main
Ray Publish 0.1.0 30319bf

UCC284DPTR-ADJ

Texas Instruments · Linear Voltage Regulators (LDO) · SOIC-8

UCC284DPTR-ADJ from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in This is the negative input supply; bypass it to GND with at least 1 µF of low ESR or ESL capacitance.
2 VIN power_in This is the negative input supply; bypass it to GND with at least 1 µF of low ESR or ESL capacitance.
3 SD/CT input Pulling this pin more positive than -0.7 V puts the regulator in low-current shutdown, and the timing capacitor between this pin and GND sets the overcurrent on-time; it must not be externally driven more negative than -5 V.
4 VOUT power_out This is the regulated negative output; a single 4.7-µF capacitor should be connected between this pin and GND.
5 GND power_in This is the low-noise ground reference input to which all voltages are measured.
6 VIN power_in This is the negative input supply; bypass it to GND with at least 1 µF of low ESR or ESL capacitance.
7 VOUTS input This is the feedback pin that senses the output voltage; for the ADJ version it is connected to the center tap of the external resistor divider between VOUT and GND, or directly to VOUT for a -1.25 V output.
8 VIN power_in This is the negative input supply; bypass it to GND with at least 1 µF of low ESR or ESL capacitance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage (TA = 25°C) -1.27 -1.25 -1.23 V TA = 25°C 4
Reference voltage (over temperature) -1.275 -1.215 V Over temperature 4
Line regulation 0.5 3 mV VIN = -3.5 V to -15 V, VOUT = VOUTS 4
Load regulation 0.1 0.18 % IOUT = 0 mA to 0.5 A 4
Dropout voltage VOUT, VIN 0.25 0.5 V IOUT 0.5 A, VOUT = -3.15 V 4
Dropout voltage, VOUT, VIN VOUT, VIN 25 50 mV IOUT 50 mA, VOUT = -3.15 V 4
Sense pin input current 100 250 nA 4
Input voltage range VIN -15 -3.5 V 4
Undervoltage lockout -3.2 -2.95 -2.7 V 4
Quiescent current, charge pump on 200 350 µA VIN = -3.15 V, See Note 1 4
Quiescent current 200 250 µA VIN = -15 V 4
Quiescent current in shutdown (0°C to 85°C) 15 45 µA VIN = -13 V, SD/CT = 0 V, TA = 0°C to 85°C, See Note 2 4
Quiescent current in shutdown (-40°C to 0°C) 100 µA VIN = -13 V, SD/CT = 0 V, TA = -40°C to 0°C, See Note 2 4
Shutdown threshold -1 -0.7 -0.4 V At shutdown pin (SD/CT) 4
Shutdown input current 5 10 25 µA SD/CT = 0V 4
Output leakage in shutdown 1 50 µA VIN = -15V, VOUT = 0 V, See Note 3 4
Peak current limit 0.7 1.1 1.5 A VOUT = 0 V 4
Overcurrent threshold 0.55 0.7 0.9 A 4
Current limit duty cycle 2.5 4 % VOUT = 0 V 4
Overcurrent time out tON 300 500 700 µs VOUT = 0 V 4
Input voltage range (VIN) VIN -16 V 2
Shutdown voltage range SD/CT -5 6 V 2
Operating virtual junction temperature range TJ -55 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Lead temperature (soldering) 300 °C Soldering, 10 seconds 2
Thermal resistance, junction-to-ambient (θja) θja 40 70 °C/W Mounted on 5 square inch pad of 1-ounce copper 14
Thermal resistance, junction-to-case (θjc) θjc 22 °C/W SOIC-8 DP package 14
Overtemperature shutdown 140 °C 4
Overtemperature hysteresis 20 °C 4
Output noise voltage 200 µVRMS BW = 10 Hz to 10 kHz, TA = 25°C 4

CAD (KiCad official)

  • Symbol: UCC284DPTR-ADJ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc284dptr-adj-etched.step / ucc284dptr-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc284dptr-adj.step / ucc284dptr-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 a48d7b1d12c4e7aa, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF