Generated by kicad-footprint-generator · KiCad file format 20260206
UCC284DPTR-ADJ
Texas Instruments · Linear Voltage Regulators (LDO) · SOIC-8
UCC284DPTR-ADJ from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | This is the negative input supply; bypass it to GND with at least 1 µF of low ESR or ESL capacitance. |
| 2 | VIN | power_in | This is the negative input supply; bypass it to GND with at least 1 µF of low ESR or ESL capacitance. |
| 3 | SD/CT | input | Pulling this pin more positive than -0.7 V puts the regulator in low-current shutdown, and the timing capacitor between this pin and GND sets the overcurrent on-time; it must not be externally driven more negative than -5 V. |
| 4 | VOUT | power_out | This is the regulated negative output; a single 4.7-µF capacitor should be connected between this pin and GND. |
| 5 | GND | power_in | This is the low-noise ground reference input to which all voltages are measured. |
| 6 | VIN | power_in | This is the negative input supply; bypass it to GND with at least 1 µF of low ESR or ESL capacitance. |
| 7 | VOUTS | input | This is the feedback pin that senses the output voltage; for the ADJ version it is connected to the center tap of the external resistor divider between VOUT and GND, or directly to VOUT for a -1.25 V output. |
| 8 | VIN | power_in | This is the negative input supply; bypass it to GND with at least 1 µF of low ESR or ESL capacitance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (TA = 25°C) | -1.27 | -1.25 | -1.23 | V | TA = 25°C | 4 | |
| Reference voltage (over temperature) | -1.275 | -1.215 | V | Over temperature | 4 | ||
| Line regulation | 0.5 | 3 | mV | VIN = -3.5 V to -15 V, VOUT = VOUTS | 4 | ||
| Load regulation | 0.1 | 0.18 | % | IOUT = 0 mA to 0.5 A | 4 | ||
| Dropout voltage | VOUT, VIN | 0.25 | 0.5 | V | IOUT 0.5 A, VOUT = -3.15 V | 4 | |
| Dropout voltage, VOUT, VIN | VOUT, VIN | 25 | 50 | mV | IOUT 50 mA, VOUT = -3.15 V | 4 | |
| Sense pin input current | 100 | 250 | nA | 4 | |||
| Input voltage range | VIN | -15 | -3.5 | V | 4 | ||
| Undervoltage lockout | -3.2 | -2.95 | -2.7 | V | 4 | ||
| Quiescent current, charge pump on | 200 | 350 | µA | VIN = -3.15 V, See Note 1 | 4 | ||
| Quiescent current | 200 | 250 | µA | VIN = -15 V | 4 | ||
| Quiescent current in shutdown (0°C to 85°C) | 15 | 45 | µA | VIN = -13 V, SD/CT = 0 V, TA = 0°C to 85°C, See Note 2 | 4 | ||
| Quiescent current in shutdown (-40°C to 0°C) | 100 | µA | VIN = -13 V, SD/CT = 0 V, TA = -40°C to 0°C, See Note 2 | 4 | |||
| Shutdown threshold | -1 | -0.7 | -0.4 | V | At shutdown pin (SD/CT) | 4 | |
| Shutdown input current | 5 | 10 | 25 | µA | SD/CT = 0V | 4 | |
| Output leakage in shutdown | 1 | 50 | µA | VIN = -15V, VOUT = 0 V, See Note 3 | 4 | ||
| Peak current limit | 0.7 | 1.1 | 1.5 | A | VOUT = 0 V | 4 | |
| Overcurrent threshold | 0.55 | 0.7 | 0.9 | A | 4 | ||
| Current limit duty cycle | 2.5 | 4 | % | VOUT = 0 V | 4 | ||
| Overcurrent time out | tON | 300 | 500 | 700 | µs | VOUT = 0 V | 4 |
| Input voltage range (VIN) | VIN | -16 | V | 2 | |||
| Shutdown voltage range | SD/CT | -5 | 6 | V | 2 | ||
| Operating virtual junction temperature range | TJ | -55 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Lead temperature (soldering) | 300 | °C | Soldering, 10 seconds | 2 | |||
| Thermal resistance, junction-to-ambient (θja) | θja | 40 | 70 | °C/W | Mounted on 5 square inch pad of 1-ounce copper | 14 | |
| Thermal resistance, junction-to-case (θjc) | θjc | 22 | °C/W | SOIC-8 DP package | 14 | ||
| Overtemperature shutdown | 140 | °C | 4 | ||||
| Overtemperature hysteresis | 20 | °C | 4 | ||||
| Output noise voltage | 200 | µVRMS | BW = 10 Hz to 10 kHz, TA = 25°C | 4 |
CAD (KiCad official)
- Symbol:
UCC284DPTR-ADJ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc284dptr-adj-etched.step/ucc284dptr-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc284dptr-adj.step/ucc284dptr-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
a48d7b1d12c4e7aa, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).