UCC28083PW

{
  "schema_version": 1,
  "type": "component",
  "slug": "ucc28083pw",
  "title": "UCC28083PW",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc28083pw",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UCC28083PW",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28083.pdf",
    "parts": {
      "symbol": "ucc28083pw.kicad_sym",
      "footprint": "ucc28083pw.kicad_mod",
      "model_3d": "ucc28083pw-hero.glb",
      "model_3d_plain": "ucc28083pw.glb",
      "model_3d_step": "ucc28083pw-etched.step",
      "model_3d_step_plain": "ucc28083pw.step",
      "lbr": "ucc28083pw.lbr"
    },
    "distributor_links": {
      "lcsc": "C2869568",
      "digikey": "2156-UCC28083PW-ND",
      "mouser": "595-UCC28083PW"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T16:53:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-UCC28083PW-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "595-UCC28083PW",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUTB",
        "type": "output",
        "description": "Alternating high-current push-pull output stage rated for 500 mA peak source and 1 A peak sink to drive a power MOSFET gate, with about 110 ns dead time against OUTA."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Reference ground and power ground for all functions, and a low-impedance circuit board ground plane is highly recommended due to high currents and high-frequency operation."
      },
      {
        "number": "3",
        "name": "RT",
        "type": "input",
        "description": "Oscillator programming pin: a timing resistor from RT to GND sets fOSC, with a recommended resistor range of 25 kΩ to 698 kΩ and a nominal RT voltage of 1.5 V (1.2 V to 1.6 V)."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Current-sense input to the PWM comparator, cycle-by-cycle current limit and overcurrent comparator, where exceeding the 0.75 V typical overcurrent threshold causes a soft-start cycle, and the absolute maximum is −0.3 V to VDD + 0.3 V and not more than 6 V."
      },
      {
        "number": "5",
        "name": "ISET",
        "type": "input",
        "description": "Current selection for slope compensation, where a resistor RSET from ISET to ground sets the ramp so that IRAMP peak = 5 × ISET peak."
      },
      {
        "number": "6",
        "name": "CTRL",
        "type": "input",
        "description": "Error voltage input to the PWM comparator, with an internal divider ratio of 0.45 and an absolute maximum range of −0.3 V to VDD + 0.3 V."
      },
      {
        "number": "7",
        "name": "VDD",
        "type": "power_in",
        "description": "Power input connection with an absolute maximum of 15 V at IDD < 10 mA, requiring a 1 µF decoupling capacitor to GND as close to the chip as possible."
      },
      {
        "number": "8",
        "name": "OUTA",
        "type": "output",
        "description": "Alternating high-current push-pull output stage rated for 500 mA peak source and 1 A peak sink to drive a power MOSFET gate, switching at half the oscillator frequency."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The TSSOP layout note on page 10 says 'RT and OUTB (pins 6 and 8)', which conflicts with the PW pin ; PW pin numbers were read from the text extraction of the page 2 'PW PACKAGE (TOP VIEW)' drawing, whe"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0908,
        "at": "2026-10-08T16:52:55"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc28083.pdf",
        "pages": 28,
        "sha256": "19bab60962d5c6f5",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc28083pw.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "cf28a51742b2e31065e201d1b313207140cbfb49062efd938788f7a310d02738",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc28083pw-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b607dbdadc630c13477b88e9461d6cd6cb7c98625e6c01bfd0109f087744c92d",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-8",
      "Category": "Power Management (PMIC)",
      "Pins": "8"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ucc28083pw"
  ],
  "discovery_pitch": "UCC28083PW (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc28083pw.kicad_sym",
    "ucc28083pw.kicad_mod",
    "ucc28083pw.glb",
    "ucc28083pw.step",
    "ucc28083pw.lbr",
    "docs/hero.png",
    "docs/ucc28083pw-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc28083pw-hero.glb",
    "ucc28083pw-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}