main
History Download
Ray Initial commit: component/ucc28070pwr 93e1a7b

UCC28070PWR

Texas Instruments · AC-DC Controllers And Regulators · TSSOP-20

UCC28070PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CDR input Frequency-dithering rate programming capacitor to ground; connect to VREF to disable dithering.
2 RDM input Frequency-dithering magnitude resistor to ground; external clock synchronization input when CDR > 5V.
3 VAO output Voltage error amplifier output internally connected to multiplier and zero-power comparator; connect voltage loop compensation network between this pin and GND.
4 VSENSE input Output voltage sense input to voltage error amplifier inverting input and current synthesis difference amplifier positive terminal; connect to PFC output with resistor-divider network.
5 VINAC input Scaled AC line input voltage internally connected to multiplier and current synthesis difference amplifier negative terminal; connect resistor-divider network with matching attenuation to VSENSE divider.
6 IMO output Multiplier output current node; connect resistor between this pin and GND to set multiplier gain with voltage range 0 to 3.3V.
7 RSYNTH input Current synthesis down-slope programming resistor to GND for setting current synthesizer rate, 15kΩ to 750kΩ range; connect to VREF to disable current synthesis.
8 CSB input Phase-B inductor current sense input internally connected to inverting input of phase-B current amplifier through current synthesis stage; 0 to 3.6V input range.
9 CSA input Phase-A inductor current sense input internally connected to inverting input of phase-A current amplifier through current synthesis stage; 0 to 3.6V input range.
10 PKLMT input Peak current limit threshold programming input via resistor-divider network from VREF to GND; voltage threshold range 0 to 4V.
11 CAOB output Phase-B current amplifier output internally connected to inverting input of phase-B PWM comparator; connect current loop compensation network between this pin and GND.
12 CAOA output Phase-A current amplifier output internally connected to inverting input of phase-A PWM comparator; connect current loop compensation network between this pin and GND.
13 VREF power_out 6V regulated reference voltage output for internal biasing and external use; bypass with 0.1μF ceramic capacitor, external load limited to 2mA.
14 GDA output Phase-A gate driver output for connecting to external gate-drive device; ±0.25A continuous and ±0.75A pulsed current rating, typically clamped at 13.5V.
15 VCC power_in Bias voltage input with operating range 10V to 21V and UVLO enable threshold at 10.2V ±0.4V; bypass with 0.1μF ceramic capacitor.
16 GND power_in Device ground reference; connect all compensation and programming networks to this pin via separate high-current noise isolation trace.
17 GDB output Phase-B gate driver output for connecting to external gate-drive device; ±0.25A continuous and ±0.75A pulsed current rating, typically clamped at 13.5V.
18 SS input Soft-start and external fault interface; connect capacitor to GND to program soft-start ramp with internal 10μA current source, or pull below 0.6V to immediately disable gate drivers.
19 RT input Oscillator frequency programming resistor to GND; switching frequency fPWM = 7500/RRT(kΩ) with minimum 30kHz for UCC28070.
20 DMAX input Maximum PWM duty-cycle programming resistor to GND; DMAX = 0.5(RDMX/RRT + 1) with typical operating range 92% to 98%.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Power Management (PMIC)
Pins 20

CAD (KiCad official)

  • Symbol: UCC28070PWR
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: ucc28070pwr-etched.step / ucc28070pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28070pwr.step / ucc28070pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 632656aea01a2438, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF