main
Ray ucc28063adr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 1e7034a
{
  "schema_version": 1,
  "type": "component",
  "slug": "ucc28063adr",
  "title": "UCC28063ADR",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc28063adr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UCC28063ADR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28063a.pdf",
    "parts": {
      "symbol": "ucc28063adr.kicad_sym",
      "footprint": "ucc28063adr.kicad_mod",
      "model_3d": "ucc28063adr-etched.glb",
      "model_3d_plain": "ucc28063adr.glb",
      "model_3d_step": "ucc28063adr-etched.step",
      "model_3d_step_plain": "ucc28063adr.step",
      "lbr": "ucc28063adr.lbr"
    },
    "distributor_links": {
      "lcsc": "C3093798"
    },
    "pins": [
      {
        "number": "1",
        "name": "ZCDB",
        "type": "input",
        "description": "Zero-current detection input for phase B with 1.0V falling threshold and 1.7V rising threshold; input clamped between 0V and 3V."
      },
      {
        "number": "2",
        "name": "VSENSE",
        "type": "input",
        "description": "Output voltage sense input regulated to 6.0V reference with 1.25V enable threshold; overvoltage protection thresholds at 6.48V and 6.67V."
      },
      {
        "number": "3",
        "name": "TSET",
        "type": "input",
        "description": "Timing set resistor input to ground (66.5kΩ to 400kΩ range) for programming PWM on-time factor and minimum switching period between 25kHz and 50kHz."
      },
      {
        "number": "4",
        "name": "PHB",
        "type": "input",
        "description": "Phase B enable/disable control input; below 0.8V threshold disables phase B and phase-fail detection; above 1.0V threshold enables two-phase operation."
      },
      {
        "number": "5",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier transconductance output for voltage-regulation loop compensation with 55µS small-signal gain and 5X large-signal gain; output range 0V to 4.95V."
      },
      {
        "number": "6",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground connection for signal bypass capacitors, compensation networks, and analog circuit returns; star-connected with PGND to minimize differential voltage."
      },
      {
        "number": "7",
        "name": "VINAC",
        "type": "input",
        "description": "Input AC voltage sense from rectified mains voltage divider with brownout threshold at 1.39V and dropout threshold at 0.35V; input range 0V to 6V."
      },
      {
        "number": "8",
        "name": "HVSEN",
        "type": "input",
        "description": "High voltage output sense for FailSafe overvoltage protection with 4.87V fault threshold and 4.67V clear threshold; triggers PWMCNTL output when above 2.5V."
      },
      {
        "number": "9",
        "name": "PWMCNTL",
        "type": "tri_state",
        "description": "Open-drain PWM control output for downstream converter enable/disable; pulled low when HVSEN exceeds 2.5V with no FailSafe overvoltage or phase-fail condition."
      },
      {
        "number": "10",
        "name": "CS",
        "type": "input",
        "description": "Current sense input for cycle-by-cycle overcurrent protection with -200mV threshold in dual-phase mode and -166mV in single-phase mode; 100ns blanking after gate transitions."
      },
      {
        "number": "11",
        "name": "GDB",
        "type": "output",
        "description": "Gate drive output for phase B power MOSFET with 1A source and 1.8A sink capability; output voltage clamped at 13.5V nominal."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_in",
        "description": "Bias supply voltage input from regulated 14V to 21V source with maximum 20mA input current; bypass with 0.1µF ceramic capacitor located close to pin."
      },
      {
        "number": "13",
        "name": "PGND",
        "type": "power_in",
        "description": "Power stage ground connection for gate drive and power supply return; star-connected with AGND to minimize DC and high-frequency voltage differential."
      },
      {
        "number": "14",
        "name": "GDA",
        "type": "output",
        "description": "Gate drive output for phase A power MOSFET with 1A source and 1.8A sink capability; output voltage clamped at 13.5V nominal."
      },
      {
        "number": "15",
        "name": "VREF",
        "type": "power_in",
        "description": "Voltage reference output providing regulated 6.00V ±0.18V for device internal circuits and external biasing with ±2mA load current capability."
      },
      {
        "number": "16",
        "name": "ZCDA",
        "type": "input",
        "description": "Zero-current detection input for phase A with 1.0V falling threshold and 1.7V rising threshold; input clamped between 0V and 3V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 46,
        "cost_usd": 0.5394,
        "at": "2026-09-23T04:15:32"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc28063a.pdf",
        "pages": 46,
        "sha256": "e28a2680b1f9ffa9",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc28063adr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc28063adr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "0cf26698859a3b60b0ab504922d2c0bff7351033e854b9c254998dfdb8eff7a9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-16",
      "Category": "Power Management (PMIC)",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ucc28063adr"
  ],
  "discovery_pitch": "UCC28063ADR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc28063adr.kicad_sym",
    "ucc28063adr.kicad_mod",
    "ucc28063adr.glb",
    "ucc28063adr.step",
    "ucc28063adr.lbr",
    "docs/hero.png",
    "docs/ucc28063adr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T13:38:04.635Z"
}