component
UCC28063ADR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
ucc28063adr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
1e7034a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223
{
"slug": "ucc28063adr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"ucc28063adr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ucc28063adr.kicad_sym",
"ucc28063adr.kicad_mod",
"ucc28063adr.glb",
"ucc28063adr.step",
"ucc28063adr.lbr",
"docs/hero.png",
"docs/ucc28063adr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "UCC28063ADR",
"manufacturer": "Texas Instruments",
"package": "SOIC-16",
"pin_count": 16,
"category": "Power Management (PMIC)",
"subcategory": "AC-DC Controllers And Regulators",
"datasheet": "https://www.ti.com/lit/ds/symlink/ucc28063a.pdf",
"parts": {
"symbol": "ucc28063adr.kicad_sym",
"footprint": "ucc28063adr.kicad_mod",
"model_3d": "ucc28063adr-etched.glb",
"model_3d_plain": "ucc28063adr.glb",
"model_3d_step": "ucc28063adr-etched.step",
"model_3d_step_plain": "ucc28063adr.step",
"lbr": "ucc28063adr.lbr"
},
"distributor_links": {
"lcsc": "C3093798"
},
"pins": [
{
"number": "1",
"name": "ZCDB",
"type": "input",
"description": "Zero-current detection input for phase B with 1.0V falling threshold and 1.7V rising threshold; input clamped between 0V and 3V."
},
{
"number": "2",
"name": "VSENSE",
"type": "input",
"description": "Output voltage sense input regulated to 6.0V reference with 1.25V enable threshold; overvoltage protection thresholds at 6.48V and 6.67V."
},
{
"number": "3",
"name": "TSET",
"type": "input",
"description": "Timing set resistor input to ground (66.5kΩ to 400kΩ range) for programming PWM on-time factor and minimum switching period between 25kHz and 50kHz."
},
{
"number": "4",
"name": "PHB",
"type": "input",
"description": "Phase B enable/disable control input; below 0.8V threshold disables phase B and phase-fail detection; above 1.0V threshold enables two-phase operation."
},
{
"number": "5",
"name": "COMP",
"type": "output",
"description": "Error amplifier transconductance output for voltage-regulation loop compensation with 55µS small-signal gain and 5X large-signal gain; output range 0V to 4.95V."
},
{
"number": "6",
"name": "AGND",
"type": "power_in",
"description": "Analog ground connection for signal bypass capacitors, compensation networks, and analog circuit returns; star-connected with PGND to minimize differential voltage."
},
{
"number": "7",
"name": "VINAC",
"type": "input",
"description": "Input AC voltage sense from rectified mains voltage divider with brownout threshold at 1.39V and dropout threshold at 0.35V; input range 0V to 6V."
},
{
"number": "8",
"name": "HVSEN",
"type": "input",
"description": "High voltage output sense for FailSafe overvoltage protection with 4.87V fault threshold and 4.67V clear threshold; triggers PWMCNTL output when above 2.5V."
},
{
"number": "9",
"name": "PWMCNTL",
"type": "tri_state",
"description": "Open-drain PWM control output for downstream converter enable/disable; pulled low when HVSEN exceeds 2.5V with no FailSafe overvoltage or phase-fail condition."
},
{
"number": "10",
"name": "CS",
"type": "input",
"description": "Current sense input for cycle-by-cycle overcurrent protection with -200mV threshold in dual-phase mode and -166mV in single-phase mode; 100ns blanking after gate transitions."
},
{
"number": "11",
"name": "GDB",
"type": "output",
"description": "Gate drive output for phase B power MOSFET with 1A source and 1.8A sink capability; output voltage clamped at 13.5V nominal."
},
{
"number": "12",
"name": "VCC",
"type": "power_in",
"description": "Bias supply voltage input from regulated 14V to 21V source with maximum 20mA input current; bypass with 0.1µF ceramic capacitor located close to pin."
},
{
"number": "13",
"name": "PGND",
"type": "power_in",
"description": "Power stage ground connection for gate drive and power supply return; star-connected with AGND to minimize DC and high-frequency voltage differential."
},
{
"number": "14",
"name": "GDA",
"type": "output",
"description": "Gate drive output for phase A power MOSFET with 1A source and 1.8A sink capability; output voltage clamped at 13.5V nominal."
},
{
"number": "15",
"name": "VREF",
"type": "power_in",
"description": "Voltage reference output providing regulated 6.00V ±0.18V for device internal circuits and external biasing with ±2mA load current capability."
},
{
"number": "16",
"name": "ZCDA",
"type": "input",
"description": "Zero-current detection input for phase A with 1.0V falling threshold and 1.7V rising threshold; input clamped between 0V and 3V."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 46,
"cost_usd": 0.5394,
"at": "2026-09-23T04:15:32"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ucc28063a.pdf",
"pages": 46,
"sha256": "e28a2680b1f9ffa9",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ucc28063adr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ucc28063adr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "0cf26698859a3b60b0ab504922d2c0bff7351033e854b9c254998dfdb8eff7a9",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}