main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ucc2804qdrq1: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ucc2804qdrq1-etched.glb Publish 0.1.0 · Ray
ucc2804qdrq1-etched.step ucc2804qdrq1: factory component page (tier=mfr) · Ray
ucc2804qdrq1-hero.glb ucc2804qdrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc2804qdrq1-hero.overlay.json Publish 0.1.0 · Ray
ucc2804qdrq1.glb Publish 0.1.0 · Ray
ucc2804qdrq1.kicad_mod Publish 0.1.0 · Ray
ucc2804qdrq1.kicad_sym Publish 0.1.0 · Ray
ucc2804qdrq1.lbr Publish 0.1.0 · Ray
ucc2804qdrq1.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

UCC2804QDRQ1

Texas Instruments · AC-DC Controllers & Regulators · SOIC-8

UCC2804QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Output of the low-impedance 2-MHz error amplifier and input of the PWM comparator; it can source and sink current, is internally current-limited so forcing it to GND commands zero duty cycle, and carries the soft-start clamp.
2 FB input Inverting input of the error amplifier; keep lead length and stray capacitance as small as possible for best stability.
3 CS input Input to the PWM and overcurrent comparators with 100-ns leading-edge blanking after the OUT rising edge; exceeding the overcurrent threshold causes a soft-start cycle.
4 RC input Oscillator timing pin: resistor from REF to RC (10 kΩ to 200 kΩ recommended) and capacitor from RC to GND (100 pF to 1000 pF) set the frequency.
5 GND power_in Reference ground and power ground for all functions on the part.
6 OUT output High-current gate driver output capable of peak currents exceeding ±750 mA (±1 A absolute maximum), actively held low when VCC is below the UVLO threshold.
7 VCC power_in Power input, fed through a current-limiting resistor with 12 V absolute maximum from a low-impedance source and 30 mA maximum current; bypass with at least 1 µF in parallel with 0.1 µF ceramic to GND.
8 REF power_out Voltage reference output (5 V, or 4 V for UCC2803/05) bypassed with at least 0.1 µF ceramic to GND; extra bypassing is needed for loads above 2.5 mA, and it is pulled to ground through 5 kΩ when VCC is below UVLO.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference output voltage VREF 4.925 5 5.075 V TJ=25°C, I=0.2 mA, UCC2804-Q1 7
Reference load regulation 10 30 mV 0.2 mA < I < 5 mA 7
Reference line regulation 1.9 2.5 mV/V VCC=10 V to clamp (IVCC=25 mA); typ at TJ=25°C, max at TJ=-40°C to 125°C 7
Reference total variation 4.88 5 5.1 V UCC2804-Q1 7
Output noise voltage 130 µV 10 Hz ≤ f ≤ 10 kHz, TJ=25°C 7
Long term stability 5 mV TA=125°C, 1000 hours 7
Reference output short circuit -35 -5 mA 7
Oscillator frequency 40 46 52 kHz UCC2804-Q1 7
Oscillator temperature stability 2.5 % 7
Oscillator amplitude peak-to-peak 2.25 2.4 2.55 V 7
Oscillator peak voltage 2.45 V 7
Error amplifier input voltage 2.44 2.5 2.56 V COMP = 2.5 V, UCC2804-Q1 7
Error amplifier input bias current -1 1 µA 7
Open loop voltage gain 60 80 dB 7
COMP sink current 0.3 3.5 mA FB = 2.7 V, COMP = 1.1 V 7
COMP source current -0.8 -0.5 -0.2 mA FB = 1.8 V, COMP = REF, 1.2 V 7
Gain bandwidth product 2 MHz 7
Maximum duty cycle 48 49 50 % UCC2804-Q1 8
Current sense gain 1.1 1.65 1.8 V/V 0 ≤ VCS ≤ 0.8 V 8
Current sense maximum input signal 0.9 1 1.1 V COMP = 5 V 8
Current sense input bias current -200 200 nA 8
CS blank time 50 100 150 ns 8
Overcurrent threshold 1.42 1.55 1.68 V 8
COMP to CS offset 0.45 0.9 1.35 V CS = 0 V 8
OUT low level 0.1 0.4 V I = 20 mA, all parts 8
OUT low level 0.35 0.9 V I = 200 mA, all parts 8
OUT low level 0.7 1.2 V I = 20 mA, VCC = 0 V, all parts 8
OUT high VSAT (VCC-OUT) 0.15 0.4 V I = 20 mA, all parts 8
OUT high VSAT (VCC-OUT) 1 1.9 V I = 200 mA, all parts 8
Rise time 41 70 ns CL = 1 nF 8
Fall time 44 75 ns CL = 1 nF 8
UVLO start threshold 11.5 12.5 13.5 V UCC2802-Q1 and UCC2804-Q1 8
UVLO stop threshold 7.6 8.3 9 V UCC2802-Q1 and UCC2804-Q1 8
Start to stop hysteresis 3.5 4.2 5.1 V UCC2802-Q1 and UCC2804-Q1 8
COMP rise time 4 10 ms FB = 1.8 V, rise from 0.5 V to REF, 1 V 8
Start-up current 0.1 0.2 mA VCC < start threshold 8
Operating supply current 0.5 1 mA FB = 0 V, CS = 0 V 8
VCC internal Zener voltage 12 13.5 15 V ICC = 10 mA 8
VCC internal Zener voltage minus start threshold voltage 0.5 1 V UCC2802-Q1 and UCC2804-Q1 8
VCC voltage 12 V driven from low impedance source, ICC not exceeding 30 mA 6
VCC current 30 mA 6
OUT current -1 1 A 6
OUT energy (capacitive load) 20 µJ 6
Analog inputs (FB, CS, RC, COMP) -0.3 6.3 V 6.3 or VCC + 0.3, return the lesser 6
Power dissipation, D package 0.65 W TA < 25°C 6
Lead temperature, soldering 300 °C 10 s 6
Storage temperature Tstg -65 150 °C 6
Junction temperature TJ -55 150 °C 6
ESD HBM V(ESD) -2500 2500 V per AEC Q100-002, D package 6
ESD CDM V(ESD) -1500 1500 V per AEC Q100-011, D package 6
VCC bias supply voltage VVCC 11 V from low impedance source 6
Voltage on analog pins VFB, VCS, VRC, VCOMP -0.1 6 V 6 or VVCC 6
Gate driver output voltage VOUT -0.1 V max VVCC 6
Supply bias current IVCC 25 mA 6
Average OUT pin current IOUT 20 mA 6
REF pin output current IREF 5 mA 6
Oscillator frequency fOSC 1 MHz 6
Operating free-air temperature TA -55 125 °C 6
Junction temperature TJ -55 125 °C 6
Junction-to-ambient thermal resistance RθJA 107.5 °C/W D (SOIC) 8 pins 7
Junction-to-case (top) thermal resistance RθJC(top) 49.3 °C/W D (SOIC) 8 pins 7
Junction-to-board thermal resistance RθJB 48.7 °C/W D (SOIC) 8 pins 7

CAD (KiCad official)

  • Symbol: UCC2804QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc2804qdrq1-etched.step / ucc2804qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc2804qdrq1.step / ucc2804qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 8f4c7912c58a9b47, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF