptive dead-time programming for primary switches varying with load current through resistor divider to CS/GND. |
| 15 | CS | input | Current sense input for cycle-by-cycle overcurrent protection with 2.0V ±3% threshold and adaptive delay functions. |
| 16 | SYNC | bidirectional | Synchronization output from leader controller providing 0.5 duty-cycle pulses or input from leader for follower phase synchronization. |
| 17 | OUTF | output | Secondary synchronous rectifier gate drive output with 0.2A sink and source capability and amplitude equal to VDD. |
| 18 | OUTE | output | Secondary synchronous rectifier gate drive output with 0.2A sink and source capability and amplitude equal to VDD. |
| 19 | OUTD | output | Primary full-bridge gate drive output with 0.2A sink and source capability for complementary switch QD. |
| 20 | OUTC | output | Primary full-bridge gate drive output with 0.2A sink and source capability for complementary switch QC. |
| 21 | OUTB | output | Primary full-bridge gate drive output with 0.2A sink and source capability for low-side switch QB. |
| 22 | OUTA | output | Primary full-bridge gate drive output with 0.2A sink and source capability for high-side switch QA. |
| 23 | VDD | power_in | Bias supply input in range 8V to 17V requiring 1μF ceramic bypass capacitor with low ESR and ESL. |
| 24 | GND | power_in | Ground reference node for all signals and power return with recommended separate quiet analog plane connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-24 |
| Category | Power Management (PMIC) |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage, VDD | VDD | -0.4 | 20 | V | 4 | ||
| Voltage on OUTA, OUTB, OUTC, OUTD, OUTE, OUTF | -0.4 | V | 4 | ||||
| Input voltage on DELAB, DELCD, DELEF, SS/EN, DCM, TMIN, RT, SYNC, RSUM, EA+, EA-, COMP, CS, ADEL, ADELEF | -0.4 | V | 4 | ||||
| Output voltage on VREF | -0.4 | 5.6 | V | 4 | |||
| Operating virtual junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Operating ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Lead temperature (soldering) | 300 | °C | soldering, 10 s | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VDD | 8 | 12 | 17 | V | 4 | |
| Operating junction temperature | -40 | 125 | °C | 4 | |||
| Converter switching frequency setting | FSW(nom) | 50 | 1000 | kHz | 4 | ||
| Programmable delay between OUTA, OUTB and OUTC, OUTD | 30 | 1000 | ns | set by resistors DELAB and DELCD and parameter KA | 4 | ||
| Maximum duty cycle, UCC28950 | DMAX | 90 | % | 4 | |||
| Programmable delay between OUTA, OUTF and OUTB, OUTE | 30 | 1400 | ns | set by resistor DELEF and parameter KEF | 4 | ||
| Programmable DCM as percentage of voltage at CS | 5 | 30 | % | 4 | |||
| Programmable TMIN | 100 | 800 | ns | 4 | |||
| Start threshold (UVLO) | UVLO_RTH | 6.75 | 7.9 | V | 6 | ||
| Minimum operating voltage after start (UVLO) | UVLO_FTH | 6.15 | 7.2 | V | 6 | ||
| Hysteresis (UVLO) | UVLO_HYST | 0.53 | 0.75 | V | 6 | ||
| Startup current | IDD(off) | 270 | µA | VDD = 5.2V | 6 | ||
| Operating supply current | IDD | 10 | mA | 6 | |||
| VREF total output range | VREF | 4.925 | 5.075 | V | 0 ≤ IR ≤ 20mA, 8V ≤ VDD ≤ 17V | 6 | |
| Short circuit current | ISCC | -53 | -23 | mA | VREF = 0V | 6 | |
| Switching frequency total range | FSW(nom) | 92 | 108 | kHz | 6 | ||
| Maximum duty cycle total range | DMAX | 97 | % | 6 | |||
| Synchronization phase total range | PHSYNC | 85 | 95 | °PH | RT = 59kΩ between RT and GND, Input pulses 200kHz, D = 0.5 at SYNC | 6 | |
| Synchronization frequency total range | FSYNC | 180 | 220 | kHz | RT = 59kΩ between RT and 5V; –40 °C ≤ TJ ≤ 125°C | 6 | |
| Pulse width | TPW | 2.2 | 2.8 | µs | 6 | ||
| Common-mode input voltage range | VICM | 0.5 | 3.6 | V | VICM range ensures parameters; functionality ensured for 3.6V < VICM < VREF + 0.4V, and –0.4V < VICM < 0.5V | 7 | |
| Offset voltage | VIO | -7 | 7 | mV | 7 | ||
| Input bias current | IBIAS | -1 | 1 | µA | 7 | ||
| High-level output voltage | EAHIGH | 3.9 | V | V(EA+) – V(EA–) = 500mV, IEAOUT = –0.5mA | 7 | ||
| Low-level output voltage | EALOW | 0.35 | V | V(EA+) – V(EA–) = –500mV, IEAOUT = 0.5mA | 7 | ||
| Error amplifier source current | ISOURCE | -8 | -0.5 | mA | 7 | ||
| Error amplifier sink current | ISINK | 2.7 | 5.75 | mA | 7 | ||
| CS pin cycle-by-cycle threshold | VCS_LIM | 1.94 | 2.06 | V | 7 | ||
| Discharge current to set cycle-by-cycle current limit duration | IDS | 15 | 25 | µA | VCS = 2.5V, VVSS = 4V | 7 | |
| Hiccup OFF time threshold | VHCC | 3.2 | 4.2 | V | 7 | ||
| Discharge current to set Hiccup Mode OFF time | IHCC | 1.9 | 3.2 | µA | 7 | ||
| Charge current | ISS | 20 | 30 | µA | VSS = 0V | 7 | |
| Shutdown, restart threshold | VSS_STD | 0.25 | 0.7 | V | 7 | ||
| Pullup threshold | VSS_PU | 3.3 | 4.3 | V | 7 | ||
| Clamp voltage | VSS_CL | 4.2 | 4.95 | V | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 93.3 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 24.2 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 47.9 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 0.7 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 47.4 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
UCC28950PWR - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
ucc28950pwr-etched.step/ucc28950pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc28950pwr.step/ucc28950pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (80 pp, sha256
a765d09f25ef27f8, retrieved 2026-09-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).