component
UCC2813DTR-2
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 21d ago |
| viewers | 21d ago |
| package.json | 21d ago |
| page.json | 21d ago |
| README.md | 21d ago |
| ucc2813dtr-2-etched.glb | 21d ago |
| ucc2813dtr-2-etched.step | 21d ago |
| ucc2813dtr-2-hero.glb | 20d ago |
| ucc2813dtr-2-hero.overlay.json | 21d ago |
| ucc2813dtr-2.glb | 21d ago |
| ucc2813dtr-2.kicad_mod | 21d ago |
| ucc2813dtr-2.kicad_sym | 21d ago |
| ucc2813dtr-2.lbr | 21d ago |
| ucc2813dtr-2.step | 21d ago |
UCC2813DTR-2
Texas Instruments · AC-DC Controllers And Regulators · SOIC-8
UCC2813DTR-2 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | COMP is the error amplifier output and the PWM comparator input, with feedback loop compensation applied between this pin and FB, and the internal error amplifier has a current limit. |
| 2 | FB | input | FB is the inverting input of the error amplifier, and its trace should be kept short with minimal stray capacitance for best stability. |
| 3 | CS | input | CS is the input to the current-sense comparators (PWM and overcurrent), connected directly to the MOSFET source sense resistor, with 100 ns internal leading-edge blanking. |
| 4 | RC | input | RC is the oscillator timing pin, where an external resistor from REF and a capacitor to GND set the switching frequency and maximum duty cycle; the datasheet recommends RT of 10 kΩ to 200 kΩ and CT of 100 pF to 1000 pF and says RT must never be below 10 kΩ. |
| 5 | GND | power_in | GND is the reference ground and power ground for all device functions, and the datasheet recommends separating the signal return path from the high-current gate-driver path. |
| 6 | OUT | output | OUT is the high-current power driver output for the power MOSFET gate, capable of peak drive current above ±750 mA (up to ±1 A), and is actively held low when VCC is below the UVLO threshold. |
| 7 | VCC | power_in | VCC is the device bias supply input, normally fed from a low-impedance source through a current-limiting resistor and bypassed to GND with a 0.1 µF ceramic capacitor, with an internal zener clamp of about 13.5 V typical and a 12 V absolute maximum supply rating. |
| 8 | REF | output | REF is the voltage reference for the error amplifier and logic supply, providing 5 V for UCCx813-[0,1,2,4] (4 V for UCCx813-[3,5]), and requires a ceramic bypass capacitor of at least 0.1 µF to GND with a recommended REF output current of 5 mA maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC2813DTR-2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc2813dtr-2-etched.step/ucc2813dtr-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc2813dtr-2.step/ucc2813dtr-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (53 pp, sha256
e691a7fcf4f2163a, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).