← Commit history

Initial commit: component/ucc2893pwr

Ray ·f2aa10b743 ·
2 files changed +255
README.mdadded+52
@@ -0,0 +1,52 @@+# UCC2893PWR++**Texas Instruments** · AC-DC Controllers And Regulators · TSSOP-16++UCC2893PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RTDEL | input | Resistor to GND sets turn-on delay between OUT and AUX gate drive outputs. |+| 2 | RTON | input | Resistor to GND programs charge current for internal oscillator timing capacitor. |+| 3 | RTOFF | input | Resistor to GND programs discharge current for internal oscillator timing capacitor. |+| 4 | VREF | power_in | 5-V reference voltage output with 5-mA external load capability. |+| 5 | SYNC | input | Unidirectional synchronization input for locking internal oscillator to external clock. |+| 6 | GND | power_in | Analog ground reference for control and programming circuitry. |+| 7 | CS | input | Current sense input to PWM comparator and cycle-by-cycle current limiting circuit. |+| 8 | RSLOPE | input | Resistor to GND sets slope compensation ramp amplitude for current mode control. |+| 9 | FB | input | Feedback input from external error amplifier or optocoupler for PWM modulation. |+| 10 | SS/SD | input | Soft-start capacitor charging pin; also used for shutdown control and soft-stop. |+| 11 | PGND | power_in | Power ground for high-current gate drivers and output protection circuitry. |+| 12 | AUX | output | Auxiliary switch gate drive output with 2-A source and 2-A sink current capability. |+| 13 | OUT | output | Main power switch gate drive output with 2-A source and 2-A sink current capability. |+| 14 | VDD | power_in | Power supply for internal circuits, operating range 8.5 to 16.0 V with 1-µF bypass capacitor. |+| 15 | LINEUV | input | Line undervoltage monitoring input with 1.27-V threshold for shutdown control. |+| 16 | VIN | power_in | High-voltage startup input up to 110 V for initial bias power via internal JFET regulator. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `UCC2893PWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `ucc2893pwr-etched.step` / `ucc2893pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc2893pwr.step` / `ucc2893pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc2893.pdf) (41 pp, sha256 `0b123b68deef52c5`, retrieved 2026-09-27, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc2893pwr-datasheet.pdf)
page.jsonadded+203
@@ -0,0 +1,203 @@+{+  "slug": "ucc2893pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc2893pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc2893pwr.kicad_sym",+    "ucc2893pwr.kicad_mod",+    "ucc2893pwr.glb",+    "ucc2893pwr.step",+    "ucc2893pwr.lbr",+    "docs/hero.png",+    "docs/ucc2893pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC2893PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc2893.pdf",+    "parts": {+      "symbol": "ucc2893pwr.kicad_sym",+      "footprint": "ucc2893pwr.kicad_mod",+      "model_3d": "ucc2893pwr-etched.glb",+      "model_3d_plain": "ucc2893pwr.glb",+      "model_3d_step": "ucc2893pwr-etched.step",+      "model_3d_step_plain": "ucc2893pwr.step",+      "lbr": "ucc2893pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C702432",+      "digikey": "296-50460-2-ND",+      "mouser": "595-UCC2893PWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T13:26:48Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-50460-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-UCC2893PWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "RTDEL",+        "type": "input",+        "description": "Resistor to GND sets turn-on delay between OUT and AUX gate drive outputs."+      },+      {+        "number": "2",+        "name": "RTON",+        "type": "input",+        "description": "Resistor to GND programs charge current for internal oscillator timing capacitor."+      },+      {+        "number": "3",+        "name": "RTOFF",+        "type": "input",+        "description": "Resistor to GND programs discharge current for internal oscillator timing capacitor."+      },+      {+        "number": "4",+        "name": "VREF",+        "type": "power_in",+        "description": "5-V reference voltage output with 5-mA external load capability."+      },+      {+        "number": "5",+        "name": "SYNC",+        "type": "input",+        "description": "Unidirectional synchronization input for locking internal oscillator to external clock."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Analog ground reference for control and programming circuitry."+      },+      {+        "number": "7",+        "name": "CS",+        "type": "input",+        "description": "Current sense input to PWM comparator and cycle-by-cycle current limiting circuit."+      },+      {+        "number": "8",+        "name": "RSLOPE",+        "type": "input",+        "description": "Resistor to GND sets slope compensation ramp amplitude for current mode control."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Feedback input from external error amplifier or optocoupler for PWM modulation."+      },+      {+        "number": "10",+        "name": "SS/SD",+        "type": "input",+        "description": "Soft-start capacitor charging pin; also used for shutdown control and soft-stop."+      },+      {+        "number": "11",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground for high-current gate drivers and output protection circuitry."+      },+      {+        "number": "12",+        "name": "AUX",+        "type": "output",+        "description": "Auxiliary switch gate drive output with 2-A source and 2-A sink current capability."+      },+      {+        "number": "13",+        "name": "OUT",+        "type": "output",+        "description": "Main power switch gate drive output with 2-A source and 2-A sink current capability."+      },+      {+        "number": "14",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply for internal circuits, operating range 8.5 to 16.0 V with 1-µF bypass capacitor."+      },+      {+        "number": "15",+        "name": "LINEUV",+        "type": "input",+        "description": "Line undervoltage monitoring input with 1.27-V threshold for shutdown control."+      },+      {+        "number": "16",+        "name": "VIN",+        "type": "power_in",+        "description": "High-voltage startup input up to 110 V for initial bias power via internal JFET regulator."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 41,+        "cost_usd": 0.4122,+        "at": "2026-09-27T13:26:30"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/ucc2893.pdf",+        "pages": 41,+        "sha256": "0b123b68deef52c5",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file