main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ucc28251rgpr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ucc28251rgpr-etched.glb Publish 0.1.0 · Ray
ucc28251rgpr-etched.step ucc28251rgpr: factory component page (tier=mfr) · Ray
ucc28251rgpr-hero.glb ucc28251rgpr: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc28251rgpr-hero.overlay.json Publish 0.1.0 · Ray
ucc28251rgpr.glb Publish 0.1.0 · Ray
ucc28251rgpr.kicad_mod Publish 0.1.0 · Ray
ucc28251rgpr.kicad_sym Publish 0.1.0 · Ray
ucc28251rgpr.lbr Publish 0.1.0 · Ray
ucc28251rgpr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 21 pins · Ray

UCC28251RGPR

Texas Instruments · AC-DC Controllers And Regulators · QFN-20-EP(4x4)

UCC28251RGPR from Texas Instruments, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF/EA+ input Non-inverting input of the internal error amplifier, with a common-mode input range of 0 V to 3.0 V.
2 FB/EA- input Inverting input of the internal error amplifier, with a maximum allowed voltage of 3.7 V.
3 COMP bidirectional Error amplifier output and PWM comparator input; the PWM comparator's maximum input common-mode voltage is 2.8 V, and the RAMP peak is suggested to stay below 2.3 V.
4 GND power_in Ground reference for the whole device; all signal returns should be tied to this pin.
5 VDD power_in Bias supply input with a recommended range of 4.7 V to 17 V (12 V nominal), an absolute maximum of 20 V, and a minimum 1-µF bypass capacitor.
6 SRB output Synchronous rectifier output with 0.2-A sink/source capability; an external gate driver is required.
7 SRA output Synchronous rectifier output with 0.2-A sink/source capability; an external gate driver is required.
8 OUTB output Primary switching output with 0.2-A sink/source capability; an external gate driver is required.
9 OUTA output Primary switching output with 0.2-A sink/source capability; an external gate driver is required.
10 HICC input An external capacitor from this pin to GND sets the cycle-by-cycle current-limit shutdown delay and the hiccup restart time, which is about 100 times the shutdown delay.
11 PS input Sets the primary-off to synchronous-rectifier-on dead time through an external resistor (5 kΩ to 250 kΩ); tying it to VREF gives zero dead time.
12 SP input Sets the synchronous-rectifier-off to primary-on dead time through an external resistor (5 kΩ to 250 kΩ); tying it to VREF gives zero dead time.
13 SS bidirectional Soft-start programming pin charged by a 27-µA internal current source through an external capacitor.
14 VSENSE input Output voltage sense input for pre-bias control, with an input voltage range of 0 V to 3.3 V.
15 RT input Oscillator frequency set by an external resistor (12.5 kΩ to 200 kΩ), or an external synchronization clock input.
16 RAMP/CS input Multifunction pin used as the PWM ramp input for voltage mode or the current-sense input for current mode, with a recommended voltage range of 0 V to 2.3 V.
17 ILIM input Cycle-by-cycle over-current sense input with a current-limit threshold of 0.497 V to 0.513 V (0.505 V typical).
18 EN input Device enable/disable input with a trigger threshold of 1.5 V to 2.25 V (2.0 V typical).
19 OVP/OTP input Over-voltage and over-temperature fault input; a voltage above 0.7 V shuts down the outputs, followed by hiccup restart, with 8.5-µA internal hysteresis current.
20 VREF power_out 3.3-V reference output that requires a 0.47-µF to 2.2-µF bypass capacitor and is internally current limited to 25 mA (typical).
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package QFN-20-EP(4x4)
Category Power Management (PMIC)
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range, VDD VDD 4.7 12 17 V 5
VREF bypass capacitor 0.47 2.2 µF 5
Error amplifier input common mode range (REF/EA+, FB/EA-) 0 3 V 5
VSENSE input voltage range 0 3.3 V 5
RT resistor range 12.5 200 kΩ 5
PS, SP resistor range 5 250 kΩ 5
RAMP/CS voltage range 0 2.3 V 5
Operating junction temperature range TJ -40 150 °C 5
Input supply voltage VDD VDD -0.3 20 V 5
Output voltage on OUTA, OUTB, SRA and SRB (printed max VDD + 0.3 V) -0.3 V 5
COMP voltage (printed max VREF + 0.3 V) -0.3 V 5
Input voltages on SS and EN -0.3 5.5 V 5
Input voltages on RT, PS, SP, ILIM, OVP, HICC, VSENSE, EA+ and EA- -0.3 3.6 V 5
Input voltage on RAMP/CS -0.3 4.3 V 5
Output voltage on VREF -0.3 3.6 V 5
Storage temperature Tstg -65 150 °C 5
Startup current IDD(off) 150 275 µA VDD = 3.6 V 6
Operating supply current IDD 1.2 2 2.5 mA 100-pF capacitor on OUTA, OUTB, SRA and SRB 6
Standby current IDD(dis) 250 425 600 µA EN = 0 V 6
Start threshold (UVLO rising) VUVLOR 4 4.3 4.65 V 6
Minimum operating voltage after start (UVLO falling) VUVLOF 3.8 4.1 4.4 V 6
UVLO hysteresis 0.15 0.2 0.25 V 6
Soft-start charge current ISS 26 28 30 µA VSS = 0 V 6
Soft-start clamp voltage VSS(max) 3.3 3.6 4 V 6
Enable trigger threshold 1.5 2 2.25 V 6
High-level COMP voltage 2.8 3 V 6
Low-level COMP voltage 0.3 0.4 V 6
Error amplifier input offset -16.2 18 mV 6
Error amplifier open loop gain 70 100 dB 6
COMP sink current ICOMP(snk) 3 6.5 9 mA 6
COMP source current ICOMP(src) 2 4.5 8 mA 6
Nominal switching frequency at OUTA or OUTB set by RT FSW(nom) 90 98 106 kHz RT/SYNC = 75 kΩ, RSP = 20 kΩ 7
Minimum switching frequency set by external sync frequency FSW(min_sync) 42 kHz fRT/SYNC = 50 kHz 7
Maximum switching frequency set by external sync frequency FSW(max_sync) 945 kHz fRT/SYNC = 2.5 MHz 7
VREF output voltage VVREF 3.17 3.25 3.33 V VDD = from 7 V to 17 V, IVREF = 2 mA 7
VREF output voltage (load) VVREF 3.17 3.25 3.33 V 0 < IREF < 10 mA 7
VREF short circuit current 12 25 40 mA VREF = 3 V, TJ = 25 °C 7
ILIM cycle-by-cycle threshold VILIM 0.497 0.505 0.513 V 7
Propagation delay from ILIM to OUTA and OUTB (RGP package) TPDILIM 15 25 36 ns Exclude leading edge blanking (UCC28251RGP) 7
Leading edge blanking TBLANK 35 60 90 ns 7
Current limit shutdown delay timing program current 55 75 95 µA Measured at HICC pin 7
Hiccup timing program current 2 2.7 3.5 µA Measured at HICC pin 7
Current limit shutdown delay timer threshold at HICC VHICC_SD 0.55 0.6 0.65 V 7
HICC pull-up threshold VHICC_PU 2.25 2.4 2.5 V 7
Hiccup restart threshold VHICC_RST 0.25 0.3 0.35 V 7
RAMP/CS clamp voltage VCS(max) 3.5 4 4.5 V 10-V ramp charging voltage source with 40-kΩ current limiting resistor 7
OVP/OTP internal reference VOVP 0.66 0.7 0.74 V 8
OVP/OTP internal current IOVP 6 8.5 11 µA 8
Primary output source resistance RSRC 12 20 35 Ω IOUT = 20 mA 8
Primary output sink resistance RSNK 4 12 30 Ω IOUT = 20 mA 8
Synchronous rectifier output source resistance (VDD = 12 V) RSRC 12 20 35 Ω IOUT = 20 mA, VDD = 12 V 8
Synchronous rectifier output source resistance (VDD = 5 V) RSRC 15 25 45 Ω IOUT = 20 mA, VDD = 5 V 8
Synchronous rectifier output sink resistance RSNK 4 12 30 Ω IOUT = 20 mA, VDD = 12 V 8
Primary off to secondary on dead time (PS = VREF) TDPS -5 0 7.5 ns PS = VREF 8
Primary off to secondary on dead time (PS = 27 kΩ) TDPS 25 38 48 ns PS = 27 kΩ 8
Secondary off to primary on dead time (SP = VREF) TDSP -5 0 7.5 ns SP = VREF 8
Secondary off to primary on dead time (SP = 20 kΩ) TDSP 33 43 55 ns SP = 20 kΩ 8
Junction-to-ambient thermal resistance (RGP, with hot spot) RθJA 126 °C/W with hot spot 6
Junction-to-ambient thermal resistance (RGP, without hot spot) RθJA 104 °C/W without hot spot 6
Junction-to-case (bottom) thermal resistance (RGP) RθJC(bot) 0.8 °C/W 6

CAD (KiCad official)

  • Symbol: UCC28251RGPR
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: ucc28251rgpr-etched.step / ucc28251rgpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28251rgpr.step / ucc28251rgpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 67008ba993940d0e, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF