component
UCC28083PW
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 20d ago |
| viewers | 20d ago |
| package.json | 20d ago |
| page.json | 20d ago |
| README.md | 20d ago |
| ucc28083pw-etched.glb | 20d ago |
| ucc28083pw-etched.step | 20d ago |
| ucc28083pw-hero.glb | 20d ago |
| ucc28083pw-hero.overlay.json | 20d ago |
| ucc28083pw.glb | 20d ago |
| ucc28083pw.kicad_mod | 20d ago |
| ucc28083pw.kicad_sym | 20d ago |
| ucc28083pw.lbr | 20d ago |
| ucc28083pw.step | 20d ago |
UCC28083PW
Texas Instruments · AC-DC Controllers And Regulators · TSSOP-8
UCC28083PW from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTB | output | Alternating high-current push-pull output stage rated for 500 mA peak source and 1 A peak sink to drive a power MOSFET gate, with about 110 ns dead time against OUTA. |
| 2 | GND | power_in | Reference ground and power ground for all functions, and a low-impedance circuit board ground plane is highly recommended due to high currents and high-frequency operation. |
| 3 | RT | input | Oscillator programming pin: a timing resistor from RT to GND sets fOSC, with a recommended resistor range of 25 kΩ to 698 kΩ and a nominal RT voltage of 1.5 V (1.2 V to 1.6 V). |
| 4 | CS | input | Current-sense input to the PWM comparator, cycle-by-cycle current limit and overcurrent comparator, where exceeding the 0.75 V typical overcurrent threshold causes a soft-start cycle, and the absolute maximum is −0.3 V to VDD + 0.3 V and not more than 6 V. |
| 5 | ISET | input | Current selection for slope compensation, where a resistor RSET from ISET to ground sets the ramp so that IRAMP peak = 5 × ISET peak. |
| 6 | CTRL | input | Error voltage input to the PWM comparator, with an internal divider ratio of 0.45 and an absolute maximum range of −0.3 V to VDD + 0.3 V. |
| 7 | VDD | power_in | Power input connection with an absolute maximum of 15 V at IDD < 10 mA, requiring a 1 µF decoupling capacitor to GND as close to the chip as possible. |
| 8 | OUTA | output | Alternating high-current push-pull output stage rated for 500 mA peak source and 1 A peak sink to drive a power MOSFET gate, switching at half the oscillator frequency. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC28083PW - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ucc28083pw-etched.step/ucc28083pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc28083pw.step/ucc28083pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
19bab60962d5c6f5, retrieved 2026-10-08, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).