component
UCC2893PWR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/ucc2893pwr
f2aa10b
UCC2893PWR
Texas Instruments · AC-DC Controllers And Regulators · TSSOP-16
UCC2893PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RTDEL | input | Resistor to GND sets turn-on delay between OUT and AUX gate drive outputs. |
| 2 | RTON | input | Resistor to GND programs charge current for internal oscillator timing capacitor. |
| 3 | RTOFF | input | Resistor to GND programs discharge current for internal oscillator timing capacitor. |
| 4 | VREF | power_in | 5-V reference voltage output with 5-mA external load capability. |
| 5 | SYNC | input | Unidirectional synchronization input for locking internal oscillator to external clock. |
| 6 | GND | power_in | Analog ground reference for control and programming circuitry. |
| 7 | CS | input | Current sense input to PWM comparator and cycle-by-cycle current limiting circuit. |
| 8 | RSLOPE | input | Resistor to GND sets slope compensation ramp amplitude for current mode control. |
| 9 | FB | input | Feedback input from external error amplifier or optocoupler for PWM modulation. |
| 10 | SS/SD | input | Soft-start capacitor charging pin; also used for shutdown control and soft-stop. |
| 11 | PGND | power_in | Power ground for high-current gate drivers and output protection circuitry. |
| 12 | AUX | output | Auxiliary switch gate drive output with 2-A source and 2-A sink current capability. |
| 13 | OUT | output | Main power switch gate drive output with 2-A source and 2-A sink current capability. |
| 14 | VDD | power_in | Power supply for internal circuits, operating range 8.5 to 16.0 V with 1-µF bypass capacitor. |
| 15 | LINEUV | input | Line undervoltage monitoring input with 1.27-V threshold for shutdown control. |
| 16 | VIN | power_in | High-voltage startup input up to 110 V for initial bias power via internal JFET regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
UCC2893PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ucc2893pwr-etched.step/ucc2893pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc2893pwr.step/ucc2893pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
0b123b68deef52c5, retrieved 2026-09-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# UCC2893PWR
**Texas Instruments** · AC-DC Controllers And Regulators · TSSOP-16
UCC2893PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RTDEL | input | Resistor to GND sets turn-on delay between OUT and AUX gate drive outputs. |
| 2 | RTON | input | Resistor to GND programs charge current for internal oscillator timing capacitor. |
| 3 | RTOFF | input | Resistor to GND programs discharge current for internal oscillator timing capacitor. |
| 4 | VREF | power_in | 5-V reference voltage output with 5-mA external load capability. |
| 5 | SYNC | input | Unidirectional synchronization input for locking internal oscillator to external clock. |
| 6 | GND | power_in | Analog ground reference for control and programming circuitry. |
| 7 | CS | input | Current sense input to PWM comparator and cycle-by-cycle current limiting circuit. |
| 8 | RSLOPE | input | Resistor to GND sets slope compensation ramp amplitude for current mode control. |
| 9 | FB | input | Feedback input from external error amplifier or optocoupler for PWM modulation. |
| 10 | SS/SD | input | Soft-start capacitor charging pin; also used for shutdown control and soft-stop. |
| 11 | PGND | power_in | Power ground for high-current gate drivers and output protection circuitry. |
| 12 | AUX | output | Auxiliary switch gate drive output with 2-A source and 2-A sink current capability. |
| 13 | OUT | output | Main power switch gate drive output with 2-A source and 2-A sink current capability. |
| 14 | VDD | power_in | Power supply for internal circuits, operating range 8.5 to 16.0 V with 1-µF bypass capacitor. |
| 15 | LINEUV | input | Line undervoltage monitoring input with 1.27-V threshold for shutdown control. |
| 16 | VIN | power_in | High-voltage startup input up to 110 V for initial bias power via internal JFET regulator. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `UCC2893PWR`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `ucc2893pwr-etched.step` / `ucc2893pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc2893pwr.step` / `ucc2893pwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc2893.pdf) (41 pp, sha256 `0b123b68deef52c5`, retrieved 2026-09-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ucc2893pwr-datasheet.pdf)